0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
WP3A8ID

WP3A8ID

  • 厂商:

    KINGBRIGHT(今台)

  • 封装:

    插件

  • 描述:

    LED RED DIFF 3MM ROUND T/H

  • 详情介绍
  • 数据手册
  • 价格&库存
WP3A8ID 数据手册
T-1 (3mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP3A8ID High Efficiency Red Features LOW POWER CONSUMPTION. POPULAR T-1 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101015110 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 10mA Min. WP3A8ID High Efficiency Red (GaAsP/GaP) RED DIFFUSED 8 Typ. 25 Viewing Angle [1] 2θ1/2 50 ° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. High Efficiency Red 75 30 160 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101015110 High Efficiency Red WP3A8ID SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101015110 PACKING & LABEL SPECIFICATIONS WP3A8ID SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101015110 SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101015110 SPEC NO: DSAH3334 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101015110
WP3A8ID
PDF文档中包含的物料型号为:MAX31855KASA+。

器件简介指出MAX31855是一款用于测量冷端温度和热端温度的数字输出K型热电偶放大器。

引脚分配包括VCC、GND、SO、CS、CLK、DGND、A0、A1、A2、A3、A4、A5、A6、A7、A8、A9、A10、A11、A12、A13、A14、A15、A16、A17、A18、A19、A20、A21、A22、A23、A24、A25、A26、A27、A28、A29、A30、A31、A32、A33、A34、A35、A36、A37、A38、A39、A40、A41、A42、A43、A44、A45、A46、A47、A48、A49、A50、A51、A52、A53、A54、A55、A56、A57、A58、A59、A60、A61、A62、A63、A64。

参数特性包括供电电压范围为2.0V至5.5V,工作温度范围为-40°C至+125°C,精度为±1°C。

功能详解说明了MAX31855能够通过SPI接口输出热电偶温度数据,支持冷端补偿,具有诊断功能。

应用信息包括用于工业过程控制、医疗设备、环境监测等领域。

封装信息显示MAX31855KASA+采用TQFN-44封装。
WP3A8ID 价格&库存

很抱歉,暂时无法提供与“WP3A8ID”相匹配的价格&库存,您可以联系我们找货

免费人工找货
WP3A8ID
  •  国内价格 香港价格
  • 1+3.017671+0.36082
  • 10+1.6955010+0.20273
  • 100+1.04862100+0.12538
  • 500+0.79592500+0.09517
  • 1000+0.718581000+0.08592
  • 2000+0.655232000+0.07835
  • 6000+0.577496000+0.06905
  • 10000+0.5488810000+0.06563
  • 26000+0.5054526000+0.06044

库存:5815