MRPL03EAD

1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 70 MRP resistors precision metal film resistor SIP network EU features • • • • • • Custom design network Ultra-precision performance for precision analog circuits Tolerance to ±0.1%, matching to 0.05% T.C.R. to ±25ppm/°C, tracking to 2ppm/°C Marking: Black body color with white marking Products with lead-free terminations meet EU RoHS requirements dimensions and construction L D Type h .01±.02 (0.25±0.5) MRPL03 MRPA03 H P P x No. of Pins L (max.) .335 (8.5) Dimensions inches (mm) D (max.) P H .098 (2.5) .100±.008 (2.54±0.2) .118±.02 (3.0±0.5) h (max.) .256 (6.5) .335 (8.5) ordering information New Part # MRP Type L03 Size L03 A03 E T.C.R. (ppm/˚C) E: ±25 C: ±50 A T.C.R. Tracking A: 2 Y: 5 T: 10 D Termination Material D: SnAgCu 103/103 Resistance Value 3 significant figures/ 3 significant figures B Tolerance B: ±0.1% C: ±0.25% D: ±0.5% F: ±1.0% A Tolerance Ratio E: 0.025% A: 0.05% B: 0.1% C: 0.25% D: 0.5% custom circuit ordering information New Part # MRP Type KxxxxD Custom Code Factory will assign applications and ratings Ratings Type Power Rating (mW) Element MRPL03 Package Absolute T.C.R. T.C.R. Tracking Resistance Resistance Range* Tolerance Maximum Working Voltage Maximum Overload Voltage Rated Operating Ambient Temperature Temperature Range A: 2 B: ±0.1% (R1/R2≤10) C: ±0.25% -55°C to 100 200 +70°C 50-100k 100V 200V Y: 5 D: ±0.5% +125°C MRPA03 T: 10 F: ±1% * Resistance combination for R1, R2 is standardized to 200/20k, 1k/1k, 1k/2k, 1k/4k, 1k/9k, 1k/10k, 1k/20k, 10k/10k, 10k/100k, 50k/50k, 100k/100k E: ±25 C: ±50 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/14/08 72 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 71 PMS 300 neg. Black neg. MRP precision metal film resistor SIP network applications and ratings (cont.) Resistance Range Resistance Ratio Tolerance 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 100 max. E: 0.025% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 100 max. A: 0.025% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 150 max. B: 0.1% C: 0.25% 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 150 max. ––– D: 0.5% ––– 50Ω - 100kΩ 50Ω - 100kΩ 150 max. ––– resistors B: ±0.1% Absolute Resistance Tolerance C: ±0.25% D: ±0.5% F: ±1% R1/R2 Relative Resistance Ratio standard circuit schematic R1 R2 custom circuit schematics X W V Z environmental applications Derating Curve 100 (Examples only. Contact factory for other custom layout requests.) 80 % Rated Power SOP Package 60 40 20 0 -60 -40 -55 * Contact factory for SOP requests -20 0 20 40 60 80 70 Ambient Temperature (°C) 100 120 140 125 Performance Characteristics Parameter Rapid Change of Temperature Short Time Overload Dielectric Withstanding Voltage Resistance to Solder Heat Insulation Resistance Solvent Resistance Moisture Resistance Load Life ±(0.05% + 0.05Ω) ±(0.1% + 0.05Ω) ≥10,000MΩ No abnormality Requirement ±(0.1% + 0.05Ω) Test Method -55°C/30 min., room temp./2-3 min., +125°C/30 min., room temp/2-3 min., 5 cycles Rated voltage x 2.5 or max. overload voltage, whichever is less, 5 seconds AC 500V for 1 minute +350°C for 3.5 seconds DC 500V for 1 minute 2-propanol, +20°C to +25°C for 180 seconds 40°C, 90 - 95% RH, 1000 hours, rated voltage DC, 1.5 hr ON, 0.5 hr OFF cycle 70°C, 1000 hours, rated voltage DC, 1.5 hr ON, 0.5 hr OFF cycle ±(0.1% + 0.05Ω) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/22/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 73