WP406A10XHA/3GD

1.8mm TRI-LEVEL LED INDICATOR Part Number: WP406A10XHA/3GD Green Features Description z Pre-trimmed leads for pc mounting. The Green source color devices are made with Gallium z Black case enhances contrast ratio. Phosphide Green Light Emitting Diode. z High reliability life measured in years. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM7856 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: JAN/02/2013 PAGE: 1 OF 5 DRAWN: Y.Liu ERP: 1102014896 Selection Guide Part No. Dice WP406A10XHA/3GD Iv (mcd) [2] @ 10mA Lens Type Green (GaP) Viewing Angle [1] Min. Typ. 2θ1/2 6 12 70° Green Diffused Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAM7856 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: JAN/02/2013 PAGE: 2 OF 5 DRAWN: Y.Liu ERP: 1102014896 Green SPEC NO: DSAM7856 APPROVED: WYNEC WP406A10XHA/3GD REV NO: V.2B CHECKED: Allen Liu DATE: JAN/02/2013 PAGE: 3 OF 5 DRAWN: Y.Liu ERP: 1102014896 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAM7856 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu WP406A10XHA/3GD DATE: JAN/02/2013 PAGE: 4 OF 5 DRAWN: Y.Liu ERP: 1102014896 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM7856 APPROVED: WYNEC REV NO: V.2B CHECKED: Allen Liu DATE: JAN/02/2013 PAGE: 5 OF 5 DRAWN: Y.Liu ERP: 1102014896