WP835-2IDT

5mmx10mm LIGHT BAR Part Number: WP835/2IDT High Efficiency Red Features UNIFORM LIGHT EMITTING AREA. EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY STANDARD SOCKETS. FLUSH MOUNTABLE. EXCELLENT ON/OFF CONTRAST. CAN BE USED WITH PANELS AND LEGEND MOUNTS. MECHANICALLY RUGGED. I.C. COMPATIBLE. BOTTOM SURFACE OF EPOXY IS NOT FLAT. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101007748 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 10mA Min. WP835/2IDT High Efficiency Red (GaAsP/GaP) RED DIFFUSED 5 Typ. 10 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. High Efficiency Red 75 30 160 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101007748 High Efficiency Red WP835/2IDT SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101007748 PACKING & LABEL SPECIFICATIONS WP835/2IDT SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101007748 SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101007748 SPEC NO: DSAF2705 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/23/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101007748