1808JA250101JKTS2X

Multilayer Ceramic Chip Capacitor Part Number: 1808JA250101JKTS2X Approval Specifications: IEC/EN60384-14:2013+A1 Certification: TÜV R60153659 / ID1111233476 Description: 1808 250Vac (X2) 50/60Hz / 1000Vdc 100pF ±5% C0G/NP0 (1B) to AEC-Q200 UL60384-14, CAN/CSA E60384-14:14 UL/cUL E228790-20200917 Classification: IEC/EN 60384-14:2013+A1 Class X2 UL/cUL FOWX2, FOWX8 Component Marking and Certification Bodies: Material Group I : CTI >= 600 Mechanical Specification Size Code 1808 Length (L1) in mm (") 4.5 ± 0.35 (0.180 ± 0.014) Width (W) in mm (") 2.0 ± 0.30 (0.08 ± 0.012) Thickness (T) in mm (") 1.5 Max (0.06 Max) Minimum Termination Band (L2,L3) in mm (") 0.50 (0.020) Maximum Termination Band (L2,L3) in mm (") 0.80 (0.030) Minimum Band Gap (L4) in mm (") 3.0 (0.118) Termination Material Nickel Barrier, Sn Plated Solder (RoHS compliant) Solderability IEC-60068-2-58 Packaging 7" Reel Horizontal Orientation, 1500 per reel General Electrical Specification Rated Voltage Class X2 (250Vac), 50/60Hz, 2.5kV impulse Humidity Grade Grade III (IEC/EN60384-14:2013 Annex 1) Maximum DC Working Voltage 1000Vdc certified / (2500Vdc outside scope of any specification) Nominal Capacitance Value 100pF Capacitance Tolerance ±5% Tangent of Loss Angle (Tan δ) ≤0.0015 Capacitance and Tan δ Test Conditions 1.0Vrms @ 1MHz Voltage Proof (50mA max charging current for DC tests) 100% test: 3000Vdc 1s min / 5s max AQL test: 3225Vdc / 1500Vac 60s min / 2.5kV 1.2x50µs impulse Min Insulation Resistance (IR) 100.00GOhm @ 100Vdc Dielectric Classification C0G/NP0 (1B) to AEC-Q200 -55°C / +125°C Rated Temperature Range Maximum Capacitance Change over Temperature Range No DC Voltage Climatic Category (IEC) 55/125/56 Ageing Characteristic Zero Knowles Precision Devices - Sales Europe: KPD-Europe-sales@knowles.com Asia: KPD-Asia-sales@knowles.com USA: KPD-NA-sales@knowles.com www.knowlescapacitors.com 0±30ppm/°C Rated DC Voltage - This datasheet is for a standard item and is confirmed valid on the date generated, the latest published data for this part may differ and is available at http://www.knowlescapacitors.com or by contacting us. © The information contained on this drawing is confidential and may not be copied in whole or part in any form or disclosed to a third party without the consent of Knowles and any customer mentioned within this specification. Data is correct to the best of our knowledge, errors and omissions excepted. Date: Thursday, September 02, 2021 20210902 175635715UTC Multilayer Ceramic Chip Capacitor 1808 250Vac (X2) 50/60Hz / 1000Vdc 100pF ±5% C0G/NP0 (1B) to AEC-Q200 Description: Part Number: 1808JA250101JKTS2X Environmental RoHS Compliant to 2011/65/EC as amended by 2015/863/EU Compliant REACH Compliant 211 compliant California Proposition 65 No exposure risk Board Layout IPC-7351 pad design Knowles' conventional 2-terminal chip capacitors can generally be mounted using pad designs in accordance with international specification IPC-7351, Generic Requirements for Surface Mount Design and Land Pattern Standards, but there are some other factors that have been shown to reduce mechanical stress, such as reducing the pad width to less than the chip width. In addition, the position of the chip on the board should be considered. 1808 C Y X 4.10mm 1.50mm 2.30mm 0.161" 0.059" 0.091" Some high voltage parts may require modifications to the board layout and/or the addition of a conformal coating to prevent flashover. Refer to application note AN0043 for further information. Packaging Tape packaging information for tape-and-reel parts: Tape and reel packing of surface mounting chip capacitors for automatic placement are in accordance with IEC60286-3. Soldering Reflow solder in accordance with IPC-A-610. Recommended reflow profile as laid down in IPC/JEDEC J-STD-020. Wave soldering is also possible, but care must be taken for case sizes 1210 and larger and component thickness >1.0mm. Trials are encouraged. Hand soldering is not recommended and can lead to component damage through thermal shock. Application notes with mounting and handling guidance are available on request. Compex DLI Knowles Precision Devices - Sales Europe: KPD-Europe-sales@knowles.com Asia: KPD-Asia-sales@knowles.com USA: KPD-NA-sales@knowles.com www.knowlescapacitors.com Johanson MFG Novacap Syfer Voltronics This datasheet is for a standard item and is confirmed valid on the date generated, the latest published data for this part may differ and is available at http://www.knowlescapacitors.com or by contacting us. © The information contained on this drawing is confidential and may not be copied in whole or part in any form or disclosed to a third party without the consent of Knowles and any customer mentioned within this specification. Data is correct to the best of our knowledge, errors and omissions excepted. Date: Thursday, September 02, 2021 20210902 175635715UTC