RK73B1FRTTBL333J

resistors RK73-RT flat chip resistors (anti-sulfuration) EU features • Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material • Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film • High stability and high reliability with the triple-layer structure of electrode • Suitable for both flow and reflow • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Tested: 0201 (1H), 0402 (1E), 0603 (1J), 0805 (2A), 1206 (2B), 1210 (2E), 2010 (W2H), 2512 (W3A) dimensions and construction L c Type L 1F (01005) .016±.001 (0.4±0.02) .008±.001 (0.2±0.02) .004±.001 (0.1±0.03) .004±.001 (0.11±0.03) 1H (0201) .024±.001 (0.6±0.03) .012±.001 (0.3±0.03) .004±.002 (0.1±0.05) .006±.002 .009±.001 (0.15±0.05) (0.23±0.03) 1E (0402) .039 +.004 -.002 +0.1 ) -0.05 .02±.002 (0.5±0.05) .008±.004 (0.2±0.1) +.002 -.004 (0.25 +0.05 -0.1 ) .014±.002 (0.35±0.05) 1J (0603) .063±.008 (1.6±0.2) .031±.004 (0.8±0.1) .012±.004 (0.3±0.1) .012±.004 (0.3±0.1) .018±.004 (0.45±0.1) 2A (0805) .079±.008 (2.0±0.2) .049±.004 (1.25±0.1) .016±.008 (0.4±0.2) .012 c W Sn Plating Ni Plating t d Protective Coating Dimensions inches (mm) W c d (Inch Size Code) Resistive Inner Film Electrode Ceramic Substrate 2B (1206) 2E (1210) 1 (1.0 .126±.008 (3.2±0.2) .063±.008 (1.6±0.2) .197±.008 (5.0±0.2) .098±.008 (2.5±0.2) W3A/ W3A21 (2512) .248±.008 (6.3±0.2) .122±.008 (3.1±0.2) (0.3 .016 (0.4 .102±.008 (2.6±0.2) W2H (2010) .01 .02±.012 (0.5±0.3) +.008 -.004 +0.2 ) -0.1 t .005±.001 (0.13±0.02) .02±.004 (0.5±0.1) +.008 -.004 +0.2 ) -0.1 .026±.006 (0.65±0.15) .024±.004 (0.6±0.1) RK73Z exempt ordering information RK73H Type RK73B RK73H RK73Z 2A Power Rating 1F 1H 1E 1J 2A 2B 2E W2H W3A W3A2 R Characteristic R: Anti-Sulfur T TD Termination Material T: Sn Packaging TX: 4mm width - 1mm pitch plastic embossed TBL - TCM: 2mm pitch press paper *2 TPL - TP: 2mm pitch punch paper TD: 4mm pitch punch paper TE: 4mm pitch plastic embossed For further information on packaging, please refer to Appendix A 2 1002 F Nominal Resistance RK73B: 3 digits RK73H: 4 digits RK73Z: None Resistance Tolerance D: ±0.5% F: ±1% G: ±2% J: ±5% Standard taping specification of 1H is TCM. Previously available “TC (10,000pcs/Reel)” is not recommended for new designs. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 50 5/17/23 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com flat chip resistors (anti-sulfuration) applications and ratings RK73B/RK73H Part Designation 1F 1H 1E 1J 2A 2B Rated Rated T.C.R. Terminal Power (ppm/°C) Ambient Part Rating Max. Temp. Temp. ±200 ±250 –– 0.03W 0 - +300 ±200 0.05W ±300 ±100 0.1W ±200 ±100 0.1W ±200 ±100 0.125W ±200 ±100 125°C 70°C 0.25W ±200 ±100 0.25W ±200 2E 0.5W W2H 0.75W W3A 1W W3A2 2W4 Resistance Range Maximum Maximum Operating RK73H RK73B Working Overload Temp. D±0.5% G±2% J±5% F±1% Voltage Voltage Range 3 E24, E96 E24 E24 E24, E96 100kΩ - 2MΩ2 100kΩ - 1MΩ 100kΩ - 10MΩ -55°C to –– 10Ω - 91kΩ2 10Ω - 91kΩ 10Ω - 91kΩ 20V 30V +125°C 1Ω - 9.1Ω 1Ω - 9.1Ω –– 100 - 1M 100Ω - 100kΩ 100Ω - 1MΩ 25V 50V –– –– 10Ω - 91Ω 10Ω - 97.6Ω — — 100Ω - 1MΩ 10Ω - 1MΩ –– 1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ 1.02kΩ - 1MΩ 1.02kΩ - 1MΩ — — 75V 100V –– 1.02MΩ - 10MΩ 1.1kΩ - 10MΩ 1.1kΩ - 10MΩ — — 100Ω - 1kΩ 10Ω - 1kΩ 10Ω - 1kΩ 1Ω - 1kΩ –– –– 100Ω - 1MΩ 10Ω - 1MΩ — — 150V 200V — 1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ -55°C 100Ω - 1MΩ 10Ω - 1MΩ — — to — 1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ +155°C 100Ω - 1MΩ 10Ω - 1MΩ — — — — 10Ω - 1MΩ 1Ω - 1MΩ 10Ω - 1MΩ 10Ω - 1MΩ — — 1 - 9.76 200V 400V — 1.02MΩ - 10MΩ 1Ω - 10MΩ 1Ω - 10MΩ 10Ω - 1MΩ 10Ω - 1MΩ — — ±100 ±200 ±100 ±200 95°C ±100 ±200 ±100 ±200 — 1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ 10Ω - 1MΩ 10Ω - 1MΩ — — — 1.02MΩ - 10MΩ 10Ω - 10MΩ 1Ω - 10MΩ Rated voltage = √Power rating x resistance value or max. working voltage, whichever is lower The nominal resistance value for RK73H1F (F:±1%) is E24 If you use at the rated power, please keep the condition that the terminal of the resistor is below the rated terminal part