ET5

Half Turn Trimmers Air Trimmers Glass Trimmers PTFE Trimmers Sapphire Trimmers Quartz Trimmers Non-Magnetic Trimmers Non-Magnetic Chip Capacitors Non-Magnetic Coils Non-Magnetic Diodes Non-Magnetic Hardware Trimmer Capacitors & Non-Magnetic Components www.voltronicscorp.com Introduction to Voltronics Corporation Voltronics has been supplying high performance multi-turn trimmers since 1963. Our range of trimmers are suitable for applications that require high precision, mechanically stable with a high tolerance to vibration and shock. Our success is based on a unique sealed, non-rotating piston design that has become one of the designers preferred choices for demanding applications. As well as our extensive range of standard products we are able to design and manufacture customized products for our specialty customers. In addition we are able to offer a range of half turn trimmers suitable for less stringent applications, but still providing good stability and voltage handling capabilities. For more than 30 years Voltronics has been partnered with leading MRI manufacturers, supporting them with the highest quality non-magnetic components. This has grown from just supplying trimmer capacitors to now include a broad offering of non-magnetic components focussed on MRI applications. www.voltronicscorp.com Contents Half Turn Ceramic SM Chip Trimmers Product Guide ..................................................................................................................2 JZ & JZ_HV Series ............................................................................................................3 JR & JR_HV Series............................................................................................................4 JV Series .........................................................................................................................5 JQ & JN Series .................................................................................................................6 Q Data Charts & Engineering Kits ......................................................................................7 Precision Air/PTFE/Sapphire Trimmers Product Guide ..................................................................................................................8 A & E Series Standard Air Trimmers ...................................................................................9 K & KE Series Air Trimmers .............................................................................................10 A1 & A3 Series Low Cost PTFE Trimmers..........................................................................11 A2 & A4 Series Low Cost Miniature Trimmers ..................................................................12 A_HV & E_HV Series High Voltage PTFE Trimmers ............................................................13 K_HV & KE_HV Series High Voltage PTFE Trimmers ..........................................................14 A Series Very High Voltage PTFE Trimmers .......................................................................15 NT Series Ultra High Voltage PTFE Trimmers ....................................................................15 Air/PTFE Trimmers Lead Styles ........................................................................................16 P series High Q Sealed Sapphire Trimmers .......................................................................17 Glass and Quartz Trimmers *HQHUDO6SHFL¿FDWLRQV.....................................................................................................18 S Series - Smallest Sealed Glass Trimmers........................................................................19 H Series - Extended Range Glass Trimmers ......................................................................20 TF Series - Vertical P.C. Mount Glass Trimmers .................................................................21 TM & QM Series - Panel Mount Glass & Quartz Trimmers............................................. 22-23 TP & QP Series - Horizontal P.C. Mount Glass & Quartz Trimmers ................................. 