SV2220BB276M500LLW-3

Capacitor Assemblies SV2220 The SV capacitor assemblies are a vertical stacking of ceramic capacitors, offering far superior performance than either aluminum or tantalum electrolytic capacitors. They can be made with up to 10 same size chips with various lead configurations to safeguard against thermal and mechanical stresses and are 100% tested for dielectric withstanding voltage, insulation resistance, capacitance, and dissipation factor. They are ideally suited for the input and output stages of switch-mode power supplies and DC-DC converters, the SV capacitor assemblies offer several key benefits: • Reduces the overall circuit board footprint • High capacitance to volume ratio • Low ESR and low ESL • Capability to handle high ripple currents at high frequencies ELECTRICAL SPECIFICATIONS DIELECTRIC WITHSTANDING VOLTAGE: 250% of rated voltage for 5 seconds INSULATION RESISTANCE AT 25°C: 500 mega-ohm/micro-farad minimum INSULATION RESISTANCE AT 125°C: 50 mega-ohm/micro-farad minimum CAPACITANCE AT 25°C: 1.0±0.2 VRMS at 120 Hz DISSIPATION FACTOR AT 25°C 5% maximum at 1.0±0.2 VRMS at 120 Hz LIFE TEST: 150% of rated voltage at 125°C for 1000 hours MOISTURE RESISTANCE: 10 cycles without voltage. MIL-STD-202 M106 THERMAL SHOCK: MIL-STD-202 M107, test condition A -55°C to +125°C IMMERSION CYCLING: MIL-STD-20 M104, condition B RESISTANCE TO SOLDER HEAT: MIL-STD-202, M210, condition B 20 seconds at 260°C www.knowlescapacitors.com Applications Benefits • Input and output stages of switch mode power supplies and DC-DC converters • High capacitance to volume ratio • Reduces the overall circuit board footprint •S  uperior performance over aluminum or tantalum capacitors • Low ESR and low ESL Capacitance (µF) 14 22 27 47 68 100 220 -3 -5 -10 Voltage 25V 50V 100V -3 -3 -5 -5 -10 -10 Note: Dash number denotes number of capacitors and leads per side. Typical ESR (Ohms) 22µF 27µF 47µF 100µF 220µF ESR @ 1kHz 0.0830 0.0680 0.0400 0.0240 0.0110 ESR @ 10kHz 0.0086 0.0070 0.0040 0.0033 0.0015 ESR @ 50kHz 0.0044 0.0031 0.0020 0.0013 0.0006 ESR @ 100kHz 0.0032 0.0022 0.0015 0.0009 0.0004 www.knowlescapacitors.com LN (STRAIGHT WIRE LEADS) LJ &LL (BENT WIRE LEADS) D D E 0.055±0.010 (1.40±0.25) X LN 0.25 min (6.35 min) LL X 0.070±0.010 (1.78±0.25) LJ 0.010 (0.25) 0.010 (0.25) 0.020±0.002 (0.51±0.05) E 0.020±0.002 (0.51±0.05) C 0.070±0.020 (1.778±0.508) C 0.10 (2.54) 0.10 (2.54) 0.025min/0.100 max (0.63 min/2.54 max) 0.025min/0.100 max (0.63 min/2.54 max) NUMBER STYLE C±.025" D (MAX) E (MAX) X (MAX) -3 LN .250" (6.35) .375" (9.5) .300" (7.62) .285" (7.24) -3 LJ, LL .250" (6.35) .375" (9.5) .300" (7.62) .300" (7.62) -5 LN .250" (6.35) .575" (14.6) .300" (7.62) .285" (7.24) -5 LJ, LL .250" (6.35) .575" (14.6) .300" (7.62) .300" (7.62) -10 LN .250" (6.35) 1.075" (27.3) .300" (7.62) .285" (7.24) -10 LJ, LL .250" (6.35) 1.075" (27.3) .300" (7.62) .300" (7.62) SV 2220 BB 476 M 101 LJ W -10 R SERIES SIZE DIELECTRIC CAPACITANCE TOLERANCE VOLTAGE VDCW LEAD STYLE PACKAGING CAPS/LEADS RoHS See Chart BB = X7R Class II BME Value in picofarads— Two significant figures, followed by number of zeros: 476 = 47,000,000pF M = +/-20% Two significant figures, followed by number of zeros: 250 = 25V 500 = 50V 101 = 100V www.knowlescapacitors.com LN = Straight LL = L Lead LJ = J Lead W= Waffle Pack Number of caps and leads per side R = RoHS compliant with exemption 7a R = 100% Sn finish on lead No R on P/N = 60Sn/40Pb finish on leads