TLR2HWDTE1L00F50

TLR-2BW, 2BP, 2HW, 3AP, 3APS metal plate current sense resistor EU • Ultra-low TCR (+50ppm/°C) available • Ultra low height with a thickness of 0.6mm, suitable for use of small equipment • Ultra low resistances (0.5mΩ~), suitable for large current sensing • Suitable for reflow soldering (Not suitable for flow soldering) • Products with lead-free terminations meet EU RoHS and China RoHS requirements • AEC-Q200 Tested dimensions and construction Protective Top Coating TLR2BW (1mΩ, 1.5mΩ) TLR2BP (1mΩ, 1.5mΩ) TLR3AP (0.5m-1.5mΩ) TLR3APS (2mΩ) Resistive Element Termination Solder L W t d Size Code d Protective Bottom Coating TLR2BW (0.5m-5mΩ) TLR2BP (0.5m-5mΩ) TLR2HW (1m-3mΩ) TLR3AP (0.5m-1.5mΩ) TLR3APS (2mΩ, 3mΩ) TLR2BW 1mΩ 1.5mΩ .126±.008 (3.20±0.20) .063±.008 (1.60±0.20) 0.5mΩ TLR2BP 1mΩ, 1.5mΩ .126±.008 (3.20±0.20) .063±.008 (1.60±0.20) 2mΩ - 20mΩ 0.5mΩ 1mΩ 1.5mΩ .200±.008 (5.00±0.20) .100±.008 (2.50±0.20) TLR3AP, TLR3APS 7mΩ - 10mΩ 100 100 2BP (11m – 20mΩ) 2BW, 2HW 2BP (0.5m – 10mΩ) 60 40 % Rated Power 80 80 0.5mΩ 60 0.68mΩ, 0.75mΩ, 0.82mΩ 20 40 60 80 100 120 140 160 180 110 170 Terminal Part Temperature (°C) 0 0 -80 1mΩ, 1.5mΩ, 3mΩ, 4mΩ -60 -40 -20 -65 20 40 60 80 100 120 140 160 180 90 110 170 Terminal Part Temperature (°C) 0 For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to “Introduction of the derating curve based in the terminal part temperature” in the beginning of our catalog before use. TLR3AP .028±.008 (0.70±0.20) .043±.008 (1.10±0.20) .020±.008 (0.50±0.20) .024±.008 (0.60±0.20) .049±.008 (1.25±0.20) .043±.008 (1.10±0.20) .020±.008 (0.50±0.20) .028±.008 (0.70±0.20) .075±.008 (1.90±0.20) .028±.008 (0.70±0.20) .25±.01 (6.35±0.25) .125±.01 (3.18±0.25) 5mΩ, 6mΩ, 7mΩ, 8mΩ .024±.008 (0.60±0.20) .087±.01 (2.20±0.25) .024±.01 (0.60±0.25) .098±.01 (2.50±0.25) .047±.01 (1.20±0.25) .030±.01 (0.77±0.25) 9mΩ, 10mΩ 2mΩ, 3mΩ .026±.008 (0.65±0.20) .071±.008 (1.80±0.20) 2mΩ TLR3APS .024±.008 (0.60±0.20) .105±.01 (2.675±0.25) 40 20 20 t .049±.008 (1.25±0.20) .060±.008 (1.50±0.20) .020±.008 (0.50±0.20) .107±.01 (2.725±0.25) 2mΩ - 6mΩ TLR2BW, TLR2BP, TLR2HW % Rated Power Dimensions inches (mm) W d 2mΩ - 20mΩ TLR2HW -60 -40 -20 -65 L 0.5mΩ Derating Curve 0 -80 Resistance .25±.01 (6.35±0.25) .125±.01 (3.18±0.25) .047±.01 (1.20±0.25) .024±.01 (0.60±0.25) ordering information TLR Type 2BW D Power Rating 2BW: 1W 2BP: 1.5W, 3W 2HW: 2W 3AP: 3W, 5W 3APS: 3W Termination Material D: SnAgCu TD Packaging TD: 7" 4mm pitch punched paper TE: 7" 4mm embossed plastic 10L0 Nominal Resistance ±1%: 4 digits All values less than 0.1Ω (100m) are expressed in mW with “L” as decimal Ex: 2mΩ = 2L00 F 75 Tolerance T.C.R. F: ±1% 50: 50ppm/°C 75: 75ppm/°C For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/03/21 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 101 current sense features TLR-2BW, 2BP, 2HW, 3AP, 3APS metal plate current sense resistor applications and ratings Part Designation current sense ±50 TLR2BW 1W ±75 ±50 1.5W ±75 TLR2BP NEW 3W TLR2HW Standard Resistance (Ω) Resistance Tolerance Rated Terminal Part Temperature Operating Temperature Range 2m,3m,4m,5m,6m,7m,8m, 9m,10m,11m,12m,13m, 15m,16m,18m,20m 0.5m,1m,1.5m,2m,3m,4m,5m, 6m,7m,8m,9m,10m,11m,12m, 13m,15m,16m,18m,20m F: ±1% +120°C and less -65°C to +170°C F: ±1% +110°C and less +100°C and less +110°C and less +100°C and less -65°C to +170°C T.C.R. (ppm/°C) Max.