WP7113PBC/Z

T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113PBC/Z PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Blue source color devices are made with InGaN Light z Popular T-1 3/4 diameter package. Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 1 OF 6 ERP: 1101020961 Selection Guide Part No. Dice WP7113PBC/Z Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 2500 5500 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 458 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 22 nm IF=20mA C Capacitance Blue 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 3.7 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 2 OF 6 ERP: 1101020961 Blue WP7113PBC/Z SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 3 OF 6 ERP: 1101020961 PACKING & LABEL SPECIFICATIONS WP7113PBC/Z SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 4 OF 6 ERP: 1101020961 SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 5 OF 6 ERP: 1101020961 SPEC NO: DSAG9882 REV NO: V.4 DATE: JAN/05/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu PAGE: 6 OF 6 ERP: 1101020961