24-25 Differential Glass Trimmers .............................................................................................26 Split Stator Glass Trimmers .............................................................................................26 Engineering Prototype Kits - Air/PTFE/Sapphire & Glass Trimmer Capacitors .......................27 Precision Microwave Tuners DRO - Microwave Tuners for Dielectric Resonator..............................................................28 Precision Microwave Cavity Tuners...................................................................................29 Non-Magnetic Components & Hardware Trimmers - Product Guide ...............................................................................................30 PTFE Trimmers - NT Series Ultra High Voltage ..................................................................31 Sapphire Trimmer - V9000 Sub-miniature.........................................................................32 Multilayer Capacitors - Product Guide...............................................................................33 0XOWLOD\HU&DSDFLWRUV*HQHUDO6SHFL¿FDWLRQV ...................................................................34 High Q Multilayer Capacitors - 5 Series ............................................................................35 High Q Multilayer Capacitors - 11 Series...........................................................................36 High Q Multilayer Capacitors - 25 Series...........................................................................37 High Q Multilayer Capacitors - 38 Series...........................................................................38 Coils - Product Guide ......................................................................................................39 Diodes - RF Actuated Diode Switch ..................................................................................40 Hardware - Screws/Nuts/Washers....................................................................................41 www.voltronicscorp.com | Phone: +1.410.749.2424 | 1 Product Guide - Half Turn Ceramic Chip Trimmers Product Line JZ & JZ_HV* Actual Size Length x Width x Height Part Number Cap. Range Min. - Max. pF 0.177 x 0.126 x 0.059 in 4.5 x 3.2 x 1.5 mm JZ030 JZ060 JZ080 JZ100 JZ150 JZ200 JZ300 JZ400 1.5 - 3.0 2.0 - 6.0 3.0 - 8.0 2.0 - 10.0 3.0 - 15.0 4.5 - 20.0 5.5 - 30.0 8.0 - 40.0 Temperature &RHI¿FLHQW SRF GHz 0±200 0±300 -750±500 0±300 0±300 0±500 -1500±1000 -1500±1000 2.1 1.5 1.25 1.16 0.92 0.81 0.7 0.6 Mounting Page Surface 3 1RWH:HQRZRIIHUWKHVHULHVLQD+,*+92/7$*(9(56,217KH-=B+9VHULHVVSHFL¿FDWLRQVDUHLGHQWLFDOWRWKHVSHFL¿FDWLRQVOLVWHG above with this important exception: DC Working Voltage 350DC, Withstanding Voltage 750. 0.138 x 0.122 x 0.045 in 3.5 x 3.1 x 1.15 mm 1.5 - 3.0 2.0 - 6.0 3.0 - 8.0 2.0 - 10.0 3.0 - 15.0 4.5 - 20.0 5.5 - 30.0 8.0 - 40.0 0±200 0±300 -750±500 0±300 0±300 0±500 -1500±1000 -1500±1000 JV 0.126 x 0.098 x 0.049 in 3.2 x 2.5 x 1.25 mm JV010 JV025 JV030 JV060 JV100 JV200 JV250 JV450 0.5 - 1.0 0.65 - 2.5 1.5 - 3.0 2.5 - 6.0 3.0 - 10.0 4.5 - 20.0 5.5 - 25.0 8.0 - 45.0 0±300 0±300 0±300 0±300 0±300 –750±500 –750±500 –1000±500 2.6 1.9 1.4 1.0 0.9 0.6 JQ 0.106 x 0.087 x 0.04 in 2.7 x 2.2 x 1.0 mm JQ060 JQ100 JQ200 3.0 - 6.0 3.5 - 10.0 7.0 - 20.0 0±300 0±300 –750±500 JN 0.067 x 0.059 x 0.035 in 1.7 x 1.5 x 0.9 mm JN010 JN015 JN040 JN080 0.55 - 1.0 0.7 - 1.5 1.5 - 4.0 3.0 - 8.0 0±300 0±300 0±300 –750±500 JR & JR_HV* Engineering Kits and Q Data Charts 2 2.9 JR030 JR060 JR080 JR100 JR150 JR200 JR300 JR400 | Phone: +1.410.749.2424 | www.voltronicscorp.com 2.05 1.8 1.6 1.3 1.15 0.92 0.84 Surface 4 Surface 5 1.6 1.2 0.9 Surface 6 6.0 4.8 2.7 1.8 Surface 6 4.6 2.9 7 JZ & JZ_HV - Ceramic Chip Trimmer Capacitors Dimensions -'UDZLQJWROHUDQFHVZKHUHQRWVSHFL¿HG“´PP .177 4.5 .126 3.2 DIA .059 1.5 .126 3.2 .039 1.0 .031 .8 .126 3.2 .033 .85 .031 .8 SETTING INDICATOR SHOWN AT MAX C. .087 2.2 DIA ROTOR TERMINAL DIA .018 .45 *HQHUDO6SHFL¿FDWLRQV Part Number - JZ series JZ030 JZ060 JZ080 JZ100 JZ150 JZ200 