WP710A10ED

T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10ED Orange Features Description z Low power consumption. The Orange source color devices are made with Gallium z Popular T-1 diameter package. Arsenide Phosphide on Gallium Phosphide Orange Light z General purpose leads. Emitting Diode. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205 Selection Guide Part No. Dice WP710A10ED Iv (mcd) [2] @ 10mA Lens Type Orange (GaAsP/GaP) Min. Typ. 20 30 *10 *20 Orange Diffused Viewing Angle [1] 2θ1/2 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA Orange 617 nm IF=20mA Spectral Line Half-width Orange 45 nm IF=20mA C Capacitance Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Orange 2 2.5 V IF=20mA IR Reverse Current Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205 Orange WP710A10ED SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205 PACKING & LABEL SPECIFICATIONS WP710A10ED SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205 SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAL0497 REV NO: V.3A DATE: FEB/15/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029205