** Power Rating 2W 5m,6m,7m,8m,9m,10m 11m,12m,13m,15m,16m,18m,20m 5m,6m,7m,8m,9m,10m 11m,12m,13m,15m,16m,18m,20m ±50 2m,3m,4m ±75 ±50 ±75 0.5m,1m,1.5m,2m,3m,4m F: ±1% +110°C and less -65°C to +170°C 0.5m,1m,1.5m,2m,2.5m,3m, 4m,5m,6m,7m,8m,9m,10m F: ±1% +120°C and less -65°C to +170°C 5m,6m,7m,8m,9m,10m F: ±1% 5m ~ 8m: +110°C and less 9m, 10m: +90°C and less -65°C to +170°C F: ±1% 0.5m~1m, 2m~4m: +110°C and less 1.5m: +90°C and less -65°C to +170°C F: ±1% +110°C and less -65°C to +170°C ±50 3W ±75 TLR3AP 5W TLR3APS 3W ±50 2m,3m,4m ±75 ±50, ±75 0.5m,0.68m,0.75m,0.82m,1m,1.5m,2m,3m,4m 2m,3m environmental applications One-Pulse Limiting Electric Power TLR3AP 1,000,000 100,000 10,000 1,000 100 2H-10mΩ 2H-0.5mΩ 10 2B-0.5mΩ 2B-20mΩ 1 .001 .01 1 .1 Pulse Duration (ms) 10 100 One-Pulse Limiting Electric Power (W) One-Pulse Limiting Electric Power (W) TLR2BW/2BP, TLR2HW 10,000,000 10,000,000 The maximum applicable voltage is equal to the max. overload voltage. Please ask us about the resistance characteristic of continuous applied pulse. The pulse endurance values are not assured values, so be sure to check the products on actual equipment when you use them. 1,000,000 100,000 10,000 1,000 100 10mΩ 10 0.5mΩ 1 .001 .01 .1 1 Pulse Duration (ms) 100 10 Thermal Resistance Size 2BW 2HW TLR Resistance (Ω) 0.5m 20m 0.5m Rth (°C/W) 7.2 116 9 10m 0.5m 10m 61.1 6 62 3AP Rth=(Hs-ts)/Power Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. Please refer to us before use. Resistance T.C.R. Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Biased Humidity T T TL ＋ T＝Hs T TH TM TL Low The temperature of the resistor will increase the same ⊿T from the standard terminal part temperature regardlless of the ambient temperature when the same power is applied. This is because there is hardly any heat dissipation from the resistor surface to the ambient air. High Terminal Part Temperature Performance Characteristics Parameter TH ＋ T＝Hs Terminal Part Temperature TH ：High TM ：Medium ＝ts TL ：Low TM ＋ T＝Hs Temperature Type Requirement ∆ R ±% Limit Typical Within regulated — tolerance Within specified — T.C.R. ±0.5% ±0.3% ±0.5% ±0.3% ±0.5% ±0.1% ±0.5% ±0.1% Endurance of Rated Terminal Part Temperature ±1.0% ±0.3% High Temperature Exposure ±1.0% ±2.0% ±0.6% ±0.8% Test Method 25°C +25°C/+125°C 260°C ± 5°C, 10 ± 2 seconds -55°C (15 minutes), +150°C (15 minutes), 1000 cycles MIL-STD-202-106, 0% power, 7a and 7b not required 85°C ± 2°C, 85% RH, 1000 hours, 10% bias 120°C ± 2°C (2BW, 2HW), 110°C ± 2°C (3AP 0.5m~1mΩ, 2m~8mΩ) 90°C ± 2°C (3AP 1.5mΩ, 9mΩ~10mΩ), 110°C ± 2°C (2BP 0.5mΩ~10mΩ) 100°C±2°C (2BP 11mΩ~20mΩ), 110°C±2°C (3APS 2mΩ, 3mΩ) 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle ±155°C, 1000 hours ±170°C, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 102 4/12/22 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com