JZ300 JZ400 JZ500 DC Working Voltage 125 125 125 125 125 125 125 125 125 DC Withstanding Voltage 250 250 250 250 250 250 250 250 250 Part Number - JZ_HV JZ030HV JZ060HV JZ080HV JZ100HV JZ150HV JZ200HV JZ300HV JZ400HV DC Working Voltage 350 350 350 350 350 350 350 350 DC Withstanding Voltage 700 700 700 700 700 700 700 700 Capacitance (pF) Minimum Maximum 1.5 3.0 Marking Color 2.0 6.0 +50% – 0% Black 7HPSHUDWXUH&RHI¿FLHQWSSPž& 3.0 8.0 Blue +50% – 0% Violet 2.0 10.0 +100% – 0% 3.0 15.0 White +100% – 0% 4.5 20.0 Pink +100% – 0% 5.5 30.0 +100% – 0% 8.0 40.0 +100% – 0% 8.0 50.0 +100% – 0% Red Orange Yellow Green -1500 ± 1000 -1500 ± 1000 0 ± 200 0 ± 300 -750 ± 500 0 ± 300 0 ± 300 0 ± 500 -1500 ± 1000 500 1000 1500 1500 1500 1500 1500 1500 1500 2.1 GHz 1.5 GHz 1.25 GHz 1.16 GHz 0.92 GHz 0.81 GHz 0.70 GHz 0.60 GHz 0.53 GHz 4PLQDW0K] Self Resonant Frequency at Maximum Rated Capacitance +50% – 0% 10 megohms Insulation Resistance 4 Operating Temperature -40°C to +85°C Torque 0.14 to 1.0 in-oz Packaging All parts furnished on 12mm tape and reel. 1,000 pcs. per reel. Solder Pad Layout 5HFRPPHQGHG5HÀRZ6ROGHU 7HPSHUDWXUH3UR¿OH Recommended thickness of solder paste 0.15mm .187 4.75 .120 3.05 Pre-Heating (In air) Temperature °C SOLDER RESIST .055 1.4 Soldering Gradual Cooling (In air) 260°C 250 200 150 100 50 One Minute Minimum SOLDERING PAD 20 Seconds Maximum Recommended Tuning Tools Ceramic Tipped: TT-400 .018 0.45 .110 2.79 .88 22.35 4.50 114.3 VOLTRONICS .115 2.92 .88 22.35 Ceramic Tipped: TT-900 .281 7.14 .008 0.2 .032 0.81 www.voltronicscorp.com | Phone: +1.410.749.2424 | 3 JR & JR_HV - Ceramic Chip Trimmer Capacitors Dimensions - 'UDZLQJWROHUDQFHVZKHUHQRWVSHFL¿HG“´PP .047 1.2 .059 1.5 .138 3.5 .045 .016 0.4 .016 0.4 .063 1.6 SETTING INDICATOR SHOWN AT MAX C. .087 .122 3.1 2.2 DIA .122 3.1 DIA .063 1.6 .028 0.7 .063 1.6 .059 1.5 1.15 ROTOR TERMINAL .028 0.7 .018 .45 *HQHUDO6SHFL¿FDWLRQV Part Number - JR series JR030 JR060 JR080 JR100 JR150 JR200 JR300 JR400 DC Working Voltage 125 125 125 125 125 125 125 125 DC Withstanding Voltage 250 250 250 250 250 250 250 250 JR030HV JR060HV JR080HV JR100HV JR150HV JR200HV JR300HV JR400HV DC Working Voltage 350 350 350 350 350 350 350 350 DC Withstanding Voltage 700 700 700 700 700 700 700 700 Part Number - JR_HV Capacitance (pF) 1.5 3.0 Minimum Maximum Marking Color 7HPSHUDWXUH&RHI¿FLHQWSSPž& 2.0 6.0 +50% – 0% 3.0 8.0 +50% – 0% 2.0 10.0 +100% – 0% 3.0 15.0 +100% – 0% 4.5 20.0 5.5 30.0 +100% – 0% +100% – 0% Orange Blue Violet None Pink Red 0 ± 300 -750 ± 500 0 ± 300 0 ± 500 0 ± 500 500 1000 1500 1500 1500 1500 1500 1500 2.9 GHz 2.05 GHz 1.8 GHz 1.6 GHz 1.3 GHz 1.15 GHz 0.92 GHz 0.84GHz -40°C to +85°C Torque 0.6 in-oz max. Packaging All parts furnished on 12mm tape and reel. 1,000 pcs. per reel. 5HFRPPHQGHG5HÀRZ6ROGHU 7HPSHUDWXUH3UR¿OH Solder Pad Layout Recommended thickness of solder paste 0.15mm .173 4.4 0.94 2.4 Pre-Heating (In air) Temperature °C SOLDER RESIST .071 1.8 Soldering Gradual Cooling (In air) 260°C 250 200 150 100 50 One Minute Minimum SOLDERING PAD 20 Seconds Maximum Recommended Tuning Tools Ceramic Tipped: TT-400 .110 2.79 .88 22.35 4.50 114.3 .88 22.35 VOLTRONICS .115 2.92 | Phone: +1.410.749.2424 | www.voltronicscorp.com Ceramic Tipped: TT-900 .281 7.14 .008 0.2 .032 0.81 Yellow -1500 ± 1000 -1500 ± 1000 104 megohms Operating Temperature .018 0.45 +100% – 0% Black Insulation Resistance 4 8.0 40.0 0 ± 200 4PLQDW0K] Self Resonant Frequency at Maximum Rated Capacitance +50% – 0% JV - Ceramic Chip Trimmer Capacitors Dimensions - 'UDZLQJWROHUDQFHVZKHUHQRWVSHFL¿HG“´PP .02 0.5 .055 1.4 .098 2.5 .049 1.25 max. .037 0.95 .126 3.2 .018 0.45 Setting indication shown at max. Cap. .04 Rotor Terminal 1.0 *HQHUDO6SHFL¿FDWLRQV Part Number - JV Series JV010 JV025 JV030 JV060 JV100 JV200 JV250 JV450 DC Working Voltage 25 25 25 25 25 25 25 25 DC Withstanding Voltage 55 55 55 55 55 55 55 55 0.5 1.0 0.65 2.5 1.5 3.0 2.5 6.0 3.0 10.0 4.5 20.0 5.5 25.0 8.0 45.0 Capacitance Minimum Maximum (pF) +100% – 0% Marking Color 7HPSHUDWXUH&RHI¿FLHQWSSPž& 4PLQDW0K] Self Resonant Frequency at Maximum Rated Capacitance None None None None None