WP1703SURC

T-1 3/4 (5mm) ROUND LED LAMP WP1703SURC HYPER RED Features OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. I.C. COMPATIBLE. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. S PEC NO: DSAF2452 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/28/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 4 ERP: 1101002433 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. WP1703SURC HYPER RED (InGaAlP) WATER CLEAR 280 Typ. 700 Viewing Angle 2 θ 1/2 50° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Hyper Red 170 30 185 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V S PEC NO: DSAF2452 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/28/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 4 ERP: 1101002433 Hyper Red WP1703SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF2452 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/28/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 4 ERP: 1101002433 PACKING & LABEL SPECIFICATIONS WP1703SURC S PEC NO: DSAF2452 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/28/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 4 ERP: 1101002433