AEC-Q200
Automotive Grade
Capacitors
AEC-Q200 Automotive Grade Capacitors
At Knowles Precision Devices (KPD) we manufacture Single Layer,
Multilayer, High Reliability and Precision Variable Capacitors; EMI
Filters and Thin Film Devices.
One of our fields of expertise is the design and manufacture of
components important to engineers in the automotive industry.
Today’s vehicles have many electronic control units that enable
absolute precision and control.
The Automotive Electronics Council (AEC) Component Technical
Committee is the standardization body for establishing standards
for reliable, high quality electronic components. Components
meeting these specifications are suitable for use in the harsh
automotive environment without additional component-level
qualification testing.
Contents
electrical devices including ceramic capacitors.
KPD’s Syfer brand has developed a range of MLC capacitors and
surface mount EMI filters qualified to AEC-Q200 rev D to meet the
needs of high reliability and automotive manufacturers.
Traction Inverter
Automotive Grade - AEC-Q200 ranges - C0G/NP0 (1B)......................................................... 18-19
Automotive Grade - AEC-Q200 ranges - X7R (2R1).............................................................. 20-21
Chip Ordering Information......................................................................................................22
StackiCap™ - X7R (2R1).........................................................................................................23
Safety Certified Capacitors................................................................................................. 24-26
Open Mode - C0G/NP0 (1B) & X7R (2R1).................................................................................27
Tandem - X7R (2R1)...............................................................................................................28
High Temperature - X8R - 150ºC.............................................................................................29
Ultra-low ESR HiQ MLCCs - X8G range................................................................................ 30-31
SM EMI Filters
Surface Mount EMI Filters - E01 & E07................................................................................ 32-33
X2Y Integrated Passive Components - E03.......................................................................... 34-35
On-Board
AC/DC Charger
(Typical 11kW)
(3.3kW-20kW)
1210-3640
630V-3kV - C0G/NP0 (1B)
1808-2220
250V-4kV - C0G/NP0 (1B)
X7R (2R1)
MLC
Capacitors
Please refer to the following pages for details of the product
ranges offered.
Wireless Power
Charging
(1.5kW-5kW)
Dielectric classifications and characteristics.............................................................................4-6
FlexiCap™...............................................................................................................................7
IECQ-CECC and AEC-Q200 Periodic Tests...................................................................................8
Manufacturing processes..........................................................................................................9
Testing..................................................................................................................................10
Regulations and Compliance...................................................................................................11
Explanation on Ageing of MLC.................................................................................................12
Handling, Storage, Soldering and Mechanical Precautions..................................................... 13-14
Packaging Information - Ceramic chip capacitors................................................................. 15-16
Chip Dimensions....................................................................................................................17
Knowles Suzhou (China), Norwich (England) & Penang (Malaysia)
facilities are accredited to IATF 16949:2016 for the design,
manufacture and supply of AEC-Q200 qualified MLCC components.
The Component Technical Committee established AEC-Q200
“Stress Test Qualification for Passive Components” to define the
minimum stress test driven qualification requirements for passive
E-Compressor Inverter
General &
Technical
Introduction
0805-3640
250V-4kV - C0G/NP0 (1B)
X7R (2R1)
1206-2220
250Vac - Safety X1/Y2
630V-1.5kV
C0G/NP0 (1B)
X7R (2R1)
Wireless Power
Charger Tx
Wireless Power
Charger Rx
E-Compressor
Motor
12V
Load
Grid
OBC
DC/DC
H/V
Battery
Traction
Inverter
AEC-Q200 approved ranges - pages 18-21
StackiCap™ Capacitors - page 23
Safety Certified Capacitors - pages 24-26
Open Mode & Tandem Capacitors - pages 27-28
High Temperature Capacitors - pages 29-31
Surface Mount EMI Filters - pages 32-35
BMS
PTC
Heater
Boost
DC/DC
FC
H2
Station
PTC Heater Controller
Battery Management
System
1206-3640
630V-4kV - X7R (2R1) Caps
1nF-1µF
E01/E07 EMI Filter
Fuel Cell Booster
Converter
DC/DC Converter
1812-3640
1206-2220
250V-2kV - X7R (2R1)
1nF-1µF
FlexiCap™
500V-2kV - C0G/NP0 (1B)
X7R (2R1) up to 2.2µF
(1kW-3kW)
0805-3640
1kV-4kV - X7R (2R1) Caps
100pF-10nF
Open Mode & Tandem Caps
Electric / New Energy Vehicle - BEV/HEV/PHEV/FCV
2
www.knowlescapacitors.com
www.knowlescapacitors.com
3
Dielectric characteristics
Dielectric characteristics
Class I Dielectrics
Class II Dielectrics
dielectric characteristics with negligible dependence of capacitance
and dissipation factor with time, voltage and frequency. They
exhibit the following characteristics:-
Multilayer Ceramic Capacitors are generally divided into classes
which are defined by the capacitance temperature characteristics
over specified temperature ranges. These are designated by alpha
numeric codes. Code definitions are summarised below and are also
available in the relevant national and international specifications.
a) Time does not significantly affect capacitance and dissipation
factor (Tan δ) – no ageing.
b) Capacitance and dissipation factor are not affected by voltage.
c) Linear temperature coefficient.
Capacitors within this class have a dielectric constant range from
10 to 100. They are used in applications which require ultra stable
Ordering code
C0G/
NP0 (1B)
(Porcelain)
P90
(Porcelain)
C0G/NP0 (1B)
X8G
Capacitance
Tolerance
Dielectric
strength
Voltage applied
for 5 seconds.
Charging
current limited
to 50mA
maximum.
Climatic
category (IEC)
Ultra stable
Stable
X7R (2R1)
X8R
Stable
Class II
High Temperature
Stable
Stable
Ultra stable
Ultra stable
Ultra stable
-
-
1B/CG
-
-
-
-
2C1
2R1
2X1
-
-
-
IECQ-CECC
EIA
C0G/NP0 (1B)
P90
C0G/NP0 (1B)
X8G
-
-
X5R
-
X7R (2R1)
-
X8R
-
-
EIA
MIL
-
-
CG (BP)
-
-
-
-
BZ
-
BX
-
-
-
MIL
DLI
CF
AH
-
-
-
-
-
-
-
-
-
-
DLI
-
-
Novacap
-
-
-
N, RN
-
F
D, RD
BW
-
B, RB
X
S
G
E, RE
Novacap
Syfer
-
-
Q, U
C
H
-
G
P
R
X
B
N
-
X
Syfer
Voltronics
F
H
Q
-
-
-
-
-
-
X
-
-
-
-
Voltronics
-55ºC to
+125ºC
-55ºC to
+125ºC
-55ºC to
+125ºC
-55ºC to +125ºC
-55ºC to
+150ºC
-55ºC to
+160ºC
-55ºC to
+200ºC
-55ºC to
+85ºC
-55ºC to
+150ºC
-55ºC to
+160ºC
-55ºC to
+200ºC
0 ±15 ppm/ºC
0 ±20 ppm/ºC
0 ±30 ppm/ºC
0 ±30 ppm/ºC
No DC voltage
applied
Rated DC
voltage applied
≤0.0005
@1MHz
≤0.0005 @1MHz
Time constant
(Ri x Cr)
0 ±30 ppm/ºC 0 ±30 ppm/ºC 0 ±30 ppm/ºC
-
@25ºC = 106 MΩ min
@125ºC = 105 MΩ min
>50pF
很抱歉,暂时无法提供与“1206J0630220JAT”相匹配的价格&库存,您可以联系我们找货
免费人工找货