2SA1980

2SA1980 PNP Silicon Transistor Description • General small signal amplifier PIN Connection E Features • Low collector saturation voltage : VCE(sat)=-0.3V(Max.) • Low output capacitance : Cob=4pF(Typ.) • Complementary pair with 2SC5343 B C B E C TO-92 Ordering Information Type NO. 2SA1980 Marking A1980 Package Code TO-92 Absolute Maximum Ratings Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature range (Ta=25°C) Symbol VCBO VCEO VEBO IC PC Tj Tstg Rating -50 -50 -5 -150 500 150 -55~150 Unit V V V mA mW °C °C Electrical Characteristics Characteristic Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Transition frequency Collector output capacitance Noise figure (Ta=25°C) Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE* VCE(sat) fT Cob NF Test Condition IC=-100μA, IE=0 IC=-1mA, IB=0 IE=-10μA, IC=0 VCB=-50V, IE=0 VEB=-5V, IC=0 VCE=-6V, IC=-2mA IC=-100mA, IB=-10mA VCE=-10V, IC=-1mA VCB=-10V, IE=0, f=1MHz VCE=-6V, IC=-0.1mA f=1KHz, Rg=10KΩ Min. -50 -50 -5 70 80 - Typ. Max. 4 -0.1 -0.1 700 -0.3 7 10 Unit V V V μA μA V MHz pF dB *: hFE rank / O : 70~140, Y : 120~240, G : 200~400, L : 300~700. KSD-T0A016-001 1 2SA1980 Electrical Characteristic Curves Fig. 1 PC - Ta ㎽ Fig. 2 IC - VBE Fig. 3 IC - VCE Fig. 4 hFE - IC Fig. 5 VCE(sat) - IC KSD-T0A016-001 2 2SA1980 Outline Dimension KSD-T0A016-001 3 2SA1980 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A016-001 4