KL732ATTE18N

1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:49 PM Page 18 KL73 thin film inductor EU features Excellent for high frequency applications Low DC resistance and high Q Suitable for reflow and wave soldering Low tolerance ±2% available Small size allows for high density mounting (1E, 1J, 2A, 2B) • Marking: Yellow marking on blue protective coating (1E, 1J, 2A, 2B) • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction c L c Marking Protective Coating Inner Electrode t d Coil Pattern Ceramic Substrate Electrode Type (Inch Size Code) • • • • • L Dimensions inches (mm) W c d t W 1E (0402) 1J (0603) 2A (0805) 2B (1206) .039±.004 .02±.002 .006±.004 .01±.004 .014±.002 (1.0±0.1) (0.5±0.05) (0.15±0.1) (0.25±0.1) (0.35±0.05) .063±.008 .031±.004 .012±.004 .012±.004 (1.6±0.2) (0.8±0.1) (0.3±0.1) (0.3±0.1) .079±.008 .049±.008 .016±.008 .012±.004 (2.0±0.2) (1.25±0.2) (0.4±0.2) (0.3±0.2) .126±.008 .063±.008 (3.2±0.2) (1.6±0.2) .02±.008 (0.5±0.2) .016 (0.4 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) .02±.004 (0.5±0.1) .024±.004 (0.6±0.1) Insulation Direction Mark Film Inductance Marking Part 1J (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 Marking L1 L2 L3 L4 22 27 33 39 47 56 68 82 Part 1J (nH) 10 12 15 18 22 27 33 39 47 56 68 82 Marking 10 12 15 H1 H2 H3 H4 H5 H6 H7 H8 H9 Part Marking 2A 2B Value (nH) 2.2 - 8.2 Value (nH) 10 and higher Ex. = 2.2 = 2.2nH Ex. = 15 = 15nH Ex. = 2N2 = 2.2nH Ex. = 15N = 15nH No marking on 1E (0402) ordering information New Part # KL73 Type 2A Size Code 1E: 0402 1J: 0603 2A: 0805 2B: 1206 T Termination Material T: Sn TE Packaging TP: 7" paper 2mm pitch (1E only - 10,000 pieces/reel) TE: 7" embossed plastic 4mm pitch (1J, 2A, 2B - 4,000 pieces/reel) 4N7 Nominal Inductance 4N7: 4.7nH 47N: 47nH G Tolerance B: ±0.1nH C: ±0.2nH G: ±2% J: ±5% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/07/09 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 213 inductors 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:50 PM Page 19 KL73 thin film inductor applications and ratings Part Designation KL731ETTPN56B KL731ETTPN68B KL731ETTPN82B KL731ETTP1N0* KL731ETTP1N2* KL731ETTP1N5* KL731ETTP1N8* KL731ETTP2N2* KL731ETTP2N7* KL731ETTP3N3* KL731ETTP3N9* KL731ETTP4N7* KL731ETTP5N6* KL731ETTP6N8* KL731ETTP8N2* KL731ETTP10N* KL731ETTP12N* KL731ETTP15N* KL731ETTP18N* KL731ETTP22N* KL731ETTP27N* KL731ETTP33N* KL731JTTE1N0* KL731JTTE1N2* KL731JTTE1N5* KL731JTTE1N8* KL731JTTE2N2* KL731JTTE2N7* KL731JTTE3N3* KL731JTTE3N9* KL731JTTE4N7* KL731JTTE5N6* KL731JTTE6N8* KL731JTTE8N2* KL731JTTE10N* KL731JTTE12N* KL731JTTE15N* KL731JTTE18N* KL731JTTE22N* KL731JTTE27N* KL731JTTE33N* KL731JTTE39N* KL731JTTE47N* KL731JTTE56N* KL731JTTE68N* Inductance (nH) 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 Inductance Tolerance Quality Factor Minimum Self Resonant Frequency Minimum (MHz) 14000 DC Resistance Maximum (Ω) 0.10 700 Allowable DC Current Maximum (mA) Measured Frequency (MHz) B: ±0.1nH 7 12000 10000 B: ±0.1nH C: ±0.2nH 8000 6000 5000 4000 3000 2500 G: ±2% J: ±5% 2000 1500 0.15 0.20 0.25 0.30 0.50 1.00 650 600 550 500 450 350 300 250 200 200 500 inductors 10 1.50 2.00 3.00 5.00 7 150 1000 10 15 13000 0.10 10000 C: ±0.2nH 20 8000 6000 5000 4000 3000 2500 2000 G: ±2% J: ±5% 1500 1000 10 600 2.50 1.50 200 0.50 0.15 0.25 650 450 500 350 25 1.0 250 150 200 120 4.00 4.50 100 * Add tolerance character (B, C, G, J) For complete environmental specifications, please refer to pages 216. