WP7113PBC/A

T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113PBC/A PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zLow power consumption. The Blue source color devices are made with InGaN zPopular T-1 3/4 diameter package. on SiC Light Emitting Diode. zGeneral purpose leads. Static electricity and surge damage the LEDS. zReliable and rugged. It is recommended to use a wrist band or anti-electrostatic zLong life - solid state reliability. glove when handling the LEDs. zAvailable on tape and reel. All devices, equipment and machinery must be electrically zRoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF0040 REV NO: V.8 DATE: FEB/24/2009 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101013155-01 Selection Guide Part No. Dice WP7113PBC/A Lens Type Blue (InGaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 480 1600 16° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF0040 REV NO: V.8 DATE: FEB/24/2009 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101013155-01 Blue WP7113PBC/A SPEC NO: DSAF0040 REV NO: V.8 DATE: FEB/24/2009 PAGE: 3 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101013155-01 PACKING & LABEL SPECIFICATIONS WP7113PBC/A SPEC NO: DSAF0040 REV NO: V.8 DATE: FEB/24/2009 PAGE: 4 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101013155-01