temperature. Please refer to the derating curves based on the terminal temperature. If any questions arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” in your usage conditions, please give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves in the terminal part temperature” in the beginning of the catalog. While using under high power, the temperature of the product may increase depending on the condition of heat dissipation from PCB. Be sure to check the terminal part temperature as well as precautions to use on delivery specification before use. 3 4 Derating Curve 80 1F 1H, 1E, 1J, 2A, 2B, 2E, W2H, W3A (1W), W3A2 (2W) 60 40 20 0 -60 -40 -55 -20 0 20 40 60 80 70 Ambient Temperature (°C) 100 120 140 125 155 For resistors operated at an ambient temperature of 70℃ or higher, the power (for RK73B, RK73H) or a current rating (for RK73Z) shall be derated in accordance with the above derating curve. 100 100 80 80 1H, 1E, 1J, 2A, 2B, 2E, W2H, W3A (1W) 60 40 60 40 20 20 0 -60 -40 -55 % Rated Power 100 RK73B-RK73H-RT Terminal Part Temperature W3A2 RK73B-RK73H-RK73Z-RT Terminal Part Temperature % Rated Power for RK73B, RK73H % Rated Current for RK73Z % Rated Power for RK73B, RK73H % Rated Current for RK73Z RK73B-RK73H-RK73Z-RT Ambient Temperature -20 0 100 120 140 160 125 155 Terminal Part Temperature (°C) 20 40 60 80 0 -60 -40 -55 -20 0 20 40 60 80 100 120 140 160 95 155 Terminal Part Temperature (°C) When the terminal part temperature of the resistor exceeds the rated terminal part temperature shown above, the power shall be derated according to the derating curve. Please refer to “Introduction of the derating curves based on the terminal part temperature” on the beginning of our catalog before use. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 5/17/23 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 51 resistors RK73-RT resistors RK73-RT flat chip resistors (anti-sulfuration) applications and ratings (continued) RK73Z Part Designation Rated Ambient Temperature Rated Terminal Part Temperature 1H 1E 1J 2A 2B 2E W2H +70°C Resistance Current Rating Maximum Surge Current 100mΩ max. 0.5A 1A 1A 2A 5A +125°C 50mΩ max. 2A Operating Temperature Range -55°C to +155°C 10A W3A environmental applications Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) RK73H, RK73B Requirement Δ R ±(%+0.1Ω) Limit Typical Within specified — tolerance Within specified — T.C.R. ±2% RK73Z Requirement Limit Test Method Typical R≤100mΩ: 1H R≤90mΩ: 1H R≤50mΩ: All others R≤40mΩ: All others 25°C — — +25°C/-55°C and +25°C/+125°C RK73B, RK73H Rated Voltage x 2.5 for 5 seconds R≤100mΩ: 1H R≤90mΩ: 1H ±1%: 1F (1E, 2B, W3A2: Rated Voltage x 2 for 5 seconds) ±0.8%: All others R≤50mΩ: All others R≤40mΩ: All others RK73Z: Max. overload current for 5 seconds Resistance to Solder Heat ±1%:10Ω≤R≤1MΩ ±1%: R1MΩ ±0.5%: All others Rapid Change of Temperature ±1%: 1F ±0.5%: All others Moisture Resistance ±2%: 1J, 2A, 2B ±3%: All others Endurance at 70°C ±2%: 1J, 2A, 2B ±3%: All others High Temperature Exposure ±1% Sulfuration Test ±5% R≤100mΩ: 1H R≤90mΩ: 1H ±0.5%: 1F ±0.3%: All others R≤50mΩ: All others R≤40mΩ: All others -55°C (30 minutes), +125°C (30 minutes), 100 cycles ±0.75%: 1J, 2A, 2B R≤150mΩ: 1H R≤100mΩ: 1H 40°C ± 2°C, 90%-95% RH, 1000 hours, ±1.5%: 1F R≤100mΩ: All others R≤50mΩ: All others 1.5 hr ON, 0.5 hr OFF cycle ±1%: All others R≤150mΩ: 1H R≤100mΩ: 1H ±0.75%: 1J, 2A, 2B ±1%: All others R≤100mΩ: All others R≤50mΩ: All others 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle R≤150mΩ: 1H R≤100mΩ: 1H +125°C, 1000 hours: 1F; +155°C, 1000 hours: ±0.5% R≤100mΩ: All others R≤50mΩ: All others 1H, 1E, 1J, 2A, 2B, 2E, W2H, W3A R≤100mΩ: 1H ±0.3%: 1F, 1H Soaked in industrial oil with 3.5% sulfur R≤150mΩ: 1H ±0.2%: All others R≤100mΩ: All others R≤50mΩ: All others concentration 105°C ± 3°C, 500 hours Please refer to conventional products for characteristic data such as temperature rise. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 52 11/06/19 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com