CCP2B20

1733 Reader's Spreads pg1-203:document 1/27/09 4:13 PM Page 173 CCP chip fuse EU features • • • • • • • • Immediate cut-off of excessive heat No generation of heat UL94V0 epoxy case Suitable for flow and reflow soldering UL248.14, file #131375 One-time fuse device Marking: Black body color with yellow marking Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction L W h 2E t Electrode e Molded Resin d Size Code 2B L W Dimensions inches (mm) t h e d .063±.008 .047±.008 .031±.004 .126±.008 (1.6±0.2) (1.2±0.2) (0.8±0.1) (3.2±0.2) .098±.008 .087±.008 .075±.004 (2.5±0.2) (2.2±0.2) (1.9±0.1) .047±.004 .024±.004 (1.2±0.1) (0.6±0.1) .067±.004 .02±.004 (1.7±0.1) (0.5±0.1) Buffer Fuse Element ordering information New Part # CCP Type 2B Size Code 2B: 1206 2E: 1210 20 Rating Reference rating chart Nil Fusing Magnification Nil: 2B, 2E: 250% H: 2E: 200% T Termination Material T: Sn TE Packaging TE: 7" embossed plastic (2B - 3,000 pieces/reel) (2E - 2,000 pieces/reel) applications and ratings Part Designation Current Rating Fusing Current Fusing Time Internal R. Maximum (mΩ) Maximum Open Circuit Voltage* Rated Ambient Temperature Operating Temperature Range CCP2B15 0.75A 1.5A 150 CCP2B20 1.00A 2.0A 100 CCP2B25 1.25A 2.5A 75 CCP2B30 1.50A 3.0A 60 CCP2B35 1.75A 3.5A 50 24V 1 second max. CCP2B40 2.00A 4.0A 45 (40V/76V) @ fusing current CCP2B50 2.50A 5.0A 35 CCP2B63 3.15A 6.3A 23 CCP2B80 4.00A 8.0A 19 CCP2B100 5.00A 10.0A 15 * Note: High rated voltage (76V: 0.76A - 2A; 40V: 2.5A - 3.15A) also available, please contact factory. For further information on packaging, please refer to Appendix A. +70°C -40°C to +125°C Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/06/09 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 175 circuit protection 1733 Reader's Spreads pg1-203:document 1/27/09 4:13 PM Page 174 PMS 300 neg. Black neg. CCP chip fuse applications and ratings (continued) Part Designation circuit protection Current Rating Fusing Current Fusing Time Internal R. Maximum (mΩ) Maximum Open Circuit Voltage Rated Ambient Temperature Operating Temperature Range CCP2E10H 1.0A 0.50A 200 CCP2E13H 1.3A 0.65A 170 CCP2E15H 1.5A 0.75A 150 CCP2E20H 1.00A 2.0A 100 CCP2E25H 1.25A 2.5A 75 CCP2E30H 1.50A 3.0A 60 CCP2E35H 1.75A 3.5A 50 CCP2E38H 1.90A 3.8A 48 CCP2E40H 2.00A 4.0A 45 CCP2E45H 2.25A 4.5A 40 CCP2E50H 2.50A 5.0A 35 CCP2E63H 3.15A 6.3A 23 1 second max. 72V NEW CCP2E100 4.00A 10.0A 15 @ fusing current CCP2E10 0.4A 1.0A 200 CCP2E13 0.52A 1.3A 170 CCP2E15 0.6A 1.5A 150 CCP2E20 0.8A 2.0A 100 CCP2E25 1.0A 2.5A 75 CCP2E30 1.2A 3.0A 60 CCP2E35 1.4A 3.5A 50 CCP2E38 1.5A 3.8A 48 CCP2E40 1.6A 4.0A 45 CCP2E45 1.8A 4.5A 40 CCP2E50 2.0A 5.0A 35 CCP2E63 2.5A 6.3A 23 Note: High rated voltage (76V: 0.75A ~ 2A; 40V: 2.5A ~ 3.15A) also available, please contact KOA +70°C -40°C to +125°C environmental applications Derating Curve 100 10 80 Fusing Time (Sec.) Fusing Time (Sec.) % Rated Power 1 .1 .01 1 .1 .01 60 40 20 0 -40 -20 Fusing Characteristics CCP2B 1520 2530 3540 50 63 80 100 10 10 131520 2530353840 45 50 CCP2E, CCP2E H 63 100 0 20 80 100 120 140 160 180 70 125 175 Ambient Temperature (°C) 40 60 .001 0 1 2 3 4 5 6 7 8 9 10 11 12 .001 0 1 2 3 4 5 6 7 8 9 10 11 12 Fusing Current (A) Fusing Current (A) Performance Characteristics Parameter Clearing Time Open Circuit Voltage Residual Resistance Bending Test Resistance to Solder Heat Solderability Load Life Moisture Resistance Temperature Cycling Resistance to Solvent Requirement Within 1 second No fusing, flaming, explosion Over 10kΩ No breakdown of termination and disconnection ∆R: ±10% 95% coverage minimum ∆R: ±10% ∆R: ±10% ∆R: ±10% No aberration of marking in appearance Test Method CCP2B and CCP2E_H: 200% of rated current shall be carried CCP2E: 250% of rated current shall be carried Apply DC voltage between the termination after fusing CCP2B: 24V, CCP2E: 72V Measuring DC resistance after fusing Holding point: 90mm, Bending: 10mm, 1 time 260°C ± 5°C, 10 seconds ± 0.5 seconds, 3 cycles 230°C ± 5°C, 3 seconds ± 0.5 seconds 70°C ± 3°C, 1000 hours, rated current 40°C ± 2°C, 90% RH, rated current -40°C (30 minutes)/+125°C (30 minutes), 10 cycles Conforming to MIL-STD-202F 1/06/09 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 176 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com