TLR3ADTE1L00F

TLR-2B, 2H, 3AW metal plate current sense resistor EU • Ultra low height with a thickness of 0.6mm, suitable for use of small equipment • Excellent high-frequency characteristics • Ultra low resistances (0.5mΩ~), suitable for large current sensing • Suitable for reflow soldering (Not suitable for flow soldering) • Products meet EU RoHS requirements • AEC-Q200 Tested dimensions and construction L Protective Coating (2B (1mΩ, 1.5mΩ), 3AW (0.5mΩ ~1.5mΩ only)) Resistive Element W t TLR2B TLR2BN Termination Solder d Protective Coating Size Code d Resistance 1m 1.5m 2m,3m,4m,5m, 6m,7m,8m,9m, 10m,11m,12m, 13m,15m,16m, 18m,20m L Dimensions inches (mm) W d .126±.008 .063±.008 .024±.008 (3.20±0.20) (1.60±0.20) .020±.008 (0.60±0.20) (0.50±0.20) .071±.008 .026±.008 (1.80±0.20) (0.65±0.20) 1m Derating Curve TLR2H For resistors operated at an ambient temperature of 70°C or above, a power rating shall be 3 derated in accordance with the above derating curve. 100 % Rated Power 80 60 .200±.008 .100±.008 .060±.008 (5.00±0.20) (2.50±0.20) (1.50±0.20) .024±.008 .020±.008 (0.60±0.20) (0.50±0.20) .107±.01 (2.725±0.25) 0.5mΩ 40 0 -80 -60 -40 -20 -65 80 60 40 20 0 -80 -60 -40 -20 -65 TLR3AW 20 40 60 80 100 120 140 160 180 70 170 Ambient Temperature (°C) 0 100 % Rated Power 2m - 6m 7m - 10m 20 0 20 40 60 80 100 120 140 160 180 105 170 Terminal Part Temperature (°C) For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. 3 Please refer to “Introduction of the derating curve based on the terminal part temperature” in the beginning of our catalog before use. t .043±.008 (1.10±0.20) 0.68mΩ,0.75mΩ, 0.82mΩ, 1mΩ, 1.5mΩ, 2mΩ, 3mΩ, 4mΩ .105±.01 (2.675±0.25) .25±.01 .125±.01 .087±.01 .024±.01 (6.35±0.25) (3.18±0.25) (2.20±0.25) (0.60±0.25) 5mΩ, 6mΩ, 7mΩ, 8mΩ .047±.01 (1.20±0.25) 9mΩ, 10mΩ .030±.01 (0.77±0.25) ordering information TLR Type 3AW D Power Rating 2BN: 0.5W 2B: 0.5W 2H: 1W 3AW: 2W Termination Material D: SnAgCu TE Packaging TE: 7" 8mm pitch embossed plastic (3AW) TE: 7" 4mm pitch embossed plastic (2H only) TD: 7" 4mm pitch punched paper (2B/2BN only) 2L00 Nominal Resistance ±1%: 4 digits All values less than 0.1Ω (100m) are expressed in mW with “L” as decimal Ex: 2mΩ = 2L00 F 75 Tolerance T.C.R. F: ±1% 50ppm/°C 75ppm/°C Blank: 150ppm/°C For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/28/22 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 99 current sense features TLR-2B, 2H, 3AW metal plate current sense resistor applications and ratings Part Designation Rated Terminal Part Temperature Rated Ambient Temperature Power Rating current sense ±50 TLR2B 1/2W (.5W) 70°C ±75 105°C ±150 TLR2BN TLR2H 1W 2m,3m,4m,5m,6m,7m,8m, 9m,10m,11m,12m,13m, 15m,16m,18m,20m 1m,1.5m,2m,3m,4m,5m, 6m,7m,8m,9m,10m,11m, 12m,13m,15m,16m,18m,20m 1m,2m,3m,4m,5m, 6m,7m,8m,9m,10m 2m,3m,4m,5m, 6m,7m,8m,9m,10m ±50 TLR3AW 2W 70°C 105°C ±75 ±150 Resistance Tolerance Operating Temperature Range F: ±1% -65°C to +155°C** -65°C to +170°C** F: ±1% -65°C to +155°C** -65°C to +170°C** 1m,1.5m,2m,3m,4m,5m, 6m,7m,8m,10m,11m, 12m,13m,15m,16m,18m,20m ±50 ±75 105°C 70°C Standard Resistance (Ω) T.C.R. (ppm/°C) Max.* F: ±1% 0.5m,0.68m,0.75m,0.82m, 1m,1.5m,2m*,3m,4m, 5m,6m,7m,8m,9m,10m -65°C to +155°C** -65°C to +170°C** * Contact factory for 2mΩ dimensions ** Please reference High Temperature Performance Characteristics in the below table If any questions should arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature,” please give priority to the “Rated Terminal Part Temperature.” Prior to use and for more details refer to “Introduction of the derating curves on the terminal part temperature” in the beginning of the catalog. environmental applications TLR2B/2BN, TLR2H TLR3AW 10,000,000 1,000,000 100,000 10,000 1,000 100 2H-10mΩ 2H-1mΩ 2B-1mΩ 2B-2mΩ 2B-20mΩ 10 1 .001 .01 .1 1 Pulse Duration (ms) 10 100 One-Pulse Limiting Electric Power (W) One-Pulse Limiting Electric Power (W) One-Pulse Limiting Electric Power 10,000,000 Please ask us about the resistance characteristic of continuous applied pulse. The pulse endurance values are not assured values, so be sure to check the products on actual equipment when you use them. 1,000,000 100,000 10,000 1,000 100 10mΩ 10 0.5mΩ 1 .001 .01 .1 1 Pulse Duration (ms) 10 100 Thermal Resistance Size 2B 2BN TLR 2H Resistance (Ω) 1m 2m 20m 1m Rth (°C/W) 11.8 18.3 116 17 10m 0.5m 10m 61.1 6 62 3AW TH ＋ T＝Hs Terminal Part Temperature TH ：High TM ：Medium ＝ts TL ：Low TM ＋ T＝Hs Temperature Type Rth=(Hs-ts)/Power Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. Please refer to us before use. T T TL ＋ T＝Hs T TH TM TL Low The temperature of the resistor will increase the same ⊿T from the standard terminal part temperature regardlless of the ambient temperature when the same power is applied. This is because there is hardly any heat dissipation from the resistor surface to the ambient air. High Terminal Part Temperature Performance Characteristics Parameter Resistance T.C.R. Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Biased Humidity Endurance (Ambient Temp.) High Temperature Exposure** Requirement ∆ R ±% Limit Typical Within regulated — tolerance Within specified — T.C.R. ±0.5% ±0.3% ±0.5% ±0.4% ±0.5% ±0.1% ±0.5% ±0.1% ±1.0% ±0.3% ±1.0% ±0.6% ±2.0% –– Test Method 25°C +25°C/+125°C 260°C ± 5°C, 10 seconds +2/-0 seconds -55°C (15 minutes), +150°C (15 minutes), 1000 cycles MIL-STD-202, Method 106, 0% power, 7a and 7b not required 85°C ± 2°C, 85% RH, 1000 hours, 10% bias 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle ±155°C (2B, 2H, 3AW), 1000 hours ±170°C (2B, 2H, 3AW), 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 100 11/28/22 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com