MRGF16DTST102G

1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 74 MRGF16 resistors mini flat package type thick film resistor networks EU features • Max. 15 resistor elements can be built in with a 1.27mm terminal pitch • Low profile: 2.2mm or lower • Suitable for both reflow and flow solderings • Improved mechanical strength and reliability by molding structure • Marking: Black body color • Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC dimensions and construction L P Resistive Film Ceramic Substrate D W F C Terminal Inner Molded Electrode Resin Size Code MRGF16 A .433±.008 (11.0±0.2) B .303±.008 (7.70±0.2) C .224±.008 (5.70±0.2) D .039±.004 (1.00±0.1) Dimensions inches (mm) E F G .087 Max. (2.2 Max.) .050±.004 (1.27±0.1) .006±.002 (0.15±0.05) I .001 Min. (0.3 Min.) T .006±.008 (0.15±0.02) P .350±.008 (8.89±0.2) W .016±.002 (0.4±0.05) E T I G B applications • Damping resistors and pull-up/pull-down resistors for digital circuits circuit schematic 16 9 16 9 16 9 1 8 1 8 1 8 X: 16 pins D: 16 pins W: 16 pins ordering information New Part # MRGF16 Type W Package Symbol X W D T Termination Material T: Sn TEB Packaging TEB: Embossed plastic ST: Stick 102 Nominal Resistance 3 digits J Resistance Tolerance G: ±2% J: ±5% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/13/09 76 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 75 MRGF16 mini flat package type thick film resistor networks applications and ratings Part Designation MRGF16X MRGF16D MRGF16W 0.031 0.063 0.5 Power Rating @ 70°C Power Rating w/Package Resistance Range E24 22Ω - 2.2MΩ Resistance Tolerance T.C.R. (ppm/°C) Maximum Working Voltage Maximum Overload Voltage Rated Operating Ambient Temperature Temperature Range resistors G: ±2% J: ±5% ±200 50V 100V +70°C -55°C to +125°C environmental applications Derating Curve 100 80 % Rated Power 60 40 20 0 -60 -40 -20 -55 0 80 100 120 140 70 125 Ambient Temperature (°C) 20 40 60 160 Performance Characteristics Parameter Resistance T.C.R. Short Time Overload Resistance to Soldering Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Maximum ∆ R ± (%+0.05Ω) Within specified tolerance Within specified T.C.R. ±0.5% ±0.5% ±0.5% 2 2 3 25°C Test Method +25°C/-55°C and +25°C/+125°C Rated voltage times 2.5 or Max. overload volume whichever is lower, for 5 seconds 260°C±5°C, 10 seconds ±0.5 second -55°C (30 min.)/+125°C (30 min.) 5 cycles 40°C±2°C, 90%~95% RH, 100h 1.5h ON/0.5h OFF cycle 70°C±3°C, 1000h 1.5h ON/0.5h OFF cycle 125°C±3°C, 1000h Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/16/04 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 77