1733 Reader's Spreads pg1-203:document
1/27/09
4:19 PM
Page 183
WF
thermal fuse built-in resistors
EU
features • Marking: Ceramic body with alpha/numeric marking • Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC
dimensions and construction
W D
Ceramic Case Cement
H
Type WF5N WF7N WF10N
4.5+2 -1 P ød
W
D
Dimensions inches (mm) H P d (R. Lead) d (Fuse Lead)
Thermal Fuse Resistor
1.00±.059 +.079 .512±.039 .354±.039 (25.5±1.5) .197 -.039 +2 ) (13.0±1.0) (9.0±1.0) 1.52±.059 (5 -1 (38.5±1.5)
+.079 .630±.039 .472±.039 1.38±.059 .295 -.039 +2 (16.0±1.0) (12±1.0) (35±1.5) (7.5 -1 )
.031 (0.8)
2A: 0.6 10A: 1.0
Lead Wire
ordering information
New Part # WF Type 5N Style 5N 7N 10N C Terminal Surface Temperature C: SnCu 8 Thermal Fuse Symbol See table below G Resistor Material G: Glass core wire wound S: Metal oxide film 100 Nominal Resistance 3 digits K Resistance Tolerance J: ±5% K: ±10%
applications and ratings
Thermal Fuse Symbol 8 10 12 14 32 33 34 35 Thermal Fuse Thermal Current Cut-off Temp. Rating 129±2 (STD) 152±2 +3 188 -1 +1 226 -3 110±2 126±2 130±2 (STD) +3 146 -2 Voltage Rating 5N 1.6 1.6 2.0 2.0 1.2 1.4 1.6 1.6 Power Rating (W) 7N 2.0 2.0 2.4 2.4 1.4 1.6 2.0 2.0 10N 2.5 2.5 3.5 3.5 –– –– –– –– Resistance Range/Material Resistance Tolerance Maximum Working Voltage Maximum Overload Voltage
G: Glass S: Metal G: Glass S: Metal Core Oxide Core Oxide Wirewound Film Wirewound Film
10A 250V 2A
1 - 100 (E24)
110 - 10k J: ±5% (E24) K: ±10%
J: ±5%
E= √ P • R
√ P • R • 6.25
E=
* Other combination of thermal cut-off temperatures and resistance values are available on request
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/06/09
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
185
circuit protection
1733 Reader's Spreads pg1-203:document
1/27/09
4:20 PM
Page 184
WF
thermal fuse built-in resistors environmental applications Derating Curve
100 Percent Rated Power (%)
Temp. Symbol
100 Percent Rated Power (%)
Temp. Symbol
80 60
10˚
80 60 40 20 0
33˚ 32˚ -25 -20 25 20 35˚ 34˚
P Temperature Rise (deg)
circuit protection
40 20
8˚ 14˚ 12˚ 133 147 140 160
0
-25 -20 0 25 20 75 40 60 80 89 100 100 120
0
40
60
68 75 91 95 105 80 100 120
140
160
Ambient Temperature (˚C)
Ambient Temperature (˚C)
Temperature Rise
200 5N 150 7N 100 10N 50 Measuring Point 2 4 6 8 Load Power (W)
For resistors operated at an ambient temperature of 25°C or above, a power rating shall be deleted in accordance with the above rating curves.
0
Performance Characteristics
Parameter Resistance T.C.R. Overload (Short Time) Resistance to Soldering Heat Moisture Resistance Load Life Requirement Limit Typical Within specified — tolerance ±250 x 10-6/K (G) — ±300 x 10-6/K (S) ±2% ±1% ±5% ±5% ±1.8% ±0.9% ±4.5% ±4.5% Test Method 25°C +25°C/-55°C and +25°C/+125°C Rated voltage x 6.25 for 5 seconds 350°C ± 10°C, 3.5 seconds 40°C, 90% - 95% RH, 500 hours, No load Rated voltage, 25°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
5/13/08
186
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
很抱歉,暂时无法提供与“WF10NC8S100K”相匹配的价格&库存,您可以联系我们找货
免费人工找货