KK555N

TECHNICAL DATA Timing Circuit The KK555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays, or oscillation. • • • • Direct Replacement for NE555 Timers Timing From Microseconds Through Hours Operates in Both Astable and Monostable Modes High Current Output Can Source or Sink 200 mA KK555 PIN ASSIGNMENT ORDERING INFORMATION KK555N Plastic KK555D SOIC TA = -10° to 70° C for all packages LOGIC DIAGRAM 1 KK555 MAXIMUM RATINGS Symbol VCC Tstg Supply Voltage Storage Temperature Parameter Value 18 -60 to +85 Unit V °C RECOMMENDED OPERATING CONDITIONS Symbol VCC TA Supply Voltage Operating Temperature, All Package Types Parameter Min 4.5 -10 Max 16 +70 Unit V °C ELECTRICAL CHARACTERISTICS(TA =+25°C) Symbol VOH Parameter Output Voltage High Test Conditions VCC=5.0 V, VIL =1.1 V VIH=2.6 V, IOH=100 mА VCC=15 V, VIL=4.5 V VIH=9.0 V, IOH=100 mА VCC=5.0 V, VIL =2.2 V VIH=4.0 V, IIL=5.0 mА VCC=15 V, VIL =5.6 V VIH= 11 V, IOL=10 mА VCC=15 V, VIL =0 V VIH=15 V, IOL=50 mА VCC=15 V, VIL =0 V VIH=15 V, IOL=100 mА VCC=15 V, VIH =11 V VIL =0 V VCC=5 V, VIH =4 V VIL =0 V VCC=15 V, VIH =11 V VIL =0 V VCC=15 V, VIH =10 V VIL =0 V VCC=5.0 V, VIL =0 V VIH=4.0 V VCC=15 V, VIL =11 V VIL=0 V VCC=15 V VCC=15 V Guaranteed Limits Min 12.75 2.75 0.35 0.25 0.75 2.3 9.0 2.6 11.0 4.0 mА -0.4 -0.002 0.25 0.45 6.0 15 150 150 V Max Temperature, ˚С 25±10 -10÷ +70 Unit V VOL Output Voltage Low V VREF Reference voltage IIL Low Level Input Current For pin 04 For pin 02 Input Current Supply current II 25±10 -10÷+70 25±10 -10÷ +70 µА ICC mА tOLH tOHL Rise Time of Output Fall Time of Output ns ns 2 KK555 VCC 0.9 TRIGGER tHL 0.9 OUTPUT 0.1 0.1 GND 0.1 GND VCC 0.9 tTLH tTHL Figure 1. Switching Waveforms 3 KK555 N S UFFIX PLAS TIC DIP (MS – 0 0 1BA) A 8 5 B 1 4 Dimens ion, mm Symbol A B MIN 8.51 6.1 MAX 10.16 7.11 5.33 0.36 1.14 2.54 7.62 0° 2.92 7.62 0.2 0.38 10° 3.81 8.26 0.36 0.56 1.78 F L C D C -T- SEATING N G D 0.25 (0.010) M T K PL AN E F G M H J H J K L M N NOTES : 1. Dimen s io n s “A ”, “B” d o n o t in clu d e mo ld flas h o r p ro tru s io n s . Maximu m mo ld flas h o r p ro tru s io n s 0.25 mm (0.010) p er s id e. D S UFFIX S OIC (MS - 0 1 2 AA) Dimens ion, mm 5 A 8 Symbol A B P MIN 4.8 3.8 1.35 0.33 0.4 1.27 5.72 0° 0.1 0.19 5.8 0.25 MAX 5 4 1.75 0.51 1.27 H B C 1 G 4 C R x 45 D F -TD 0.25 (0.010) M T C M K SEATI NG PLAN E G J F M H J K M P R 8° 0.25 0.25 6.2 0.5 NOTES : 1. Dimen s io ns A an d B d o n o t in clud e mo ld flas h o r p rotru s ion . 2. M aximu m mo ld flas h o r p ro tru s io n 0.15 mm (0.006) p er s id e fo r A ; fo r B ‑ 0.25 mm (0.010) p er s id e. 4