WP7104ALUP-2ID-0L

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: WP7104ALUP/2ID-0L High Efficiency Red Features I.C. COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE. HIGH RELIABILITY LIFE MEASURED IN YEARS. HOUSING MATERIAL: PPA. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3814 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1102009882 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 10mA Min. WP7104ALUP/2ID-0L High Efficiency Red (GaAsP/GaP) RED DIFFUSED 8 Typ. 20 Viewing Angle [1] 2θ1/2 40 ° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=10mA IF=10mA IF=10mA VF=0V;f=1MHz IF=10mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. High Efficiency Red 75 30 160 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH3814 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1102009882 High Efficiency Red WP7104ALUP/2ID-0L SPEC NO: DSAH3814 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1102009882 WP7104ALUP/2ID-0L Tape Specifications (Units : mm) SPEC NO: DSAH3814 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1102009882 PACKING & LABEL SPECIFICATIONS WP7104ALUP/2ID-0L SPEC NO: DSAH3814 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1102009882