SR731JRTTD1R00F

resistors SR73-RT low resistance flat chip resistors (anti sulfuration) EU features • Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material • Current detecting resistors for power supply, motor circuits, etc • High reliability and performance with resistance tolerance ±1.0, T.C.R. ±100×10-6/K • Suitable for both reflow and flow solderings • Products with lead free termination meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. • AEC-Q200 Tested Type (Inch Size Code) dimensions and construction 1E (0402) Resistance Range (Ω) 1 - 10 Dimensions inches (mm) W c d L .039 +.004 -.002 +0.1) (1.0 -0.05 .020 .008±.004 (0.2±0.1) .063±.008 (1.6±0.2) .031 +.006 -.004 +0.15 -0.1 ) (0.35 +0.15 -0.1 ) +0.2) (0.35 -0.1 .014±.004 (0.35±0.1) .014±.004 (0.35±0.1) .014 L c 0.1 - 0.43 c 1J (0603) 0.47 - 10 W (0.8 +.006 -.004 .049±.004 (1.25±0.1) .016±.008 (0.4±0.2) 0.47 - 10 Ni Plating t .079±.008 (2.0±0.2) 2A (0805) .010±.004 .014±.002 (0.25±0.1) (0.35±0.05) .014 +.008 -.004 +0.2 (0.4 -0.1 ) .012 +.008 -.004 (0.3 +0.2 -0.1 ) .02 d Protective Coating Resistive Inner Film Electrode 0.1 - 0.43 2B (1206) Ceramic Substrate .126±.008 (3.2±0.2) .063±.008 (1.6±0.2) .02±.012 (0.5±0.3) .126±.008 (3.2±0.2) .102±.008 (2.6±0.2) .02±.012 (0.5±0.3) 0.47 - 10 0.1 - 0.39 2E (1210) 0.43 - 10 Derating Curve .018±.004 (0.45±0.1) +.008 -.004 (0.5 +0.2 -0.1 ) +.008 -.004 +0.2 (0.4 -0.1 ) .02 +.008 -.004 (0.5 +0.2 ) -0.1 .016 +.008 -.004 (0.4 +0.2 -0.1 ) .016 .02±.004 (0.5±0.1) .024±.004 (0.6±0.1) .024±.004 (0.6±0.1) SR73 2A (0.5W), SR73 2B (0.5W), SR73 2E (0.66W) For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the derating curve. ordering information SR73 2B Type Size 1E: 0.166W 1J: 0.2W 2A: 0.33W, 0.5W 2B: 0.33W, 0.5W 2E: 0.5W, 0.66W RT Termination Material RT: Sn Anti-Sulfur For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. TD Packaging TD: 7" 4mm pitch punch paper TP: 0402 only, 7" 2mm pitch paper TPL: 0402 only, 2mm pitch paper For further information on packaging, please refer to Appendix A R10 Nominal Resistance ±2%, ±5%: 2 significant figures + 1 multiplier “R” indicates decimal on values