WP7677C2SEC-J

SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7677C2SEC/J Technical Data Features: * High Luminance output. * Design for High Current Operation. * Uniform Color. * Low Power Consumption. * Low Thermal Resistance. * Low Profile. * Packaged in tubes for use with automatic insertion equiment. * RoHs Compliant. Benefits: *Outstanding Material Efficiency. *Electricity savings. *Maintenance savings. *Reliable and Rugged. Typical Applications: *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. SPEC NO: DSAG8595 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1101018712 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER DC Forward Current Power dissipation Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature[1] SE/J 70 217 5 -40 To +85 -55 To +85 260°C For 5 Seconds UNITS mA mW V °C °C 1.1.5mm[0.06inch]below seating plane. SPEC NO: DSAG8595 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1101018712 Selection Guide Iv(cd)[1] @70mA Min. WP7677C2SEC/J Hyper Orange (AlGaInP) 12 Typ. 35 Viewing Angle[2] 2θ1/2 Typ. 30 ° Part No. LED COLOR Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=70mA Rθj-a=200°C/W DEVICE TYPE PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH Δλ1/2(nm) TYP. SE/J 640 630 25 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C FORWARD VOLTAGE [1] VF (VOLTS) @ IF=70mA MIN. TYP. MAX. REVERSE CURRENT IR (uA) @ VR=5V MAX. CAPACITANCE C (pF) @ VF=0V F=1MHZ TYP. THERMAL RESISTANCE Rθj -pin °C/W TYP. DEVICE TYPE SE/J 1.9 2.2 3.1 10 27 125 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAG8595 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1101018712 Figures SPEC NO: DSAG8595 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1101018712 PACKING & LABEL SPECIFICATIONS WP7677C2SEC/J SPEC NO: DSAG8595 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1101018712