CCF1N5TTE

CCF1N chip fuse EU features • Surface mount fuse suitable for primary and secondary circuits • Ceramic case provides excellent mechanical strength • Suitable for flow and reflow soldering • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction W L t Type L CCF .236±.008 (6.0±0.2) Dimensions inches (mm) W t .098±.008 (2.5±0.2) .098±.008 (2.5±0.2) d .055±.008 (1.4±0.2) d End Cap circuit protection d Ceramic Fuse Case Element ordering information CCF 1 N Type Style Characteristic N: Normal blow 1 Rated Current Reference rating chart T Rated Voltage (UL) Nil: 125Va.c./60Vd.c. or 65Va.c./65Vd.c. D: 125Va.c./160Vd.c. Termination Material T: Sn TE Packaging TE: 4mm pitch embossed plastic (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/12/17 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 293 CCF1N chip fuse applications and ratings Part Designation Current Rating CCF1N0.4 CCF1N0.5 CCF1N0.63 CCF1N0.8 CCF1N1 CCF1N1.25 CCF1N1.6 CCF1N2 CCF1N2.5 CCF1N3.15 CCF1N4 CCF1N5 CCF1N6.3 Voltage Rating 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A CCF1N7 7A CCF1N8 CCF1N10 CCF1N12 8A 10A 12A CCF1N15 15A Operating Temperature Range Fusing Characteristics Interrupting Capacity UL (c-UL) AC 125V 50A DC 60V 50A (DC 160V) UL (c-UL) 100% 200% 4 hour min. 1 second max. PSE AC 100V PSE AC 100V 100A PSE 130% 160% 200% 4 hour min. 1 hour max. 1 second max. UL (c-UL) AC 125V 50A DC 60V 50A UL (c-UL) 100% 200% 4 hour min. 1 second max. -55°C to +125°C Normal Melting l2t (A2, seconds) 650 510 390 250 90.4 75.9 59.3 42.9 36.6 26 20.1 15.3 11.4 0.024 0.030 0.052 0.125 0.156 0.220 0.513 0.814 1.31 2.37 3.85 6.5 10.6 10.6 12.8 9.5 7.5 4.5 17.0 27.7 73.5 3.5 125.5 Rated Current Fusing Time UL (c-UL) AC 125V DC 60V (DC 160V) UL (c-UL) AC 125V DC 60V Internal R. (mΩ) Max. (DC 160V) (DC 160V) UL (c-UL) AC 65V DC 65V UL (c-UL) AC 65V 50A DC 65V 50A UL (c-UL) 100% 200% 4 hour min. 60 seconds max. environmental applications 1.0 0.9 0.8 0.7 0.6 0.5 -55 10 -35 -15 5 25 45 65 85 105 1 .1 .01 .001 0.1 125 Ambient Temperature (°C) 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15 Fusing Characteristics 1.5 1.4 1.3 1.2 1.1 Fusing Time (Sec.) circuit protection Derating Coefficient Number Derating Curve 1 10 100 Fusing Current (A) Performance Characteristics Parameter Fusing Characteristics Surface Temperature Rise Bending Test Requirement ∆ R±% Typical Limit Within specified time. — No restrike — Max. Temp. Rise 140°C Max. Temp. Rise 75°C No mechanical damages — — Test Method Fusing time measured under rated current x 160% and 200% Surface temperature should be measured by rated current x 115% Surface temperature should be measured by rated current x 100% Distance between holding points 90mm, bent by 3mm at rate of 1mm/s ±10% ±3% 260°C ±5°C, 10 seconds ± 0.5 seconds ±95% coverage min. ±10% — ±5% 235°C ±5°C, 3 seconds ± 0.5 seconds 70°C ± 2°C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle Load Life Moisture ±10% ±5% 40°C ± 2°C, 90 - 95% RH, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle Rapid Change of Temperature ±10% ±5% -55°C (30 minutes), +125°C (30 minutes), 100 cycles Resistance to Soldering Heat Solderability Load Life Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 294 12/12/17 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com