WP7113GD

T-1 3/4 (5mm) SOLID STATE LAMP WP7113GD GREEN Features LOW POWER CONSUMPTION. POPULAR T-1 3/4 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. S PEC NO: DSAE9335 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1101005001 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 10mA Min. WP7113GD GREEN (InGaAIP) GREEN DIFFUSED 5 Typ. 20 Viewing Angle 2θ1/2 30° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Green 105 25 140 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V S PEC NO: DSAE9335 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1101005001 Green WP7113GD S PEC NO: DSAE9335 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1101005001 PACKING & LABEL SPECIFICATIONS WP7113GD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAE9335 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1101005001