WP7104QBC/G

T-1 (3mm) SOLID STATE LAMP Part Number: WP7104QBC/G Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Blue source color devices are made with InGaN Light z Popular T-1 diameter package. Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAJ8698 REV NO: V.3 DATE: DEC/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.ZHU PAGE: 1 OF 4 ERP: 1101018566 Selection Guide Part No. Dice WP7104QBC/G Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 1100 2300 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 461 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAJ8698 REV NO: V.3 DATE: DEC/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.ZHU PAGE: 2 OF 4 ERP: 1101018566 Blue WP7104QBC/G SPEC NO: DSAJ8698 REV NO: V.3 DATE: DEC/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.ZHU PAGE: 3 OF 4 ERP: 1101018566 PACKING & LABEL SPECIFICATIONS WP7104QBC/G SPEC NO: DSAJ8698 REV NO: V.3 DATE: DEC/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.Q.ZHU PAGE: 4 OF 4 ERP: 1101018566