SG73P1JTTD244J

anti-surge endured pulse power thick film chip resistor EU features • Superior to RK73B/RK73H series in pulse withstanding voltage and high power • Down to ±0.5% tolerance • Suitable for both reflow and flow solderings • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Tested Type dimensions and construction L c c W Protective Coating d Resistive Inner Film Electrode SG73P2A (0805) Derating Curve For resistors operated at an 1 ambient temperature of 70°C or above, a power rating shall be derated in accordance with the derating curve. 100 % Rated Power 80 60 +.004 -.002 +0.1) (1.0-0.05 .039 40 20 60 80 100 120 70 Ambient Temperature (°C) 20 40 100 140 SG73P2A AT (0805) .079±.008 .049±.004 (2.0±0.2) (1.25±0.1) 1E/0.125W (125°C) 1EW/0.25W (125°C) 2A/0.25W (125°C) 2B/0.33W (125°C) 2E/0.5W (125°C) 80 60 1J/0.2W (135°C) 40 100 2E1/1W (95°C) 2A/0.5W (100°C) 1E/0.2W, 2B/0.75W (105°C) 2E/0.75W (110°C) 1J/0.33W (125°C) 80 60 40 (0.3 .063±.008 (1.6±0.2) .102±.008 (2.6±0.2) +.008 -.004 +0.2 ) -0.1 .012 (0.3 +.008 -.004 +0.2 ) -0.1 .02±.004 (0.5±0.1) .018±.010 .024±.008 .022±.004 (0.45±0.25) (0.6±0.2) (0.55±0.1) .016 SG73P2B (1206) SG73P2E SG73P2E1 (1210) 160 155 % Rated Power 0 .014±.002 (0.35±0.05) +.002 .02±.002 .006±.004 .010 -.004 .014±.002 (0.5±0.05) (0.15±0.1) (0.25 +0.05) (0.35±0.05) -0.1 .012 SG73P2B AT .126±.008 (1206) (3.2±0.2) 0 -60 -40 -20 -55 .02±.002 .006±.004 (0.5±0.05) (0.15±0.1) t .010 +.002 -.004 +0.05 (0.25 -0.1 ) .012±.004 .012±.004 (0.3±0.1) .018±.004 .063±.008 .031±.004 (0.3±0.1) (0.8±0.1) .014±.006 .02±.008 (0.45±0.1) SG73P1J AT (1.6±0.2) (0603) (0.35±0.15) (0.5±0.2) Ceramic Substrate % Rated Power SG73P1E (0402) .039 +.004 -.002 +0.1) (1.0-0.05 SG73P1J (0603) Ni Plating t L SG73P1EW (0402) Sn Plating Dimensions inches (mm) W c d (Inch Size Code) (0.4 +.008 -.004 +0.2 ) -0.1 .016 (0.4 +.008 -.004 +0.2 ) -0.1 .022±.014 .031±.008 .024±.004 (0.6±0.1) (0.55±0.35) (0.8±0.2) .016 (0.4 +.008 -.004 +0.2 ) -0.1 .016 (0.4 +.008 -.004 +0.2 ) -0.1 For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. If you want to use the rated power of *2, *3, please use the derating curve based on the terminal part temperature on the right hand side. 20 20 0 -60 -40 -20 -55 0 20 40 60 80 140 160 100 120 125 135 155 0 -60 -40 -20 -55 Terminal Part Temperature (°C) 0 20 40 60 80 100 120 140 160 95 105 110 125 155 Terminal Part Temperature (°C) ordering information SG73P 2B Type Size Characterisitic SG73P 1E 1EW 1J 2A 2B 2E 2E1 Nil: Standard New A: Heat shock resistance *1 T TD 1001 F Termination Material Packaging Nominal Resistance Tolerance T: Sn *1 With type A, only T is available as the terminal surface material. TP: 0402, 0603, 0805: 7" 2mm pitch punch paper TD: 0603, 0805, 1206, 1210: 7" 4mm pitch punched paper TE: 0805, 1206, 1210: 7" 4mm embossed plastic Contact us when you have control request for environmental hazardous material other than the substance specified by EU RoHS. D: F: G: J: ±0.5%, ±1%: 3 significant figures + 1 multiplier “R” indicates decimal on value