SS-01 R5 RCR
6/21/07
9:37 AM
Page 1
KOA SPEER ELECTRONICS, INC.
SS-01 R5
AHA 6/20/07
Fixed Resistors
Type RCR16, RCR25, RCR50(+), RCR60, RCR75 and RCR100
1. Scope of Application This specification applies to RCR16, RCR25, RCR50(+), RCR60, RCR75 and RCR100 type coat-insulated fixed surge resistant resistors produced by KOA corporation. 2. Dimensions and Construction
L t D Trimming Line Ceramic Core t d RCR25 l Type RCR16 L .126±.008 (3.2±0.2) .248±.02 (6.3±0.5)
CERTIFIED
CERTIFIED
Values from 1MΩ to 12MΩ are approved to UL 1676, RCR50+ and RCR60 only (discharge path resistor spec, File No. E159326).
Dimensions inches (mm) D d (nom.) C (max.) t (max.) .134 (3.4) .28 (7.1) — — .067 +.008 -.004 (1.7 +0.2 ) -0.1 .098±.02 (2.5±0.5) .138±.016 (3.5±0.4) .157±.02 (4.0±0.5) .236 +.039 -.016 (6.0 +1.0) -0.4 .018 (0.45) .024 (0.6) .028 (0.7) .031 (0.8) .031 (0.8)
l
RCR50 .374±.039 RCR50+ (9.5±1.0) Marking Resistive Film End Cap Lead Wire NEW NEW RCR60 RCR75 .374 +.039 -.004 (9.5 +1.0 ) -0.2 .472±.039 (12±1.0) — — —
.118 (3.0) .118 (3.0) .118 (3.0)
.787 Min. (20.0 Min.)
Flame Retardant Coating C
RCR100 .610±.039 (15.5±1.0)
3. Type Designation The type designation shall be in the following form:
RCR
Type
RCR RCR50+
50
Power Rating
16: 0.25W 25: 0.25W 50: 0.5W 60: 1W NEW 75: 2W NEW 100: 3W
C
Termination Material
C: SnCu (Other termination styles available, contact factory
for options)
T52
Taping and Forming
RCR16: T26, T52 RCR25: T26, T52 RCR50(+): T52 RCR60: T52 RCR75: T52 RCR100: T521, T631
A
Packaging
A: Ammo R: Reel
105
Nominal Resistance
2 significant figures + 1 multiplier for ±5% 3 significant figures + 1 multiplier for ±1%
J
Tolerance
F: ±1% J: ±5%
PAGE 1 OF 4
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-01 R5 RCR
6/21/07
9:37 AM
Page 2
KOA SPEER ELECTRONICS, INC.
SS-01 R5
4. Standard Applications
Part Designation RCR16 RCR25 RCR50 RCR50+ RCR60 NEW RCR75 RCR100 1.0W 2.0W 3.0W 1000V 0.25W Power Rating @ 70°C Minimum Dielectric Withstanding Voltage 300V Resistance Range E-96 (F±1%) 100kΩ - 1MΩ Resistance Range E-24 (J±5%) 100kΩ - 5.1MΩ 100kΩ - 33MΩ 3.3Ω - 910kΩ 0.5W 700V — 13MΩ - 33MΩ 1MΩ - 12MΩ 100kΩ - 56MΩ 100kΩ - 100MΩ 470kΩ - 33MΩ 4000V 5000V 5000V 2000V 2500V -55°C to +155°C Absolute Maximum Working Voltage 500V DC 1600V AC 1150V Absolute Maximum Overload Voltage 1000V DC 2000V AC 1500V Operating Temperature Range
5. Derating Curve
100 80 % Rated Power 60 40 20 0 -60 -40 -20 -55
Notice of Surge Load
Surge withstanding load voltage for the resistors cannot be guarantee when the undermentioned 4 items get to a remarkable overload in comparison with the conditions shown by surge withstanding voltage in Anti-surge characteristics. Please contact KOA in advance if such a case is anticipated. 1. Peck voltage to be applied 2. Pulse width 3. Conditions of protecting insulation around the resistor 4. Situation of proximity conductivity object For example: In the figure, a metal wire is placed less than 5mm away from the resistor body, there is such a case that causes an electric discharge by a surge load 10kV and then destroys the outer coating.
