WP2523SURC

T-1 3/4 (5mm) ROUND LED LAMP PRELIMINARY SPEC WP2523SURC HYPER RED Features OOUTSTANDING MATERIAL EFFICIENCY. ORELIABLE AND RUGGED. OI.C. COMPATIBLE. ORoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimension s Notes: 1. All dimensions are in millimeters (inches) . 2. T olerance is ± 0 .25(0.01") unless otherwise noted . 3. Lead spacing is measured where the lead emerge from the package. 4 . Specifications are subject to change without notice . S PEC NO: DSAF2454 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1101002943 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. WP2523SURC HYPER RED (InGaAlP) WATER CLEAR 1200 Typ. 4000 Viewing Angle 2 θ 1/2 12° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Hyper Red 170 30 185 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V S PEC NO: DSAF2454 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1101002943 Hyper Red WP2523SURC S PEC NO: DSAF2454 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1101002943 PACKING & LABEL SPECIFICATIONS WP2523SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF2454 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1101002943