0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
HV732ATTD9093F

HV732ATTD9093F

  • 厂商:

    KOA(兴亚)

  • 封装:

    0805

  • 描述:

    RES 909K OHM 1% 1/8W 0805

  • 详情介绍
  • 数据手册
  • 价格&库存
HV732ATTD9093F 数据手册
resistors HV73 flat chip resistors for high voltage EU features • Superior to RK73 series in maximum working voltage • Marking: 1J: No marking, black protective coating 2A ~ 3A: White three-digit marking on black protective coating • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction L c Type c W Solder Plating Ni Plating t d Protective Coating L (Inch Size Code) Resistive Inner Film Electrode Ceramic Substrate Dimensions inches (mm) W c d t 1J (0603) .063±.008 .031±.004 .012±.004 .012±.004 .018±.004 (1.6±0.2) (0.8±0.1) (0.3±0.1) (0.3±0.1) (0.45±0.1) 2A (0805) .079±.008 .049±.004 .016±.008 (2.0±0.2) (1.25±0.1) (0.4±0.2) .012 2B (1206) .126±.008 .063±.008 (1.6±0.2) (3.2±0.2) .02±.012 (0.5±0.3) .016 2H (2010) .197±.008 .098±.008 (2.5±0.2) (5.0±0.2) .02±.012 (0.5±0.3) .016 3A (2512) .248±.008 .122±.008 (3.1±0.2) (6.3±0.2) .02±.012 (0.5±0.3) (0.3 (0.4 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) +.008 -.004 +0.2 ) -0.1 .024±.004 (0.6±0.1) +.008 -.004 +0.2 (0.4 -0.1 ) .016 +.008 -.004 (0.4 +0.2 -0.1 ) .024±.004 (0.6±0.1) .024±.004 (0.6±0.1) ordering information New Part # HV73 2B Type Size 1J: 0.1W 2A: 0.125W 2B: 0.25W 2H: 0.5W 3A: 1W T Termination Material T: Sn TD Packaging TD: 0603, 0805, 1206: 7" 4mm pitch punched paper TDD: 0603, 0805, 1206: 10" paper tape TE: 2010 & 2512: 7" embossed plastic TED: 2010 & 2512: 10" embossed plastic For further information on packaging, please refer to Appendix A 1004 F Nominal Resistance ±0.5%, ±1%: 3 significant figures + 1 multiplier ±2%, ±5%: 2 significant figures + 1 multiplier Resistance Tolerance D: ±0.5% F: ±1% G: ±2% J: ±5% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 26 12/22/10 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com flat chip resistors for high voltage applications and ratings E-24 (D±0.5%) E-24 (F±1%) E-24 (G±2%) E-24 (J±5%) Absolute Maximum Working Voltage ±100** — 10k - 10M 10k - 10M 10k - 10M 350V 500V* ±100 100k - 1M 100k - 10M 100k - 10M 100k - 10M Part Designation Power Rating @ 70°C T.C.R. (ppm/°C) Max. 1J 0.1W 2A 0.125W 2B 0.25W 2H 0.5W 3A 1W Resistance Range (Ω) Maximum Overload Voltage (D.C.)* ±200 — — — 11M - 51M 400V 800V* ±100 100k - 1M 100k - 10M 100k - 10M ±200 — — — 100k - 10M 11M - 51M 500V 1000V* 100k - 10M 11M - 51M 2000V(*D.C.) 3000V* 43k - 10M 11M - 51M 3000V(*D.C.) 4000V* ±100 100k - 1M 100k - 10M 100k - 10M ±200 — — — ±100 43k - 1M 43k - 10M 43k - 10M ±200 — 11M - 20M 11M - 20M Operating Temperature Range -55°C to +155°C * AC Voltage Reference: When using for A.C. Voltage, use the peak A.C. Voltage, which should not exceed the Maximum DC Overload Voltage (Max. DC Voltage/ √2) ** Cold T.C.R. of 1.1MΩ ~ 10MΩ is +200x10-6/K environmental applications Derating Curve 100 % Rated Power 80 60 40 20 0 -60 -40 -20 -55 0 20 40 60 80 100 120 140 160 70 155 Ambient Temperature (°C) Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement ∆ R ±(%+0.1Ω) Limit Typical Within regulated — tolerance Within specified — T.C.R. ±2% ±0.5% ±1% ±0.5% ±0.5%: ±0.3%: (10KΩ≤R≤10MΩ) (10KΩ≤R≤10MΩ) ±1%: ±0.5%: (11MΩ≤R≤51MΩ) (11MΩ≤R≤51MΩ) Test Method 25°C +25°C/-55°C and +25°C/+125°C Rated Voltage (D.C.) x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 100 cycles ±2% ±2% ±0.75% ±0.75% 40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle ±2% ±0.3% +155°C, 1000 hours Additional environmental applications can also be found at www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/19/11 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 27 resistors HV73
HV732ATTD9093F
物料型号:HV73

器件简介: - HV73系列电阻器适用于高电压应用,与RK73系列相比,具有更高的最大工作电压。 - 符合欧盟RoHS要求,不含铅的端接材料。 - 有黑色保护涂层和白色三位数字标记。

引脚分配:文档中没有明确提到引脚分配,但提供了不同尺寸代码的电阻器尺寸。

参数特性: - 尺寸和构造:包括陶瓷基板、内电极、电阻膜、保护涂层、焊料镀层等。 - 订购信息:提供了不同尺寸和电阻值的型号和包装方式。

功能详解: - 应用和额定值:提供了不同型号的功率等级、温度系数、电阻范围、最大绝对工作电压、最大过载电压和工作温度范围。 - 环境应用:提供了额定功率随环境温度变化的降额曲线。

应用信息: - 性能特性:包括电阻公差、温度系数、短时间过载、耐焊性、快速温度变化、耐湿性、70°C耐久性和高温暴露等。

封装信息: - 提供了不同尺寸代码的电阻器的尺寸和订购信息。
HV732ATTD9093F 价格&库存

很抱歉,暂时无法提供与“HV732ATTD9093F”相匹配的价格&库存,您可以联系我们找货

免费人工找货