WP7113ZGC

T-1 3/4 (5mm) SOLID STATE LAMP Part Number: WP7113ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Green source color devices are made with InGaN z Popular T-1 3/4 diameter package. on Sapphire Light Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148 Selection Guide Part No. Dice WP7113ZGC Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 8000 14000 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148 Green WP7113ZGC SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148 PACKING & LABEL SPECIFICATIONS WP7113ZGC SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148 SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148 SPEC NO: DSAF0944 REV NO: V.7 DATE: MAR/16/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101012148