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/18/08 214 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:51 PM Page 20 PMS 300 neg. Black neg. KL73 thin film inductor applications and ratings (continued) Part Designation KL732ATTE1N0* KL732ATTE1N2* KL732ATTE1N5* KL732ATTE1N8* KL732ATTE2N2* KL732ATTE2N7* KL732ATTE3N3* KL732ATTE3N9* KL732ATTE4N7* KL732ATTE5N6* KL732ATTE6N8* KL732ATTE8N2* KL732ATTE10N* KL732ATTE12N* KL732ATTE15N* KL732ATTE18N* KL732ATTE22N* KL732ATTE27N* KL732ATTE33N* KL732ATTE39N* KL732ATTE47N* KL732ATTE56N* KL732ATTE68N* KL732ATTE82N* KL732BTTE2N2* KL732BTTE2N7* KL732BTTE3N3* KL732BTTE3N9* KL732BTTE4N7* KL732BTTE5N6* KL732BTTE6N8* KL732BTTE8N2* KL732BTTE10N* KL732BTTE12N* KL732BTTE15N* KL732BTTE18N* KL732BTTE22N* KL732BTTE27N* KL732BTTE33N* KL732BTTE39N* KL732BTTE47N* KL732BTTE56N* KL732BTTE68N* KL732BTTE82N* KL732BTTE100* Inductance (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Inductance Tolerance Quality Factor Minimum Self Resonant Frequency Minimum (MHz) 13000 10000 9000 C: ±0.2nH 8000 800 6000 inductors DC Resistance Maximum (Ω) Allowable DC Current Maximum (mA) Measured Frequency (MHz) 20 900 0.25 25 5000 4500 4000 3000 2500 2000 1500 1000 500 700 0.50 500 400 1.00 300 250 1.50 G: ±2% J: ±5% 20 15 800 700 600 9000 7000 6000 5000 4500 4000 3500 3000 2500 40 G: ±2% J: ±5% 25 2000 200 200 4.00 5.00 150 10 25 C: ±0.2nH 0.25 1000 900 0.50 800 500 35 1.00 1500 500 1000 2.00 400 200 500 15 400 200 * Add tolerance character (B, C, G, J) For complete environmental specifications, please refer to pages 216. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/10/06 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 215 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:51 PM Page 21 PMS 300 neg. Black neg. KL73 thin film inductor environmental applications Performance Characteristics Parameter Resistance to Soldering Heat Requirements Maximum ∆ L/L Limit Typical ∆ L/L: ±0.5% ∆ Q/Q: ±1.5% ∆ L/L: ±0.5% ∆ Q/Q: ±1.6% ∆ L/L: ±0.7% ∆ Q/Q: ±1.2% ∆ L/L: ±0.4% ∆ Q/Q: ±1.3% 260°C ± 5°C, 10s ± 1s Test Method Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Rapid Change of Temperature -40°C (30min.)/ +125°C (30min.) 100 cycles Low Temperature Exposure inductors -40°C ± 3°C, 1000h High Temperature Exposure 125°C ± 2°C, 1000h Moisture Exposure Without distinct damage in appearance and construction ∆ L/L: ±0.4% Insulation resistance: 50MΩ or more ∆ Q/Q: ±1.4% ∆ L/L: ±2%, ∆ Q/Q: ±20% Without distinct damage in ∆ L/L: ±0.6% appearance, construction and marking ∆ Q/Q: ±1.2% ∆ L/L: ±2%, ∆ Q/Q: ±20% 40°C ± 2°C, 90%~95%RH, 1000h Resistance to Solvent Immerse the inductors for 30s ± 5s in the reagent (20°C ~ 25°C) of JIS K8839 (1995) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/07/09 216 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com