None None None 0 ± 300 0 ± 300 0 ± 300 0 ± 300 0 ± 300 -750 ± 500 -750 ± 500 -1000 ± 500 500 500 500 500 500 500 300 300 4.6 GHz 2.9 GHz 2.6 GHz 1.9 GHz 1.4 GHz 1.0 GHz 0.9 GHz 0.6 GHz Insulation Resistance 104 megohms Operating Temperature -25°C to +85°C Torque 0.6 in-oz max. Packaging - 8mm tape and reel 2,000 pcs. per reel. 5HFRPPHQGHG5HÀRZ6ROGHU 7HPSHUDWXUH3UR¿OH Solder Pad Layout Recommended thickness of solder paste 0.15mm .157 4.0 Pre-Heating (In air) Temperature °C .094 2.4 .047 1.2 Soldering Gradual Cooling (In air) 245°C 250 200 150 100 50 One Minute Minimum Soldering Pad 20 Seconds Maximum Recommended Tuning Tools Ceramic Tipped: TT-930 4.25 108 Bit shape: Minus .031 x .014 0.8 x 0.35 www.voltronicscorp.com | Phone: +1.410.749.2424 | 5 JQ & JN SERIES - Ceramic Chip Trimmer Capacitors Dimensions - 'UDZLQJWROHUDQFHVZKHUHQRWVSHFL¿HG“´PP JQ Series JN Series .008/.2 WIDTH .006/.15 DEPTH Rotor Terminal JQ Series .024 .008 .6 WIDTH .20 DEPTH Rotor Terminal JN Series Setting Indicator shown at max. C. Setting Indicator shown at max. C. *HQHUDO6SHFL¿FDWLRQV Part Number JQ060 JQ100 JQ200 JN010 JN015 JN040 JN080 25 25 25 25 25 25 25 +100% – 0% 55 55 55 55 55 55 55 +100% – 0% 3.0 6.0 3.5 10.0 7.0 20.0 0.55 1.0 0.7 1.5 1.5 4.0 3.0 8.0 DC Working Voltage DC Withstanding Voltage Capacitance Minimum Maximum (pF) Marking Color 7HPSHUDWXUH&RHI¿FLHQWSSPž& None None None None None None None 0 ± 300 0 ± 300 -750 ± 500 0 ± 300 0 ± 300 0 ± 500 -750 ± 500 500 500 500 500 500 300 300 1.6 GHz 1.2 GHz 0.9 GHz 6.0 GHz 4.8 GHz 2.7 GHz 1.8 GHz 4PLQDW0K] Self Resonant Frequency at Maximum Rated Capacitance Insulation Resistance Operating Temperature Torque Packaging - 8mm tape and reel 104 megohms 104 megohms -25°C to +85°C -25°C to +85°C .07 to 7.0 in-oz .014 to .14 in-oz 3,000 pcs. per reel. 3,000 pcs. per reel. 5HFRPPHQGHG5HÀRZ6ROGHU 7HPSHUDWXUH3UR¿OH Solder Pad Layout Recommended thickness of solder paste 0.15mm JN Series .13 3.2 .08 2.1 Pre-Heating (In air) .09 2.2 Temperature °C JQ Series .05 1.2 .02 0.5 .04 1.0 200 150 100 50 One Minute Minimum 20 Seconds Maximum Recommended Tuning Tools JQ Series Ceramic Tipped: TT-910 JN Series Ceramic Tipped: TT-920 3.15 3.18 .06 1.5 .06 1.5 80 Bit shape: „ Square .02 x .02 0.54 x 0.54 6 | Phone: +1.410.749.2424 | www.voltronicscorp.com Gradual Cooling (In air) 245°C 250 Soldering Pad Soldering Pad Soldering 80 Bit shape: Minus .01 x .005 0.3 x 0.13 Q Data Charts & Engineering Kits Quality Factor (Q) of “JZ” Series Capacitors Quality Factor (Q) of “JR” Series Capacitors Quality Factor (Q) of “JV” Series Capacitors )UHTXHQF\0+] )UHTXHQF\0+] Quality Factor (Q) of “JQ” Series Capacitors )UHTXHQF\0+] Quality Factor (Q) of “JN” Series Capacitors Engineering Kits Kit # JZ Kit* Quantity Description 4 JZ-HV Kit* )UHTXHQF\0+] )UHTXHQF\0+] JR Kit* 4 JR-HV Kit* 4 JV Kit** 5 JQ Kit** 5 JN Kit** 5 Each Capacitance Range J-Series engineering kits are a great way to become familiar with our products. Each kit contains 4 or 5 units of every value. Please be sure to inquire about tuning tools when ordering. * Tuning tools are included with this kit. **Tuning tools are not included with this kit. Washing Instructions: The J-Series trimmer capacitors can withstand cleaning cycles up to 10 PSI and have been used by customers for more than a decade in many diverse environmental conditions. Without knowing your particular washing or cleaning environment, we recommend these basic guidelines:  :DWHUZDVKRULVRSURS\ODOFRKROFOHDQLQJDJHQWVDUHDFFHSWDEOHSURYLGLQJWKDWEDWKVDUHFOHDQDQGXQFRQWDPLQDWHG For maximum effectiveness, the cleaning process should occur immediately after soldering.  (LWKHUEUXVKRUVSUD\PHWKRGVDUHDFFHSWDEOH  'U\LQJRXWFRPSRQHQWVZLWKIRUFHGKRWDLULVKLJKO\UHFRPPHQGHG  $OVRZHGRUHFRPPHQGWXUQLQJWKHWXQLQJVFUHZRUFRPSOHWHUHYROXWLRQVSULRUWRDUULYLQJDWWKH¿QDO³VHW´ * If a water wash process is used and water does get inside, we recommend that the parts be heated above 100C for a minimum of 15 minutes, so that the water evaporates. After this, the rotor should be turned 1-2 times to redistribute the internal grease. www.voltronicscorp.com | Phone: +1.410.749.2424 | 7 Product Guide - Air/PTFE/Sapphire Trimmer Capacitors Product Line Actual Size Description Series Typical Maximum Surface Self-Resonant Capacitance Page Mount Frequency (pF) (Max) A 14 1.5 GHz yes 9 E 10 1.3 GHz yes 9 K K & KE 10 1.3 GHz yes 10 A1_4/8 A1 12 2.3 GHz yes 11 A1 12 2.3 GHz yes 11 A3 10 2.3 GHz yes 11 A2 1.2 5.0 GHz yes 12 A4_3 A4 5 4.3 GHz yes 12 A4_5 A4 5 4.3 GHz yes 12 A_HV 30 1.5 GHz yes 13 E_HV 9 1.3 GHz yes 13 K & KE_HV 9 1.3 GHz yes 14 A_HV 55 .90 GHz yes 15 NT 85 500 MHz no 15 P3 2.5 7.5 GHz yes 17 P5 4.5 4.0 GHz yes 17 P8 8 1.5 GHz yes 17 V9000 12 yes 32 A E Air Dielectric A1_12 A3 A2 Low Cost PTFE Dielectric A_HV E_HV K_HV A_HV High Voltage PTFE Dielectric Ext. Range NT Min. PTFE Dielectric up to 15 kV NT Max. P3 P5 P8 V9000 Sapphire Dielectric N.B. Most of the above trimmer capacitors can be ordered as non-magnetic - see non-magnetic section. 8 | Phone: +1.410.749.2424 | www.voltronicscorp.com A & E - Standard AIR Trimmer Capacitors The Only Internally-Sealed Air Trimmer Voltronics’ concentric ring air trimmer capacitors are designed for use at frequencies up to 1.5 GHz. They are ideal for applications such as mobile radios, aerospace FRPPXQLFDWLRQFU\VWDORVFLOODWRUVDQG¿OWHUVUDGDUFDEOH79DQG innumberable other commercial and military programs. The unique internal O-ring seal make wave soldering and vapor degreasing possible without the need to attach a separate cap. .50” Available in two styles: ³$´6HULHV6ROGHUVHDOHGDQGTXDOL¿HGWR0,/& ³(´6HULHV(SR[\VHDOHGIRUHFRQRPLFDOFRPPHUFLDODSSOLFDWLRQV .30” ACTUAL SIZE Other features include: A1 zTen full linear turns zInternal stops z Extreme stability under shock & vibration zScrew head does not move in and out zExtended shaft option of metal or plastic zLong life with no dynamic tuning noise *HQHUDO6SHFL¿FDWLRQV Capacitance Range SERIES LEAD STYLE J 8 HV CAPACITANCE OPTIONS Refer to page 16 Note: All parts shown here can be ordered as non-magnetic: $GG³10´WR3DUW1XPEHULH10$3 A_5 E_5 A_10 E_10HV A_14 E_14 1-5 pF / 1.0-10 pF 1-10 pF / 1.0-10 pF 1-14 pF / 1.0-14 pF 4PLQDW0+]#0D[& 5,000 5,000 3,000 DC Working Voltage 250 250 125 DC Withstanding Voltage 500 500 250 “SSPÛ&“SSPÛ& “SSPÛ&“SSPÛ& “SSPÛ&“SSPÛ& 7HPSHUDWXUH&RHI¿FHQW ,QVXODWLRQ5HVLVWDQFH#Û& 106 megohms 106 megohms 106 megohms Seal 40 pounds/in2 40 pounds/in2 40 pounds/in2 ±Û&WRÛ& Operating Temperature ±Û&WRÛ& ±Û&WRÛ& Rotational Life 10000 Turns 10000 Turns 10000 Turns Tuning Torque .05 to 5.0 in-oz .05 to 5.0 in-oz .05 to 5.0 in-oz 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. 50g at 10-2000 Hz 50g at 10-2000 Hz 50g at 10-2000 Hz Shock Vibration * Self-resonant frequency and Q are assured with no terminals on parts. NON-ROTATING MOVEABLE ELECTRODE PERMANENT O-RING SEAL CONTACT ARMS FOR SHORT RF CURRENT PATH PTFE SPACER FOR POSITIVE GUIDANCE www.voltronicscorp.com | Phone: +1.410.749.2424 | 9 K & KE - Air Trimmer Capacitors Part Number Capacitance (pF) .´6HULHV ³.(6HULHV From Below To Above KP8 KEP8 0.6 8.0 KP10 KEP10 0.6 10.0 KF8 KEF8 0.6 8.0 KF10 KEF10 0.6 10.0 KT8 KET8 0.6 8.0 KT10 KET10 0.6 10.0 KJ8 KEJ8 0.6 8.0 KJ10 KEJ10 0.6 10.0 KT8L KET8L 0.6 8.0 KT10L KET10L 0.6 10.0 KG8 KEG8 0.6 8.0 KG10 KEG10 0.6 10.0 KM8 KEM8 0.6 8.0 KM10 KEM10 0.6 10.0 FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 1RWH$OOEXVKLQJWKUHDGVDUH´ IN MM IN 0.015 0.38 0.067 MM 1.70 0.160 4.06 0.260 6.60 0.030 0.76 0.070 1.78 0.180 4.57 0.270 6.86 0.036 0.91 0.080 2.03 0.190 4.83 0.280 7.11 0.040 1.02 0.093 2.36 0.200 5.08 0.300 7.62 0.045 1.14 0.110 2.79 0.230 5.84 0.590 14.99 0.060 1.52 0.140 3.56 0.240 6.10 0.065 1.65 0.150 3.81 0.250 6.35 Recommended Tuning Tool: TT-100 or TT-500 10 | Phone: +1.410.749.2424 | www.voltronicscorp.com IN MM IN MM A1 & A3 - Low Cost PTFE Trimmer Capacitors The Voltronics A1 & A3 Series of high reliability solid dielectric trimmer capacitors is an ideal economical replacement for conventional miniature air and sapphire dielectric trimmers and assures no intermittent noiseless performance. High reliability solid dielectric, positive tuning stops and up to 13 full turns of linear tuning make the A1 Series an outstanding performer: 40 psi sealed, high voltage and non-magnetic versions are readily available. 