HFC1410VT1R1

KOA SPEER ELECTRONICS, INC. SS-226 R3 NEW Frequency Ceramic Capacitor High HFC Series 1. Features I I I I I I I AHA 8/12/04 CERTIFIED Suitable for surface mounting. (Chip type) Low dielectric loss at high frequency. ( High Q) Narrow tolerance of capacitance Excellent temperature characteristics High reliability and no polarity by single layer ceramic substrate construction 0.10 ~ 1.10 pF available by 0.05 pF range (HFC1005 series) 0.10 ~ 1.20 pF available by 0.05 pF range (HFC1410, 1608, 1610, 1612 series) 2. Applications I Microwave circuit I Mobile phone headset I Others 3. Type Designation Type designation shall be as the following form. HFC Type 1608 Size C Material Code B C G H K N S T V T Termination Material T= 100% Tin TD Packaging R10 Nominal Capacitance 2 Significant digits + zeros with R as decimal 1005: 1.0 x 0.5 mm 1410: 1.4 x 1.0 mm 1608: 1.6 x 0.8 mm 1610: 1.6 x 1.0 mm 1612: 1.6 x 1.2 mm TD: Paper Tape (1005 only-10,000 pcs/reel) TE: Embossed Taping 1410: 3,000 pcs/reel 1608: 4,000 pcs/reel 1610: 3,000 pcs/reel 1612: 3,000 pcs/reel 4. Dimensions Table 1 Part 1005 1410 Bolivar Drive I Dimensions - inches (mm) L W 0.039±0.006 (1.00±0.15) 0.055±0.006 (1.40±0.15) P.O. Box 547 I L W T 0.020±0.004 (0.50±0.10) 0.039±0.004 (1.00±0.10) T 0.020±0.004 (0.50±0.10) 0.039±0.004 (1.00±0.10) Bradford, PA 16701 PAGE 1 OF 9 I I USA I 814-362-5536 Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 4. Dimensions Cont. L W Table 1 Part 1608 T Dimensions - inches (mm) L W 0.063±0.006 (1.60±0.15) 0.063±0.006 (1.60±0.15) 0.063±0.006 (1.60±0.15) 0.031±0.004 (0.80±0.10) 0.039±0.004 (1.00±0.10) 0.047±0.004 (1.20±0.10) T 0.028±0.008 (0.70±0.20) 0.033±0.01 (0.85±0.25) 0.043±0.008 (1.10±0.20) 1610 1612 5. Characteristics of Dielectric Materials Table 2 - HFC1005 Series Material Code T N K V H G S B Table 2 - HFC1410, 1608, 1610, 1612 Series r ε τ f (ppm/°C) 0±10 6±10 6±10 30±10 0±30 0±30 0±30 0±30 Material Code C T N V ε r τ f (ppm/°C) 0±10 0±10 6±10 30±10 37.0±1.5 70.0±3.0 92.0±2.0 113.0±5.0 140.0±3.0 160.0±4.0 180.0±4.0 200.0±5.0 21.5±2.0 37.0±1.5 70.0±3.0 113.0±5.0 6. Standard Specifications Ordering Code HFC1005TTR10 HFC1005TTR15 HFC1005NTR20 HFC1005NTR25 HFC1005KTR30 Capacitance (pF) 0.10 0.15 0.20 0.25 0.30 Tolerance Code (pF) ±0.015 Material Code T N K Rated Voltage DC(V) Operating Temp. Range -55°C 50 to 125°C PAGE 2 OF 9 ±0.030 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 6. Standard Specifications Cont. Ordering Code HFC1005KTR35 HFC1005VTR40 HFC1005VTR45 HFC1005VTR50 HFC1005VTR55 HFC1005VTR60 HFC1005HTR65 HFC1005HTR70 HFC1005HTR75 HFC1005GTR80 HFC1005GTR85 HFC1005GTR90 HFC1005GTR95 HFC1005ST1R0 HFC1005BT1R1 HFC1410VT1R1 HFC1410VT1R2 HFC1410VT1R3 HFC1608CTR10 HFC1608TTR15 HFC1608NTR20 HFC1608NTR25 HFC1608NTR30 HFC1608NTR35 HFC1608VTR40 HFC1608VTR45 HFC1608VTR50 HFC1608VTR55 Capacitance (pF) 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.10 1.10 1.20 1.30 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 Tolerance Code (pF) Material Code K Rated Voltage DC(V) Operating Temp. Range ±0.03 V -55°C H 50 to 125°C ±0.05 G S B ±0.075 V C T 50 -55°C to 125°C ±0.015 N 50 ±0.03 V -55°C to 125°C PAGE 3 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 6. Standard Specifications Cont. Ordering Code HFC1610VTR60 HFC1610VTR65 HFC1610VTR70 HFC1610VTR75 HFC1610VTR80 HFC1610VTR85 HFC1610VTR90 HFC1612VTR95 HFC1612VT1R0 Capacitance (pF) 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Tolerance Code (pF) ±0.03 Material Code Rated Voltage DC(V) Operating Temp. Range -55°C V ±0.05 50 to 125°C ±0.05 V 50 -55°C to 125°C 8. Self Resonant Frequency (SRF) vs. Capacitance Value HFC1410, 