WP36BHD

T-1 (3mm) BLINKING LED LAMP Part Number: WP36BHD Bright Red Features T-1 PACKAGEWITH RECTANGULAR BASE. WITH BUILT-IN BLINKING IC. OPERATION VOLTAGE FROM 3.5V TO 14V. BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz. RoHS COMPLIANT. Description The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101003773 Selection Guide Part No. Dice Lens Type Iv (mcd) V= 9V Min. WP36BHD Bright Red (GaP) RED DIFFUSED 1 Typ. 2 Viewing Angle [1] 2θ1/2 60 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD Δλ1/2 IF ISON ISON f Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Forward Current Supply Current Supply Current Blink Frequency Device Bright Red Bright Red Bright Red Bright Red Bright Red Bright Red Bright Red 1.5 8 Min. Typ. 700 660 45 22 8 44 3 Max. Units nm nm nm mA mA mA Hz Min:VF=3.5V Typ:VF=5V VF=3.5V VF=14V VF=3.5V~14V Test Conditions Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Forward Voltage Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature [1] Lead Solder Temperature [2] Notes: 1. 2mm below package base. 2. 5mm below package base. Bright Red 310 14 0.5 -40°C To +70°C -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW V V SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101003773 Bright Red WP36BHD SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101003773 PACKING & LABEL SPECIFICATIONS WP36BHD SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101003773 SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101003773 SPEC NO: DSAE8732 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101003773