WP34AD

T-1 (3mm) SOLID STATE LAMP WP34AD AMBER Features LOW POWER CONSUMPTION. POPULAR T-1 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Description The Amber source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2285 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1101003383 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 10mA Min. WP34AD AMBER (GaAsP/GaP) AMBER DIFFUSED 3 Typ. 12 Viewing Angle 2 θ 1/2 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Amber Amber Amber Amber Amber Amber Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Amber 105 30 140 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V SPEC NO: DSAF2285 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1101003383 Amber WP34AD SPEC NO: DSAF2285 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1101003383 PACKING & LABEL SPECIFICATIONS WP34AD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2285 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1101003383