10kV
0
80 100 120 140 160 70 155 Ambient Temperature (°C) 40 60
20
Discharge
About 5mm Metal Wire
6. Markings on Resistor
Resistors shall be coded with color bands in accordance with JIS C 0802. The first and the second color bands shall show 2 effective numbers, the third band shall show a multiplier of 10, the fourth band shall show resistance tolerance, and the fifth band “green” shall show UL1676 approval (on RCR50 values from 1MΩ to 12MΩ).
PAGE 2 OF 4
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-01 R5 RCR
6/21/07
9:37 AM
Page 3
KOA SPEER ELECTRONICS, INC.
SS-01 R5
7. Performance Characteristics
Parameter Resistance Type RCR16 RCR25 RCR50 (+) RCR60 RCR75 RCR100 Overload Requirement Δ R ±(% + 0.05Ω) Limit Within regulated tolerance T.C.R. Resistance Range ±200ppm/°C 100kΩ - 5.1MΩ ±350ppm/°C 100kΩ - 33MΩ ±500ppm/°C 3.3Ω - 91kΩ ±350ppm/°C 100kΩ - 33MΩ ±350ppm/°C 100kΩ - 56MΩ ±350ppm/°C 100kΩ - 100MΩ ±350ppm/°C 470kΩ - 33MΩ 1 Typical — Test Method Measuring points are 10mm ± 1mm from the end cap
T.C.R.
—
Room temperature/100°C up
0.5
Rated voltage x 2.5 or maximum overload voltage for 5 seconds, whichever is less 260°C ± 5°C, 10 seconds ± 1 second or 350°C ± 10°C, 3.5 seconds ± 0.5 seconds Twist 360°, 5 times -55°C (30 minutes)/+155°C (30 minutes), 5 cycles 40°C ± 2°C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Isopropyl alcohol with ultrasonic washing, 2 minutes Power: 0.3W/cm 2, f: 28kHz, Temperature: 35°C ± 5°C Discharge test: 2kV - 10kV, 0.01µF capacitor discharge pulse, 10 times (1 pulse/5 seconds maximum) RCR60, RCR75, RCR100
Resistance to Solder Heat Terminal Strength Rapid Change of Temperature Moisture Resistance Endurance @ 70°C Resistance to Solvent
1 No mechanical damage 1 5 5 No visible damage to protective coating and marking
0.5 — 0.5 2.5 2.5 —
Surge Withstanding
10
2.5
Type
RCR16 RCR25
Applied Voltage
2kV
3kV
RCR50, RCR50+ 3.3Ω - 6.2Ω: 10kV 6.8Ω - 10Ω: 7kV 10kV 11Ω - 9.1kΩ: 5kV 10kΩ - 91kΩ: 7kV 100kΩ - 33MΩ: 10kV
EN60065 Test (RCR60 only)
20
—
Discharge test: 10kV, 1000pF capacitor discharge pulse, 50 times (1 pulse/5 seconds maximum)
PAGE 3 OF 4
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
SS-01 R5 RCR
6/21/07
9:37 AM
Page 4
KOA SPEER ELECTRONICS, INC.
SS-01 R5
9. Package 9-1 Package RCR16 RCR25 9-2 Forming T25A: 5,000 pieces/box T52A: 3,000 pieces/box T25A: 2,000 pieces/box T52A: 2,000 pieces/box T52R: 5,000 pieces/reel T52A: 2,000 pieces/box T52R: 3,000 pieces/reel T52A: 2,000 pieces/box T52: 1,000 pieces/box T521: 500 pieces/box T631: 1,000 pieces/box RCR16 RCR25 RCR50 RCR60 RCR100 Type M-5 M-10 M-15 M-15 M-20
RCR50(+) RCR60 RCR75 RCR100
10. Markings Marking items for box and tape and reel packaging are as follows:
1 3 5
Product name Resistance tolerance Lot number
2 4 6
Nominal resistance Quantity Manufacturer’s name
PAGE 4 OF 4
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.