SG731JTTD332M

anti-surge thick film chip resistor EU features • Superior to RK73B/RK73H series in surge/pulse withstanding voltage • Untrimmed, superior surge/pulse and ESD withstanding • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Tested: 0603(1J), 0805(2A), 1206(2B), 1210(2E), 2010(2H/W2H), 2512(3A/W3A) dimensions and construction L c Type c (Inch Size Code) SG731J (0603) W Sn Plating Ni Plating t Protective Coating d Resistive Inner Film Electrode Ceramic Substrate % Rated Power 80 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the derating curve. 60 40 20 0 -60 -40 -20 -55 0 20 40 60 80 100 120 140 70 Ambient Temperature (°C) 100 .063±.008 .126±.008 (1.6±0.2) (3.2±0.2) .102±.008 (2.6±0.2) 160 155 SG733A (2512) SG73W3A (2512) (0.3 .02±.012 (0.5±0.3) .016 .02±.012 (0.5±0.3) .197±.008 .098±.008 (5.0±0.2) (2.5±0.2) .248±.008 .122±.008 (6.3±0.2) (3.1±0.2) .012 .02±.012 (0.5±0.3) (0.4 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) +.008 -.004 +0.2 ) -0.1 .026±.006 .024±.004 (0.65±0.15) (0.6±0.1) .016 (0.4 +.008 -.004 +0.2 ) -0.1 .026±.006 (0.65±0.15) 1J, 2A, 2B, 2E, W2H, W3A 80 % Rated Power SG732B (1206) SG73W2H (2010) t .063±.008 .031±.004 .012±.004 .012±.004 .018±.004 (1.6±0.2) (0.8±0.1) (0.3±0.1) (0.3±0.1) (0.45±0.1) .079±.008 .049±.004 .016±.008 (2.0±0.2) (1.25±0.1) (0.4±0.2) SG732H (2010) 100 Dimensions inches (mm) W c d SG732A (0805) SG732E (1210) Derating Curve L For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. 60 40 20 0 -60 -40 -20 -55 0 20 40 60 80 100 120 140 160 125 155 Terminal Part Temperature (°C) ordering information SG73 2B T TD 102 K Type Size Termination Material Packaging Nominal Resistance Tolerance SG73 1J 2A 2B 2E W2H W3A 2H 3A T: Sn L: SnPb: (NOT available in SG73W2H, SG73W3A) TP: 0603, 0805: 7" 2mm pitch punch paper TD: 0603, 0805, 1206, 1210: 7" 4mm pitch punched paper TE: 0805, 1206, 1210, 2010 & 2512: 7" 4mm embossed plastic For further information on packaging, please refer to Appendix A K: ±10% M: ±20% ±10%, ±20%: 2 significant figures + 1 multiplier “R” indicates decimal on value