CPCN2N502M

SS-246 R4 CPCN 6/11/07 11:02 AM Page 1 KOA SPEER ELECTRONICS, INC. SS-246 R4 AHA 6/11/07 Fixed Ceramics Resistor CPCN Type 1. Features ■ Suitable for noise suppression of engine ignition system ■ Reliable in pulse/transient applications ■ Meets RoHS requirements 2. Dimensions L Lc Size Code CPCN1/2 CPCN1 D CPCN2N CPCN3 Resistive Body Inner End Electrode Cap L Dimensions inches (mm) Lc (min.) D .213 (5.4) .378 (9.6) .452 (11.5) .394 (10.0) .138±.012 (3.5±0.3) .187±.012 (4.75±0.3) .187±.012 (4.75±0.3) .283±.012 (7.2±0.3) CERTIFIED CERTIFIED Cap Plate Type Ni Ni Ni Sn .421±.02 (10.7±0.5) .63±.024 (16.0±0.6) .720±.024 (18.3±0.6) .720±.024 (18.3±0.6) 3. Type Designation The type designation shall be in the following form: CPCN Type 2N Power Rating Symbol 1/2: 0.5W 1: 1.0W 2N: 1.5W 3: 2.0W 502 Nominal Resistance 2 significant figures + 1 multiplier M Tolerance M: ±20% 4. Ratings Absolute Absolute Part Power T.C.R. Nominal Resistance Maximum Maximum Rated Operating Designation Rating (ppm/°C) Resistance Tolerance Working Overload Ambient Temperature Max. Voltage Voltage Temperature Range CPCN1/2 CPCN1 CPCN2N CPCN3 0.5W 1kΩ, 5kΩ, 1.0W 10kΩ, 15kΩ -1200±300 1.5W 2.0W 15kΩ M: ±20% 86V 122V 150V 173V 215V 305V 375V 432V +40°C -40°C to +200°C Coating type of CPCN2N is available on request. Rated Voltage = √Power Rating x Resistance Value or Maximum Working Voltage, whichever is lower. PAGE 1 OF 2 ■ Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. SS-246 R4 CPCN 6/11/07 11:02 AM Page 2 KOA SPEER ELECTRONICS, INC. SS-246 R4 4.1. 100 80 % Rated Power 60 40 20 Derating Curve 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature (°C) 5. Characteristics Requirement Δ R Limit Typical Resistance Resistance Within regulated tolerance T.C.R. Voltage Coefficient Overload Load Life at High Voltage Pulse -1200±300ppm/°C 0 ~ -0.2%/V ±2% ±30% — — ±0.3% — — 1kΩ, 5kΩ 10kΩ, 15kΩ +25°C/-40°C and +25°C/+125°C Rated voltage and rated voltage x 10% Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is less Continuous 250h high voltage pulse on the test circuit (Refer to JIS D5111) Type CPCN1/2 Resistor Body Strength No mechanical damages — CPCN1 CPCN2N CPCN3 Rapid Change of Temperature Moisture Resistance Load Life Low Temperature Operation High Temperature Exposure ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% ±5.0% ±0.9% ±0.7% ±0.7% ±2.0% -55°C (15 minutes), +155°C (15 minutes), 500 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 40°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle -40°C, 24 hours +200°C, 1000 hours Holding Distance Time 5.0 ± 0.2mm 9.0 ± 0.3mm 12.3 ± 0.3mm 490N (50kgf) 10 seconds 98N (10kgf) Force Parameter Test Method Measurement Voltage 10V 30V The resistance measurement before and after the examination should be performed in room temperature with difference ±1°C. PAGE 2 OF 2 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.