222523K00391JQTAF9LM

Non-Magnetic Capacitors - High Q, C0G/NP0, X7R - 16V to 7.2kV MLC capacitors with silver/palladium (Ag/Pd) terminations have often been used in medical applications where non-magnetic components are required, for example in MRI equipment - however, conventional nickel barrier terminations are not suitable due to their magnetic properties. In addition, RoHS requirement to use lead-free solders would cause an increase in soldering temperatures and cause solder leaching problems for the Ag/Pd termination. This has meant alternatives have had to be found and one solution is to use a copper barrier instead of a nickel barrier, with a tin finish on top. This nonmagnetic termination is offered with selected non-magnetic C0G/ NP0, High Q and X7R dielectrics, providing a fully non-magnetic component (µr = 1.0000). To meet high temperature 260ºC soldering reflow profiles as detailed in J-STD-020, C0G/NP0 dielectrics are supplied with FlexiCap™ or sintered termination whilst X7R dielectrics are supplied only with the FlexiCap™ termination. Available in chip or ribbon leaded format for certain case sizes (consult sales office). High Q, C0G/NP0 - minimum/maximum capacitance values 1812 2220 0.3pF 1.0pF 1.0pF 2.0pF 1.5nF - - - - 330pF 1.0nF 2.2nF 2.2nF 4.7nF 10nF 6.8nF Min Cap 50V 63V 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF 22pF 100pF 220pF 470pF 15pF 68pF 150pF 300V 500V 630V 1000V 2000V 3000V 0505 1808 0402 100V 150V 200V250V 0603 1111 1210 Chip Size 0805 1206 10pF 47pF 100pF 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8pF 33pF 56pF 150pF 470pF 1.0nF 1.0nF 2.2nF 4.7nF - 27pF 47pF 120pF 390pF 820pF 820pF 1.8nF 3.9nF - - - 68pF 270pF 680pF 680pF 1.5nF 3.3nF - Min Capacitance - Tolerance - - 150pF 390pF 390pF 1.0nF 2.2nF - - 82pF 220pF 220pF 680pF 1.5nF - - 18pF 68pF 68pF 150pF 470pF - - - - - 68pF 150pF - ±0.05pF -(4.7pF & 10pF) - - - X7R - minimum/maximum capacitance values Chip Size 0402 0603 0805 1206 1210 1808 1812 Min Cap 16V 25V 50V 63V 47pF 100pF 330pF 680pF 1.5nF 2.2nF 3.3nF 6.8nF 10nF 100nF 330nF 1.0µF 1.5µF 1.5µF 3.3µF 5.6µF 100V 200V250V 500V 630V 1000V 1200V 1500V 2000V 2220 6.8nF 68nF 220nF 820nF 1.2µF 1.2µF 2.2µF 4.7µF 4.7nF 47nF 150nF 470nF 1.0µF 680nF 1.5µF 3.3µF 1.5nF 10nF 47nF 150nF 470nF 330nF 1.0µF 1.5µF 680pF 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0µF - 1.5nF 8.2nF 33nF 100nF 100nF 270nF 560nF - - 4.7nF 10nF 27nF 33nF 150nF 330nF - - 3.3nF 4.7nF 15nF 18nF 56nF 120nF - - - 3.3nF 10nF 10nF 33nF 82nF - - 2.7nF 6.8nF 6.8nF 22nF 47nF - - 2.2nF 4.7nF 4.7nF 10nF 27nF Min Capacitance Tolerance - ±5% - High Q, C0G/NP0 High Power RF capacitors - minimum/maximum capacitance values A range of ultra-low loss High Q ceramic capacitors with C0G/NP0 characteristics suitable for high power applications where minimal power loss and very low self heating is demanded. Common applications include MRI body coils and wireless charging systems operating in the kHz and MHz frequencies. Available in chip or ribbon leaded format. Chip size Case size 25 - 2225 Case size 40 - 4040 Min. Max. Min. Max. 200V 6.2nF 10nF 16nF 27nF 500V 5.1nF 5.6nF 13nF 15nF 630V 3.9nF 4.7nF 12nF 12nF 1kV 1.2nF 3.3nF 5.6nF 10nF 2kV 510pF 1.0nF 1.6nF 5.1nF 3kV 1pF 47*/470pF 910pF 1.5nF 620pF 820pF 390pF 560pF 4kV 5kV 6kV 7.0/7.2kV Can be ordered as Syfer or Voltronics parts. *47pF max. for dual rated @2.5kVac 30MHz **56pF max. for dual rated @5kVac 30MHz. 160pF 330pF 1pF 56**/150pF www.knowlescapacitors.com Non-Magnetic Capacitors - High Q, C0G/NP0, X7R - 16V to 7.2kV Ribbon Leaded Silver plated copper ribbon attached with HMP solder - (MP greater than 260ºC) 4040 12.0 max (0.473 max) T 11.5 max 8.9±0.5 9.3 max (0.366 max) (0.35±0.02) 7.5 max (0.30 max) L1 5.5±0.5 (0.22±0.02) 2225 35 typ 50 typ (1.378 typ) W +0.10 0.25 -0.05 (0.01 +0.004 -0.002 ) ( +0.10 0.25 -0.05 +0.004 0.01 -0.002 5.0 max ) 4.4±0.5 (0.173 max) L2 (0.197 max) (1.97 typ) Ordering information - Syfer Non-Magnetic capacitors 1206 4040 2225 2 2 B Chip size Termination or Coating 0402* 0603 0505 0805 1206 1111 1210 1808 1812 2220 2225† 4040† 2 = Sintered silver with copper barrier* 3 = FlexiCap™ with copper barrier. 4 = Sintered silver with copper barrier* 5 = FlexiCap™ base with copper barrier. (Ribbon Leaded) Ribbon Leaded B = Uncoated V = Coated with modified silicone laquer 500 7K0 3K0 0223 0470 6P80 J G G Q Q Q T B B R AF9 W221 Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packing Lead Options Suffix code