WP34SF6C

T-1 (3mm) INFRA-RED EMITTING DIODE WP34SF6C Features MECHANICALLY AND SPECTRALLY MATCHED TO THE WP32P3C PHOTOTRANSISTOR. WATER CLEAR LENS. RoHS COMPLIANT. Description SF6 Made with Gallium Aluminum Arsenide Infrared Emitting diodes. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. S PEC NO: DSAF2291 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP: 1101003574 Selection Guide Part No. Dice Lens Type Po (mW/sr) @ 20 mA*50mA Min. 7 WP34SF6C GaAlAs WATER CLEAR *10 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA. Viewing Angle 2θ1/2 50° 50° Typ. 15 *40 Electrical / Optical Characteristics at TA=25°C Item Forward Voltage Reverse Current Junction Capacitance Peak Spectral Wavelength Spectral Bandwidth P/N SF6 SF6 SF6 SF6 SF6 Symbol VF IR C λP ∆λ1/2 Typ. 1.35 30 860 50 Max. 1.6 10 Units V uA pF nm nm Condition IF=20mA VR=5V VF=0V;f=1MHz IF=20mA IF=20mA Absolute Maximum Ratings at TA=25°C Item Power dissipation Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/100 Duty Cycle, 10us Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Symbol PT IF iFS VR Topr Tstg SF6 100 50 1 5 -40°C To +85°C -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA A V S PEC NO: DSAF2291 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP: 1101003574 WP34SF6C S PEC NO: DSAF2291 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP: 1101003574 PACKING & LABEL SPECIFICATIONS WP34SF6C Remarks: If special sorting is required (e.g. binning based on forward voltage or radiant intensity), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF2291 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/16/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP: 1101003574