SG732ETTD3R3M

anti-surge thick film chip resistor EU features • Superior to RK73B/RK73H series in surge/pulse withstanding voltage • Untrimmed, superior surge/pulse and ESD withstanding • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Tested: 0603(1J), 0805(2A), 1206(2B), 1210(2E), 2010(2H/W2H), 2512(3A/W3A) dimensions and construction L c Type c SG731J (0603) Sn Plating Ni Plating Protective Coating d Resistive Inner Film Electrode Ceramic Substrate SG732A (0805) .016±.008 (0.4±0.2) % Rated Power 80 For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the derating curve. 60 40 20 0 -60 -40 -20 -55 0 20 40 60 80 100 120 140 70 Ambient Temperature (°C) 160 155 100 1J, 2A, 2B, 2E, W2H, W3A % Rated Power 80 60 40 20 0 -60 -40 -20 -55 0 20 40 .079±.008 .049±.004 (2.0±0.2) (1.25±0.1) SG732B (1206) 100 60 80 100 120 140 160 125 155 Terminal Part Temperature (°C) For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. t SG731J AT (0603) SG732A AT (0805) Derating Curve Dimensions inches (mm) W c d .012±.004 .012±.004 (0.3±0.1) .018±.004 .063±.008 .031±.004 (0.3±0.1) (1.6±0.2) (0.8±0.1) .014±.006 .02±.008 (0.45±0.1) (0.35±0.15) (0.5±0.2) W t L (Inch Size Code) SG732B AT .126±.008 (1206) (3.2±0.2) SG732E (1210) SG732H (2010) SG73W2H (2010) SG733A (2512) .102±.008 (2.6±0.2) (0.3 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) .018±.010 .024±.008 .022±.004 (0.45±0.25) (0.6±0.2) (0.55±0.1) .02±.012 (0.5±0.3) .063±.008 (1.6±0.2) .012 .016 (0.4 +.008 -.004 +0.2 ) -0.1 .022±.014 .031±.008 (0.55±0.35) (0.8±0.2) .02±.012 (0.5±0.3) .016 (0.4 .197±.008 .098±.008 (5.0±0.2) (2.5±0.2) .02±.012 (0.5±0.3) .248±.008 .122±.008 (6.3±0.2) (3.1±0.2) .024±.004 (0.6±0.1) .026±.006 (0.65±0.15) .016 (0.4 SG73W3A (2512) +.008 -.004 +0.2 ) -0.1 +.008 -.004 +0.2 ) -0.1 .026±.006 (0.65±0.15) ordering information SG73 2B Type Size Characteristics SG73 1J 2A 2B 2E W2H W3A 2H 3A Nil: Standard New A: Heat shock resistance *1 T TD 102 K Termination Material Packaging Nominal Resistance Tolerance T: Sn (L: Sn/Pb*2) *1 With type A, only T is available as the terminal surface material. *2 With SG73 W2H, W3A only the symbol T is available as the terminal surface material. TP: 0603, 0805: 7" 2mm pitch punch paper TD: 0603, 0805, 1206, 1210: 7" 4mm pitch punched paper TE: 0805, 1206, 1210, 2010 & 2512: 7" 4mm embossed plastic K: ±10% M: ±20% ±10%, ±20%: 2 significant figures + 1 multiplier “R” indicates decimal on value