1608, 1610, 1612, series 100 Self Resonant Frequency (GHz) Type: HFC1612VT1R0R05M50 (1.0 pF) Q vs. Frequency 10,000 5 ESR vs. Frequency 1000 1 10 100 0.1 10 1 0.1 1 Capacitance (pF) 10 1 500 1000 Frequency (MHz) 1800 0.01 500 1000 Frequency (MHz) 1800 PAGE 4 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 9. Characteristics 9-1 Electrical Characteristics Item Capacitance Requirement Within the specified tolerances of parts Conditions Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Test Voltage: Rated Voltage Electrification Time: 60 ± 5 sec Test Voltage: 300% of the Rated Voltage Electrification Time: 1 to 5 sec Limit Surge Current: 50 mA or less Q Value 100 or more Insulation Resistance Breakdown Voltage 10,000 MΩ or more No break down 9-2 Mechanical Characteristics Item Adhesion of Electrodes Requirement No mechanical damage Conditions A static load of 5N(0.5 kgf) shall be applied in the direction of the arrow as follows Printed Board Chip Load (5N) Core Body Strength Substrate Bending Test No mechanical damage A static load of 5N(0.5 kgf) using a R 0.5 pressure rod shall be applied on the core of the component and held for 10 sec Solder a specimen to the substrate and bend it. (Displacement: 2mm) 20 Substrate Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Weight Displacement 45 ± 2 45 ± 2 PAGE 5 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 9-3 Endurance Characteristics Item Solderability Requirement A new coating of solder shall cover a minimum of 95% of the surface being immersed Conditions Flux: 25 wt% colophony Solder: H60A (Silver 3%) Preheating: 150°C for 1 min Soldering Temperature: 230 ± 5°C Soldering Temperature: 215 ± 5°C (MC1005) Immersion Time: 3 ± 1 sec Flax: 25 wt% colophony Solder: H60A (Silver 3%) Soldering Temperature: 270 ± 5°C Immersion Time: 10 ± 1 sec Temperature: 60 ± 2°C Relative Humidity: 95% RH Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Temperature: 85 ± 2°C Relative Humidity: 85% RH Test Hours: 1000 -0/+48 hours Temperature: 125 ± 2°C Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Temperature: -55 ± 2°C Test Hours: 1000 -0/+48 hours Temperature: -55°C 30 min 125°C 30 min Hours for 1 Cycle: 2 hours Temperature Cycle: 50 cycles or more Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Frequency of Vibration: 10 to 100 Hz Sweeping: 10→100→10Hz 5 min 5.0 G This motion shall be applied for a period of 2 hrs in each of 3 mutually perpendicular axes Half of sine wave (100 G) shall be applied for a period of 5 msec. in each of 3 mutually perpendicular axes Resistance to Soldering Heat Resistance to Humidity (Load Test) Resistance to Humidity (Unload Test) Resistance to High Temperature Resistance to Low Heat Temperature Cycle Vibration Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Shock The specimen shall be subjected to standard atmospheric condition for 24 hours after which measurement shall be made. PAGE 6 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 10. Packaging (1) Dimensions of Carrier Tape Embossed Tape T Paper Tape T1 H F J Dimensions in inches (mm) E D C G T1 T B A Dimensions in inches (mm) A 0.026 ± 0.001 (0.65 ± 0.03) 0.047 ± 0.002 (1.20 ± 0.05) 0.039 ± 0.002 (1.00 ± 0.05) 0.047 ± 0.002 (1.20 ± 0.05) 0.055 ± 0.002 (1.40 ± 0.05) B 0.79 ± 0.002 (2.00 ± 0.05) 0.157 ± 0.004 (4.00 ± 0.10) 0.157 ± 0.004 (4.00 ± 0.10) 0.157 ± 0.004 (4.00 ± 0.10) 0.157 ± 0.004 (4.00 ± 0.10) C 0.315 ± 0.004 (8.00 ± 0.10) 0.315 ± 0.008 (8.00 ± 0.20) 0.315 ± 0.008 (8.00 ± 0.20) 0.315 ± 0.008 (8.00 ± 0.20) 0.315 ± 0.008 (8.00 ± 0.20) D 0.138 ± 0.002 (3.50 ± 0.05) 0.138 ± 0.002 (3.50 ± 0.05) 0.138 ± 0.002 (3.50 ± 0.05) 0.138 ± 0.002 (3.50 ± 0.05) 0.138 ± 0.002 (3.50 ± 0.05) E 0.069 ± 0.004 (1.75 ± 0.10) 0.069 ± 0.004 (1.75 ± 0.10) 0.069 ± 0.004 (1.75 ± 0.10) 0.069 ± 0.004 (1.75 ± 0.10) 0.069 ± 0.004 (1.75 ± 0.10) HFC1005 HFC1410 HFC1608 HFC1610 HFC1612 Dimensions in inches (mm) F G H 0.157 ± 0.004 0.045 ± 0.001 0.059 +0.004/-0 HFC1005 (4.00 ± 0.10) (1.15 ± 0.03) (ø 1.50 +0.1/-0) HFC1410 HFC1608 HFC1610 HFC1612 0.157 ± 0.004 0.063 ± 0.002 (4.00 ± 0.10) (1.60 ± 0.05) 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) J N/A T 0.026 ± 0.001 (0.65 ± 0.02) T1 0.024 ± 0.002 (0.60 ± 0.05) 0.047 ± 0.004 (1.20 ± 0.10) 0.030 or 0.037 ± 0.004 (0.75 or 0.95 ± 0.10) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 0.031 or 0.039 or 0.047 ± 0.004 (2.00 ± 0.05) (0.30 ± 0.05) (0.80 or 1.00 or 1.20 ± 0.10) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.055 ± 0.004 (1.40 ± 0.10) PAGE 7 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 (2) Reel specifications for taping C E D B W A Dimensions in inches (mm) A HFC Series HFC1005 only 7.00 ± 0.78 (178 ± 2) B 3.15 (80 min.) 2.36 (60 min.) C 0.511 ± 0.02 (13 ± 0.5) D 0.83 ± 0.03 (21 ± 0.8) E 0.079 ± 0.02 (2 ± 0.5) W 0.394 ± 0.059 (10 ± 1.5) (3) Standard Packing Quantity Chip Size 1005 1410 1608 1610 1612 Quantity 10,000 pcs/reel 3,000 pcs/reel 4,000 pcs/reel 3,000 pcs/reel 3,000 pcs/reel PAGE 8 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 12. General Information (1) Storage The products shall be stored at 10°C to 35°C at the humidity of 30% to 70%. The products shall not be stored where they are exposed to harmless gases. (Ex. Hydrogen chloride, Sulfurous acid gas or Hydrogen sulfide) Soldering shall be done 12 months since delivery. When the former requirements are not satisfied, the solderability test shall be done prior to soldering. (4) Cleaning Cleaning using isopropyl alcohol shall be done at a temperature of 60°C or less within 5 minutes. It has been checked that the products aren’t damaged by ultrasonic cleaning at a cleaning agent temperature of 60°C or less, a frequency of 28kHz and a power of 20W within a minute. (6) Pattern design The land pattern is recommended as follows. G (3) Soldering Ceramics are in general very sensitive to thermal shocks. Therefore the products shall not be exposed to a sudden temperature increase, decrease or partial heating. Preheat shall be done before using the soldering iron (ex. Hot wind etc.) Temperature difference between temperature of soldering iron tip and temperature of the products shall not exceed 130°C. The soldering iron shall not contact directly with the product, in order to avoid damage to the product. It is desirable that soldering temperature is 240°C to 250°C. Flux shall be colophony type. Strong acid type flux shall not be used. Wattage of the soldering iron shall be 20W or less at the temperature of 220°C to 250°C. The tip of soldering iron shall be 3ø or less. Application time of the soldering shall be 4 seconds or less. Dimensions - inches (mm) Part L 0.015 (0.40) 0.031 (0.80) 0.039 (1.00) 0.039 (1.00) 0.039 (1.00) W 0.020 (0.50) 0.039 (1.00) 0.031 (0.80) 0.039 (1.00) 0.047 (1.20) W 1005 1410 1608 1610 1612 13. Recommended Soldering Conditions Recommended Condition for Flow Soldering Preheat 120 Seconds Max. 250°C Soldering 3-4 Seconds Max. Natural Cooling 250°C Recommended Condition for Reflow Soldering Preheat 180 Seconds Max. Soldering 10 Seconds Max. Natural Cooling 120 Seconds Min. 120 Seconds Min. 150°C 230°C - 250°C 150°C 230°C - 250°C PAGE 9 OF 9 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Notice: The information contained in this Spec Sheet is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.