HV732ATTD2373F

resistors HV73 flat chip resistors for high voltage EU features • Superior to RK73 series in maximum working voltage • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction L c Type c W Sn Plating Ni Plating t Protective Coating d Resistive Inner Film Electrode Ceramic Substrate Dimensions inches (mm) W c d L (Inch Size Code) 1J (0603) .063±.008 .031±.004 .012±.004 .012±.004 .018±.004 (1.6±0.2) (0.8±0.1) (0.3±0.1) (0.3±0.1) (0.45±0.1) 2A (0805) .079±.008 .049±.004 .016±.008 (2.0±0.2) (1.25±0.1) (0.4±0.2) .012 2B (1206) .126±.008 .063±.008 (1.6±0.2) (3.2±0.2) .02±.012 (0.5±0.3) .016 2H (2010) .197±.008 .098±.008 (2.5±0.2) (5.0±0.2) .02±.012 (0.5±0.3) 3A (2512) .248±.008 .122±.008 (3.1±0.2) (6.3±0.2) .02±.012 (0.5±0.3) Derating Curve 80 80 % Rated Power 100 % Rated Power 100 60 40 t (0.3 (0.4 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) +.008 -.004 +0.2 ) -0.1 .024±.004 (0.6±0.1) +.008 -.004 +0.2 (0.4 -0.1 ) .016 +.008 -.004 (0.4 +0.2 -0.1 ) .016 .024±.004 (0.6±0.1) .024±.004 (0.6±0.1) 1J/0.1W (80°C) 2H/0.5W (90°C) 2A, 2B/0.25W (100°C) 3A/1W (105°C) 60 40 20 20 0 -60 -40 -20 -55 0 0 -60 -40 -20 -55 80 100 120 140 160 155 70 Ambient Temperature (°C) 20 40 60 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. 0 20 40 60 80 100 120 140 160 85 90 105 155 Terminal Part Temperature (°C) For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the above derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. ordering information HV73 2B Type Size 1J: 0.1W 2A: 0.25W 2B: 0.25W 2H: 0.5W 3A: 1W T Termination Material T: Sn TD Packaging TD: 0603, 0805, 1206: 7" 4mm pitch punched paper TE: 2010 & 2512: 7" embossed plastic For further information on packaging, please refer to Appendix A 1004 Nominal Resistance ±0.5%, ±1%: 3 significant figures + 1 multiplier ±2%, ±5%: 2 significant figures + 1 multiplier Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 46 F Resistance Tolerance D: ±0.5% F: ±1% G: ±2% J: ±5% 10/21/20 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com flat chip resistors for high voltage applications and ratings Rated T.C.R. Rated Terminal (ppm/°C) Ambient E-24/E-96 Part Max. Temp. (D±0.5%) Temp. Part Designation Power Rating @ 70°C 1J 0.1W 70°C 80°C ±100** — 2A 0.25W 70°C 100°C ±100 ±200 2B 0.25W 70°C 100°C 2H 0.5W 70°C 90°C 1W 70°C Absolute Maximum Operating Maximum Overload Temp. Working Voltage Range Voltage (D.C.)* E-24/E-96 (F±1%) E-24 (G±2%) E-24 (J±5%) 10k - 10M 10k - 10M 10k - 10M 350V 500V* 100k - 1M — 100k - 10M 100k - 10M 100k - 10M — — 11M - 51M 400V 800V* ±100 ±200 100k - 1M — 100k - 10M 100k - 10M 100k - 10M — — 11M - 51M 800V 1000V* ±100 ±200 100k - 1M — 100k - 10M 100k - 10M 100k - 10M 10.2M - 51M 11M - 51M 11M - 51M 2000V (D.C.) 3000V* ±300 — 51.1M - 100M 56M - 100M 56M - 100M ±100 ±200 * Max. overload voltage is specified by D.C. voltage 3A Resistance Range (Ω) 43k - 1M — 105°C -55°C to +155°C 43k - 10M 43k - 10M 43k - 10M 3000V 4000V* (D.C.) 10.2M - 20M 11M - 20M 11M - 51M ** Cold T.C.R. (-55°C ~ +25°C) of 1.02MΩ ~ 10MΩ is +200x10-6/K If any questions should arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” please give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves on the terminal part temperature” in the beginning of the catalog. Rated voltage = √Power rating x resistance value or max. working voltage, whichever is lower environmental applications Temperature Rise 30 25 20 15 10 5 10 20 30 40 50 60 70 80 60 2B 50 2A 40 30 20 10 0 90 100 2B 2A 10 20 30 40 T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure 80 Temperature Rise (°C) 140 90 100 1 2A 1J 0.1 0.01 .001 .01 .1 100 1 10 100 1000 1000 100 10 1 .001 3A 2H 2B .01 .1 1 10 100 1000 Pulse Duration (ms) 3A 3A 2H 2H 120 80 Measurement condition Room temperature: 25°C PCB: FR-4t = 1.6mm Cu foil thickness: 35µm ①: Hot spot 60 The maximum applicable voltage is equal to the max. overload voltage. Please ask us about the resistance characteristic of continuous applied pulse. The pulse endurance values are not assured values, so be sure to check the products on actual equipment when you use them. ②: Terminal 40 20 10 20 Performance Characteristics Resistance 70 10 HV73 2H-3A 0 Parameter 60 Power Rating (%) Power Rating (%) Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. 50 HV73 2B-3A 100 One-Pulse Limiting Electric Power (W) HV73 1J-2A 70 1J 1J Temperature Rise (°C) Temperature Rise (°C) 35 0 One-Pulse Limiting Electric Power HV73 2A-2B One-Pulse Limiting Electric Power (W) HV73 1J 30 40 50 60 70 80 90 100 Power Rating (%) Requirement ∆ R ±(%+0.1Ω) Limit Typical Within regulated — tolerance Within specified — T.C.R. ±2% ±0.5% ±1% ±0.5% ±0.5%: ±0.3%: (10kΩ≤R≤10MΩ) (10kΩ≤R≤10MΩ) ±1%: ±0.5%: (10MΩ≤R≤100MΩ) (10MΩ≤R≤100MΩ) ±2% ±2% ±2% ±0.75% ±0.75% ±0.3% Test Method 25°C +25°C/-55°C and +25°C/+125°C Rated Voltage (D.C.) x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 100 cycles 40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +155°C, 1000 hours Additional environmental applications can also be found at www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/06/19 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 47 resistors HV73