WP710A10NT

T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10NT Pure Orange Features Description z Low power consumption. The Pure Orange source color devices are made with Gal- z Popular T-1 diameter package. lium Arsenide Phosphide on Gallium Phosphide Pure Or- z General purpose leads. ange Light Emitting Diode. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 Selection Guide Part No. Dice WP710A10NT Iv (mcd) [2] @ 10mA Lens Type Pure Orange (GaAsP/GaP) Orange Transparent Min. Typ. 15 40 *12 *30 Viewing Angle [1] 2θ1/2 34° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Pure Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 607 nm IF=20mA Pure Orange 602 nm IF=20mA Spectral Line Half-width Pure Orange 35 nm IF=20mA C Capacitance Pure Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Pure Orange 2.05 2.5 V IF=20mA IR Reverse Current Pure Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Pure Orange Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 145 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 Pure Orange WP710A10NT SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 PACKING & LABEL SPECIFICATIONS WP710A10NT SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070