WP59EGW/CA

T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: WP59EGW/CA High Efficiency Red Green Features Description z Uniform light output. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z 3 leads with one common lead. Light Emitting Diode. z Long life-solid state reliability. The Green source color devices are made with Gallium z RoHS compliant. Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 3 6 3 8 High Efficiency Red (GaAsP/GaP) WP59EGW/CA Viewing Angle [1] 2θ1/2 60° White Diffused Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 WP59EGW/CA High Efficiency Red SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 Green SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 PACKING & LABEL SPECIFICATIONS WP59EGW/CA SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757 SPEC NO: DSAF2649 REV NO: V.4 DATE: SEP/23/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1101005757