GS2LC106G

1733 Reader's Spreads pg1-203:document 1/27/09 4:09 PM Page 114 GS resistors high voltage high resistance thick film resistors EU features • Miniature construction endurable to high voltage and high power • Resistors excellent in anti-surge characteristics • Wide resistance range of 0.5MΩ - 10GΩ and small T.C.R. • Marking: Brown body color with alpha/numeric marking • Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC dimensions and construction L Trimming Line D Ceramic Core d l Type GS 1/4 GS 1/2 GS 1 Resistive Film Insulation Coating GS 3 GS 5 GS 7 GS 10 GS 12 Electrode Lead Cap Wire GS 2 L .248±.039 (6.3±1.0) .374±.039 (9.5±1.0) .591±.059 (15.0±1.5) .945±.059 (24.0±1.5) 2.05±.079 (52.0±2.0) 2.99±.079 (76.0±2.0) 3.82±.118 (97.0±3.0) 4.61±.118 (117.0±3.0) 5.39±.118 (137.0±3.0) .311±.039 (7.9±1.0) .039 (1.0) 1.50±.118 (38.0±3.0) Dimensions inches (mm) D d (Nominal) .091±.020 (2.3±0.5) .138±.024 (3.5±0.6) .177±.039 (4.5±1.0) .026 (0.65) .031 (0.8) l ordering information New Part # GS Type 1/2 Power Rating 1/4: 0.25W 1/2: 0.5W 1: 1W 2: 2W 3: 3W 5: 5W 7: 7W 10: 10W 12: 12W L T.C.R. D(B): ±100 L(A): ±200 C Termination Surface Material C: SnCu Packaging quantity: GS1/4: 100 pieces GS1/2: 50 pieces GS1: 20 pieces GS2 ~ 12: 10 pieces 106 Nominal Resistance ±2%, ±5%, ±10%: 2 significant figures + 1 multiplier ±0.5%, ±1%: 3 significant figures + 1 multiplier J Resistance Tolerance D: ±0.5% F: ±1% G: ±2% J: ±5% K: ±10% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/11/08 116 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreads pg1-203:document 1/27/09 4:09 PM Page 115 PMS 300 neg. Black neg. GS high voltage high resistance thick film resistors applications and ratings T.C.R. Part Power (ppm/°C) Designation Rating Max. GS1/4* 0.25W D: ±100 L: ±200 D: ±100 GS1/2* GS1 GS2 GS3 0.5W 1W 2W 3W L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 D: ±100 L: ±200 0.5M-50M 0.5M -100M Resistance Range (Ω) E-24 & 25, 50x10n (F±1%) (G±2%) (J±5%) Max. Max. Rated Operating Impulse Working Overload Withstand Ambient Temperature Voltage Voltage Voltage Temperature Range 0.5kV 1kV 3kV 5kV 15kV 1kV 2kV 4.5kV 7.5kV 20kV 1.25kV 2.5kV 6kV 10kV 30kV +25°C -55°C to +125°C resistors (D±0.5%) 0.5M-20M (K±10%) 0.5M-100M 0.5M-100M 0.5M-100M 0.5M-200M 0.5M-200M 0.5M-200M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-1G 0.5M-1G 0.5M-5G 0.5M-5G 0.5M-5G 0.5M-5G 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-1G 0.5M-10G 0.5M-10G 0.5M-500M 0.5M-500M 0.5M-500M 0.5M-1G 0.5M-10G 0.5M-10G 1M-500M 1M-500M 1M-500M 0.5M-1G 0.5M-10G 0.5M-10G 1M-500M 1M-500M 1M-500M 0.5M-1G 0.5M-10G 0.5M-10G 1M-500M 1M-500M 1M-500M 0.5M-1G 0.5M-10G 0.5M-10G GS5 GS7 GS10 5W 7W 10W 20kV 30kV 35kV 30kV 40kV 50kV 40kV 50kV 60kV GS12 12W 40kV 60kV 70kV Taping packaging is available for GS1/4 and GS1/2. Please contact factory. environmental applications Derating Curve 100 80 % Rated Power 60 40 20 0 -60 -40 -20 -55 Temperature Rise (°C) Surface Temperature Rise 140 120 100 80 60 40 20 0 0 20 40 60 80 100 GS12 GS10 GS7 GS5 GS3 GS2 GS1 GS1/2 GS1/4 0 20 40 60 80 100 120 140 25 125 Ambient Temperature (°C) % Rated Power Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/29/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 117 1733 Reader's Spreads pg1-203:document 1/27/09 4:09 PM Page 116 GS resistors high voltage high resistance thick film resistors environmental applications Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance @ 25°C Voltage Coefficient Voltage Characteristics Resistance tp Solvent Impulse Withstand Voltage Requirement ∆ R ±% Within regulated tolerance Within specified T.C.R. 2: TCR 200x10 /K 0.5: TCR 100x10-6/K -6 Test Method 25°C +25°C/125°C Rated voltage x 2.5 (GS1/4, GS1/2), rated voltage x 2 (GS1-GS12) or Max. overload voltage, whichever is lower for 5 seconds 350°C ± 10°C, 3 seconds ± 0.5 seconds or 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes)/ +125°C (30 minutes), 5 cycles 40°C, 90% - 95%RH, 1000h 25°C, 1000 hours 1.5 hr ON/0.5 hr OFF cycle GS1/4, 1/2 only, Rated voltage or max. working voltage, whichever is lower and 1/10 of its voltage GS1 - 12, Rated voltage or max. working voltage, whichever is lower and 1/10 of its voltage Soaking in IPA for 1 minute and brushing 10 times -3 cycles liquid temperature 25°C ±5°C An impulse voltage shall be applied 5 times at an interval of 1 minute 2: TCR 200x10-6/K 0.5: TCR 100x10-6/K 2: TCR 200x10-6/K 0.5: TCR 100x10-6/K 5: TCR 200x10-6/K 2: TCR 100x10-6/K 3: TCR 200x10-6/K 2: TCR 100x10-6/K ±50x10-6/V: TCR 200x10-6/K ±10x10-6/V: TCR 100x10-6/K 5: TCR 200x10-6/K 3: TCR 100x10-6/K No evidence of damage to protective coating and marking No abnormality in appearance and flash-over Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/02/06 118 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com