WP7676CSURC

7.6mmX7.6mm SUPER FLUX LED LAMP WP7676CSURC HYPER RED Features S UPER FLUX OUTPUT. DESIGN FOR HIGH CURRENT OPERATION. O UTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. S PEC NO: DSAF2276 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/15/2005 DRAWN: B.H.LI PAGE: 1 OF 3 ERP: 1101007267 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA *70mA Min. 280 WP7676CSURC HYPER RED (InGaAlP) WATER CLEAR *480 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width. 3.Drive current between 10mA and 30mA are recommended for long term performance. 4.Operation at current below 10mA is not recommended. Viewing Angle 2 θ 1/2 70° Typ. 500 *1000 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Hyper Red 170 30 185 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V S PEC NO: DSAF2276 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/15/2005 DRAWN: B.H.LI PAGE: 2 OF 3 ERP: 1101007267 Hyper Red WP7676CSURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF2276 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: APR/15/2005 DRAWN: B.H.LI PAGE: 3 OF 3 ERP: 1101007267