HV73V2BTTD1003F

resistors HV73V flat chip resistors for high voltage (automotive) EU features • Superior to RK73 series in maximum working voltage • Suitable for flow and reflow solderings • Products meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • Suitable for high reliable applications like automotives • AEC-Q200 tested dimensions and construction c Type (Inch Size Code) L c 1J (0603) 1J AT (0603) W Sn Plating 2A (0805) Ni Plating t d Protective Coating 2A AT (0805) Resistive Inner Film Electrode 2B (1206) Ceramic Substrate 2B AT (1206) Derating Curve 100 100 80 80 % Rated Power % Rated Power Dimensions inches (mm) W c d t .012±.004 .012±.004 .063±.008 .031±.004 (0.3±0.1) (0.3±0.1) .018±.004 (1.6±0.2) (0.8±0.1) .014±.006 .02±.008 (0.45±0.1) (0.35±0.15) (0.5±0.2) +.008 .016±.008 .012 -.004 .02±.004 +0.2 .079±.008 .049±.004 (0.4±0.2) (0.5±0.1) (0.3 -0.1 ) (2.0±0.2) (1.25±0.1) .018±.010 .024±.008 .022±.004 (0.45±0.25) (0.6±0.2) (0.55±0.1) .016 +.008 -.004 .02±.012 (0.4 +0.2 .126±.008 .063±.008 (0.5±0.3) .024±.004 -0.1 ) (1.6±0.2) (3.2±0.2) (0.6±0.1) .022±.014 .031±.008 (0.55±0.35) (0.8±0.2) L 1J, 2A, 2B 60 40 20 60 40 20 0 -60 -40 -20 -55 0 0 -60 -40 -20 -55 80 100 120 140 160 70 155 Ambient Temperature (°C) 20 40 60 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. 0 20 40 60 80 100 120 140 160 155 125 Terminal Part Temperature (°C) For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the above derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. ordering information HV73V 2A T Type Size Characteristics HV73V 1J: 0.1W 2A: 0.25W 2B: 0.33W Nil: Standard New A: Heat shock resistance *1 Termination Material T: Sn *1 With type A, only T is available as the terminal surface material. TD Packaging TD: 7" 4mm pitch punched paper TE: 7" 4mm pitch embossed plastic For further information on packaging, please refer to Appendix A 104 J Nominal Resistance ±0.5%, ±1%: 3 significant figures + 1 multiplier ±2%, ±5%: 2 significant figures +1 multiplier Resistance Tolerance D: ±0.5% F: ±1% G: ±2% J: ±5% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 48 7/06/23 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com flat chip resistors for high voltage (automotive) applications and ratings Rated T.C.R. Power Rated Terminal (ppm/°C) Rating Ambient E-24/E-96 Part Max. @ 70°C Temp. (D±0.5%) Temp. Part Designation Resistance Range (Ω) Maximum Operating Overload Temperature Voltage Range (D.C.)*2 Maximum Working Voltage E-24/E-96 (F±1%) E-24 (G±2%) E-24 (J±5%) 10k - 10M 10k - 10M 10k - 10M 350V 500V* HV73V1J 0.1W 70°C 125°C ±100*3 — HV73V2A 0.25W 70°C 125°C ±100 ±200 100k - 1M — 100k - 10M 100k - 10M 100k - 10M — — 11M - 51M 400V 800V* HV73V2B 0.33W 70°C 125°C ±100 ±200 100k - 1M — 100k - 10M 100k - 10M 100k - 10M — — 11M - 51M 800V 1200V* -55°C to +155°C Rated voltage = √Power rating x resistance value or max. working voltage, whichever is lower *3 Cold T.C.R. (-55°C ~ +25°C) of 1.02MΩ ~ 10MΩ is +200x10-6/K *2 Maximum Overload Voltage is specified by D.C. voltage If any questions should arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” please give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves on the terminal part temperature” in the beginning of the catalog. environmental applications One-Pulse Limiting Electric Power HV73V 1J HV73V 2A-2B 70 1J 1J 30 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100 Temperature Rise (°C) Temperature Rise (°C) 35 60 2B 2A 50 2B 2A 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 One-Pulse Limiting Electric Power (W) Temperature Rise HV73 1J-2B 1000 100 10 1 2B 2A 1J 0.1 0.01 .001 .01 .1 Power Rating (%) Power Rating (%) Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. 1 10 100 1000 Pulse Duration (ms) The maximum applicable voltage is equal to the max. overload voltage. Please contact factory for resistance characteristics of continuous applied pulse. Measurement condition Room temperature: 25°C PCB: FR-4t = 1.6mm Cu foil thickness: 35µm ①: Hot spot ②: Terminal Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement Δ R ±(%+0.1Ω) Limit Typical Within regulated — tolerance Within specified T.C.R. — ±2% ±0.5% ±1% ±0.5% ±0.5%: (10kΩ≤R≤10MΩ) ±0.3%: (10kΩ≤R≤10MΩ) ±1%: (11MΩ≤R≤51MΩ) ±0.5%: (11MΩ≤R≤51MΩ) Characteristic (A) Characteristic (A) Heat Shock Resistance Heat Shock Resistance ±2% ±0.75% ±2% ±0.75% ±2% ±0.3% Test Method 25°C +25°C/-55°C and +25°C/+125°C Rated Voltage (D.C.) x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second Characteristic (Nil) Standard: -55°C (30 minutes), +125°C (30 minutes), 100 cycles Characteristic (A) Heat Shock Resistance: -55°C (30 minutes), +125°C (30 minutes), 1000 cycles 40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +155°C, 1000 hours Additional environmental applications can also be found at www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 5/17/23 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 49 resistors HV73V