0.4” A1 J 8 HV .155” A TUA SI E SERIES LEAD STYLE CAPACITANCE OPTIONS Refer to page 16 *HQHUDO6SHFL¿FDWLRQV A1_4 A1_8 A1_12 Capacitance Range 0.45-4pF 0.5-8pF 0.6-11pF DC Working Voltage 250 125 125 500 2.3 GHz at 4pF 7 250 1.7 GHz at 8pF 7 250 1.2 GHz at 11pF 13 4000 0±50 SSPÛ& 3000 0±100 SSPÛ& 106 megohms 2000 0±150 SSPÛ& DC Withstanding Voltage Self-Resonant Frequency* Number of Turns 4PLQDW0+]#0D[& 7HPSHUDWXUH&RHI¿FLHQW ,QVXODWLRQ5HVLVWDQFH#Û& Operating Temperature Tuning Torque Shock Vibration Û&WRÛ& 0.3 to 1.0 in-oz 1,500g, 0.5 millisecs. 50g at 10-2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. Options 7KH³+9´2SWLRQKLJKYROWDJHDSSOLFDWLRQV $GG³+9´WRWKHSDUWQXPEHULH$7+9 6SHFL¿FDWLRQVDUHDVIROORZV Capacitance 4pF 8pF 11pF DC Volts Working DC Volts Withstanding 1,000 500 500 2,000 1,000 1,000 Non-Magnetic Option: Most parts shown can be ordered as non-magnetic. $GG³10´WRWKHSDUWQXPEHULH10$- Sealed Option: All parts shown can be ordered as 40 psi sealed. $GG³6´WRWKHSDUWQXPEHULH$06 Tape & Reel Options: Consult Factory - M & J style only Recommended Tuning Tool: TT-400 0.5” .30” A1 ACTUAL SIZE SERIES J 8 HV LEAD STYLE CAPACITANCE OPTIONS Refer to page 16 *HQHUDO6SHFL¿FDWLRQV A3_10 Capacitance Range 1.0-10.0pF DC Working Voltage 250 DC Withstanding Voltage 500 Self-Resonant Frequency* 2.3 GHz Number of Turns 4PLQDW0+]#0D[& 7 “SSPÛ& ,QVXODWLRQ5HVLVWDQFH#Û& 106 megohms Tuning Torque Shock Vibration 7KH³+9´2SWLRQKLJKYROWDJHDSSOLFDWLRQV $GG³+9´WRWKHSDUWQXPEHULH$7+9 6SHFL¿FDWLRQVDUHDVIROORZV DC Volts Working DC Volts Withstanding 1,000 2,000 2000 7HPSHUDWXUH&RHI¿FLHQW Operating Temperature Options Û&WRÛ& 0.5 to 2.0 in-oz 1,500g, 0.5 millisecs. 50g at 10-2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. www.voltronicscorp.com | Phone: +1.410.749.2424 | 11 A2 & A4 - Low Cost Miniature PTFE Trimmer Capacitors The Voltronics A2 Series is among the smallest multi-turn piston trimmer capacitors in the industry. Utilizing a high reliablity solid dielectric, positive tuning stops and 3 standard mounting FRQ¿JXUDWLRQVWKLVWULPPHUFDSDFLWRULVDQLGHDOUHSODFHPHQWIRU expensive sapphire dielectric trimmers. Applications include tuning and impedance matching of high frequency, and high power DPSOL¿HUVHVSHFLDOO\ZKHUHVPDOOVL]HDQGKLJKSHUIRUPDQFHDUH critical requirements. A1 .24” SERIES 8 HV LEAD STYLE CAPACITANCE OPTIONS J, M & P Lead Styles .094” U.S. Patent No. 5,229,911 A TUA SI E *HQHUDO6SHFL¿FDWLRQV J Options 7KH³+9´2SWLRQ+LJK9ROWDJH2SWLRQV $GG³+9´WRWKHSDUWQXPEHULH$0+9 A2_1 6SHFL¿FDWRQVDUHDVIROORZV Capacitance Range 0.3–1.2pF DC Working Voltage 250 DC Volts Working DC Volts Withstanding DC Withstanding Voltage 500 1,250 2,500 Self-Resonant Frequency* 5 GHz at 1.2pF Number of Turns Consult Factory - M & J style only 2000 7HPSHUDWXUH&RHI¿FHQW “SSPÛ& QUALITY FACTOR (Q) 106 megohms ,QVXODWLRQ5HVLVWDQFH#Û& Operating Temperature ±Û&WRÛ& 2000 0.1 to 1.0 in-oz 1500 Tuning Torque Shock Tape & Reel Options: 7 4PLQDW0+]#0D[& Q 1,500g, 0.5 millisecs. Vibration A2M1 at 1.2 pF 50g at 10-2000 Hz 1000 800 100 * Self-resonant frequency and Q are assured with no terminals on parts. 200 300 400 600 800 1000 FREQUENCY (MHz) The Voltronics A4 Series unique design using minimal parts VLPSOL¿HVWKHPDQXIDFWXULQJSURFHVVWRHIIHFWRQHRIWKHPRVW economical high performance trimmer capacitors available in the industry. The Voltronics A4 Series also features a high reliability solid dielectric, positive tuning stops and up to 5 full turns of linear tuning in the shortest length of any similar trimmer capacitor. The Voltronics A4 is an ideal choice for tuning and impedance PDWFKLQJKLJKIUHTXHQF\DQGKLJKSRZHUDPSOL¿HUFLUFXLWV A1 .225” SERIES J 8 HV LEAD STYLE CAPACITANCE OPTIONS Refer to page 16 .155” U.S Patent No. 5,229,911 *HQHUDO6SHFL¿FDWLRQV Capacitance DC Working Voltage Options A TUA SI E A4_3 A4_5 0.45–3pF 0.6–5pF 125 125 DC Withstanding Voltage 250 250 Self-Resonant Frequency* 3 GHz at 3pF 1.8 GHz at 5pF Number of Turns 4PLQDW0+]#0D[& 7HPSHUDWXUH&RHI¿FHQW ,QVXODWLRQ5HVLVWDQFH#Û& Operating Temperature Tuning Torque Shock Vibration 4 5 3000 2000 “SSPÛ& “SSPÛ& 106 megohms 7KH³+9´2SWLRQKLJKYROWDJHDSSOLFDWLRQV $GG³+9´WRWKHSDUWQXPEHULH$7+9 6SHFL¿FDWLRQVDUHDVIROORZV Part No. DC Volts Working DC Volts Withstanding A4_3 HV A4_5 HV 500 500 1,000 1,000 Non-Magnetic Option: All parts can be ordered as non-magnetic. $GG³10´WRWKHSDUWQXPEHULH10$- Tape & Reel Options: Consult Factory - M style only SD Option for applications requiring high reliability but lower voltage ±Û&WRÛ& Part No. Working Voltage Withstanding Voltage 0.3 to 1.0 in-oz K_1SD A or K_4SD A_25SD A_30* A_40SD A_55SD 250 250 125 250 250 125 500 500 250 500 500 250 1,500g, 0.5 millisecs. 50g at 10-2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. 1RWH$BQRWDYDLODEOHLQKLJKYROWDJHFRQ¿JXUDWLRQ 12 | Phone: +1.410.749.2424 | www.voltronicscorp.com A_HV & E_HV - High Voltage PTFE Trimmer Capacitors The Only Internally-Sealed HV PTFE Trimmers Voltronics’ concentric ring PTFE dielectric trimmer capacitors are designed for use at frequencies up to 1.5 GHz. They are ideal for HIGH VOLTAGE applications. The solid internal PTFE dielectric prevents ionization, a major advantage in space, high altitude and high voltage applications. The unique internal O-ring seal makes wave soldering and vapor degreasing possible without the need to attach a separate cap. Available in two styles: ³$B+9´6HULHV6ROGHUVHDOHGFHUDPLFERG\³(B+9´6HULHV(SR[\ sealed plastic body. 0.4” A1 .155” U.S. Patent No. 5,229,911 SERIES ACTUAL SIZE *HQHUDO6SHFL¿FDWLRQV J 8 HV LEAD STYLE CAPACITANCE OPTIONS Refer to page 16 A_4HV / E_4HV A_10 HV / E_10HV A_15 HV / E_15HV Capacitance Range 1-4pF 1-10pF 1-16pF DC Working 1000 1000 1000 750 DC Withstanding 2000 2000 2000 1500 4PLQDW0+]#0D[& 7HPSHUDWXUH&RHI¿FHQW “SSPÛ& ,QVXODWLRQ5HVLVWDQFH#Û& Seal Operating Temperature A_25 HV / E_25HV 1-23pF 2000 2000 2000 2000 “SSPÛ& “SSPÛ& “SSPÛ& “SSPÛ& 106 megohms 106 megohms 106 megohms 106 megohms 40 pounds/in2 40 pounds/in2 40 pounds/in2 40 pounds/in2 ±Û&WRÛ& ±Û&WRÛ& ±Û&WRÛ& ±Û&WRÛ& Rotational Life 600 Turns 600 Turns 600 Turns 600 Turns Tuning Torque .05 to 5.0 in-oz .05 to 5.0 in-oz .05 to 5.0 in-oz .05 to 5.0 in-oz 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. 50g at 10-2000 Hz 50g at 10-2000 Hz 50g at 10-2000 Hz 50g at 10-2000 Hz Shock Vibration * Self-resonant frequency and Q are assured with no terminals on parts. Extended Range GE Other features include: 1.55” A TUA SI E 0.56” *HQHUDO6SHFL¿FDWLRQV Capacitance Range 4PLQDW0+]#0D[& A_40HV A_55HV 1.5-40pF 1.5-55pF 2000 4PLQDW0+]#0D[& 7HPSHUDWXUH&RHI¿FHQW ,QVXODWLRQ5HVLVWDQFH#Û& Seal Operating Temperature 780 “SSPÛ& “SSPÛ& 106 megohms 106 megohms 40 pounds/in2 40 pounds/in2 ±Û&WRÛ& ±Û&WRÛ& Rotational Life 600 Turns 600 Turns Tuning Torque .05 to 5.0 in-oz 1,500g, 0.5 millisecs. 50g at 10-2000 Hz .05 to 5.0 in-oz 1,500g, 0.5 millisecs. 50g at 10-2000 Hz DC Working Voltage 1000 600 DC Withstanding Voltage 2000 1200 Shock Vibration z Ten or 29 linear turns z Internal stops z Extreme stability under shock & vibration z Screw head does not move in and out z Extended shaft option of metal or plastic z Long life with no dynamic tuning noise * Self-resonant frequency and Q are assured with no terminals on parts. ([WHQGHG0HWDO6KDIW2SWLRQ$GG³(´WR3DUW1XPEHULH AT40SDE Options Non-Magnetic Option: All parts can be ordered as non-magnetic. $GG³10´WRWKHSDUWQXPEHULH10$7+910.3+9 Extended Shaft Options: $GG³(´WRWKHSDUWQXPEHULH$7+9( Extended Plastic Shaft Options: $GG³(,´WRWKHSDUWQXPEHULH()+9(, SD Option for applications requiring high reliability but lower voltage Part No. Working Voltage Withstanding Voltage K_1SD A or K_4SD A_25SD A_30* A_40SD A_55SD 250 250 125 250 250 125 500 500 250 500 500 250 1RWH$BQRWDYDLODEOHLQKLJKYROWDJHFRQ¿JXUDWLRQ www.voltronicscorp.com | Phone: +1.410.749.2424 | 13 K_HV & KE_HV - PTFE Trimmer Capacitors *HQHUDO6SHFL¿FDWLRQV Q at 1GHz at maximum rated C* KE_HV S) Q at 100MHz at maximum rated C*  S)  S) 7HPSHUDWXUH&RHI¿FLHQW 50±50ppm/°C -50±50ppm/°C Insulation Resistance 106 megohms 106 megohms Seal Operating Temperature Rotational Life Torque Vibration 40 pounds/in2 40 pounds/in2 -65°C to +125°C -65°C to +125°C 600 turns 600 turns 0.5-5.0 in-oz 0.5-5.0 in-oz 50g, 10-2000 Hz 50g, 10-2000 Hz 1500g, 0.5 millisecs. 1500g, 0.5 millisecs. Shock U.S. Patent No. 5,229,911 K_HV Drawinq tolerances where not VSHFL¿HG XXX ± .005 XX ± .016 XXX ± .005 XX ± .016 * Self-resonant frequency and Q are measured with no terminals on parts. Part Number DC DC Working Withstanding Voltage .´6HULHV ³.(6HULHV Voltage FIG. 1 FIG. 3 1000 2000 0.2 1 250 500 0.2 1 1000 2000 0.5 4 KEP4HV KP4SD KEP4SD 250 500 0.5 4 KP10HV KEP10HV 1000 2000 0.5 9 KF4HV KEF4HV 1000 2000 0.5 4 KF4SD KEF4SD 250 500 0.5 4 KF10HV KEF10HV 1000 2000 0.5 9 1000 2000 0.2 1 250 500 0.2 1 1000 2000 0.5 4 KT1HV KT1SD FIG. 5 To Above KP1SD KT4HV FIG. 4 From Below KP1HV KP4HV FIG. 2 Capacitance (pF) KET4HV KT4SD KET4SD 250 500 0.5 4 KT10HV KET10HV 1000 2000 0.5 9 KJ1HV 1000 2000 0.2 1 KJ1SD 250 500 0.2 1 KJ4HV KEJ4HV 1000 2000 0.5 4 KJ4SD KEJ4SD 250 500 0.5 4 KJ10HV KEJ10HV 1000 2000 0.5 9 KM4HV KEM4HV 1000 2000 0.5 4 KM4SD KEM4SD 250 500 0.5 4 KM10HV KEM10HV 1000 2000 0.5 9 1RWH$OOEXVKLQJWKUHDGVDUH´ Extended Metal Shaft $GG³(´WR3DUW1XPEHULH.3+9( IN MM IN 0.067 MM 1.70 IN 0.160 4.06 IN 0.280 MM 0.38 0.025 0.63 0.080 2.03 0.190 4.83 0.290 7.37 0.030 0.76 0.085 2.16 0.200 5.08 0.300 7.62 7.11 0.036 0.91 0.093 2.36 0.230 5.84 0.380 9.65 0.040 1.02 0.110 2.79 0.240 6.10 0.470 11.94 0.045 1.14 0.140 3.56 0.264 6.71 0.060 1.52 0.150 3.81 0.270 6.86 Recommended Tuning Tool: TT-100 or TT-500 14 | Phone: +1.410.749.2424 | www.voltronicscorp.com MM 0.015 A Series - Very High Voltage PTFE Trimmer Capacitors *HQHUDO6SHFL¿FDWLRQV AP A_10-4 A_20-4 Capacitance Range 0.8-10pF 0.8-20pF DC Working Voltage 2000 2000 DC Withstanding Voltage 4000 4000 Self-Resonant Frequency* 4.25 GHz at 2pF 3 GHz at 3pF 4PLQDW0+]‹0D[& 7HPSHUDWXUH&RHI¿FLHQW 3000 0±100 ppm/°C 106 megohms ,QVXODWLRQ5HVLVWDQFH#ƒ& Operating Temperature -65°C to +125°C Tuning Torque AJ 3000 0±100 ppm/°C 106 megohms -65°C to +125°C 0.5 to 5.0 in-oz 0.5 to 5.0 in-oz Shock 1500g, 0.5 millisecs. 1500g, 0.5 millisecs. Vibration 50g at 10-2000 Hz 50g at 10-2000 Hz XXX ± .005 XX ± .016 XXX ± .005 XX ± .016 Drawing Tolerances where not VSHFL¿HG A1 SERIES J LEAD STYLE 8 HV CAPACITANCE OPTIONS P, J & T Lead Styles Refer to page 16 Options: Extended metal shaft. Add ‘E’ to the part number i.e. AT10-4E AT For Non-Magnetic parts add ‘NM’ to part number, i.e. NMAT10-4 NT Series Ultra High Voltage PTFE Trimmer Capacitors 4kV to 20kV 9ROWURQLFVQHZ³17´VHULHVRI37)(WULPPHUVDUHGHVLJQHGIRU applications requiring greater capacitance and voltage ratings than the popular smaller trimmers but without the large size and expense of vacuum capacitors. The “NT” Line Offers: z z z z High voltage Non-rotating piston, long life & no tuning noise Extremely stable under shock & vibration Screw head does not move in & out Extended Shaft Options: $GG³(´WRWKHSDUWQXPEHU e.g. NT10-5E Part Number DC Working Voltage DC Withstanding Voltage Capacitance (pF) < Capacitance (pF) > “A” Dim ±.06 “B” Dim ±.06 NT2-20 20000 10000 NT5-18 8750 17500 1.0 2.0 1.205 1.125 1.0 5.0 2.0 NT10-6 3000 6000 1.0 0.75 10.0 1.15 0.38 NT10-12 6000 12000 2.0 10.0 1.83 .063 NT15 2000 4000 1.0 15.0 1.69 0.31 NT25-6 3000 6000 5.0 25.0 1.62 .063 NT25-15 7500 15000 7.0 25.0 1.77 1.13 NT30 3000 6000 4.0 30.0 2.25 1.50 NT50 4500 9000 5.0 50.0 2.25 1.50 NT70-6 3000 6000 2.5 70.0 3.00 0.70 NT70-15 7500 15000 6.5 70.0 3.25 1.63 NT85 3000 6000 5.0 85.0 3.25 1.50 NT100-4 2500 3600 2.0 95.0 4.25 0.31 www.voltronicscorp.com | Phone: +1.410.749.2424 | 15 AIR/PTFE Trimmer Capacitors - Lead Styles P Lead Style B Lead Style F Lead Style M Lead Style T Lead Style C Lead Style J Lead Style D Lead Style T Lead Style with L option E Lead Style 1RWH$OOEXVKLQJWKUHDGVDUH´ Extended Metal Shaft 16 | Phone: +1.410.749.2424 | www.voltronicscorp.com Insulated Bushing ,QVHUW³,´LQ Part Number, i.e. AIT10L P Series - High Q Sealed Sapphire Trimmer Capacitors 9ROWURQLFV³3´OLQHRIVDSSKLUHVXEPLQLDWXUHWULPPHUFDSDFLWRUVLV unique in design. The trimmers have a high Q, zero temperature FRHI¿FLHQWDQGDUHLQWHUQDOO\2ULQJVHDOHGWRNHHSRXWÀX[DQG FOHDQLQJÀXLG