SCR0840

SCR0840 Sensitive Gate SCRs 400V, 0.8A Sensitive Gate SCRs Features Repetitive Peak Off-State Voltage : 400V R.M.S On-State Current : IT(RMS)=0.8A Low On-state Voltage : VTM=1.2V(Typ.) General Description PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-92 package which is readily adaptable for use in automatic insertion equipment. Product Characteristics IT(RMS) VDRM VTM 0.8A 400V 1.2V TO-92 Ordering Information Device SCR0840 Marking Code SCR0840 Package TO-92 Packaging Ammo Tape Marking Information SCR 0840 GYWW Grade & Rank Code (“A” Rank A, “B” Rank B) Specific Specific Device Name Weekly Code (01,02,03, ‥‥, 50, 51, 52) Year Code (2009 9, 2010 0, 2011 1) KSD-D0A001-003 1 SCR0840 Absolute Maximum Ratings (Tj=25℃ Symbol VDRM IT(RMS) IT(AV) ITSM I2t PGM PG(AV) VRGM IFGM TSTG Tj unless otherwise specified) Parameter Repetitive Peak Off-State Voltage R.M.S On-State Current (180° conduction angles) Average On-State Current (Half Sine Wave : TC=74°C) Surge On-State Current (1/2 Cycle, 60Hz, Peak, Non Repetitive) Circuit Fusing Considerations (t=8.3mS) Forward Peak Gate Power Dissipation (Ta=25°C) Forward Average Gate Power Dissipation (Ta=25°C, t=8.3mS) Reverse Peak Gate Voltage Forward Peak Gate Current Storage Temperature Range Operating Junction Temperature Ratings 400 0.8 0.5 10 0.415 0.1 0.10 5 1 -40~125 -40~125 Unit V A A A A2S W W V A °C °C Thermal Characteristics Symbol Rth(J-C) Rth(J-A) Parameter Thermal Resistance Thermal Resistance Test Conditions Junction to Case Junction to Ambient Min. Typ. 60 Max. 1.3 Unit °C/W °C/W *Rth (J-A) : t= 10sec KSD-D0A001-003 2 SCR0840 Electrical Characteristics (Ta=25℃) Symbol A IGT B Parameter Gate Trigger Current(1) Test Conditions VAK=7V, RL=100Ω VAK=7V, RL=100Ω, Ta=25°C VAK=7V, RL=100Ω, Ta=-40°C VAK=12V, RL=100Ω, Ta=125°C VAK=12V, Gate open, Initiating current=50mA Ta=25°C Ta=-40°C VAK=VDRM or VRRM, TC=25°C VAK=VDRM or VRRM, TC=125°C ITM=1A, Peak Min. 15 0.2 Typ. Max. 200 30 0.8 1.2 µA V V V Unit VGT VGD Gate Trigger Voltage(1) Non Trigger Gate Voltage IH Holding Current Repetitive Peak Off-Stage Current Peak On-Stage Voltage(2) - 2 1.2 5 10 10 200 1.7 mA mA µA µA V IDRM VTM - (1) RGK Current is not included in measurement (2) Forward current applied for 1ms maximum duration, duty cycle ≤1% KSD-D0A001-003 3 SCR0840 Electrical Characteristic Curves Fig. 1 IGT - Junction Temperature Fig. 2 VGT - Junction Temperature ㎂ Fig. 3 IH - Junction Temperature Fig. 4 IL - Junction Temperature ㎂ ㎂ Fig. 5 Current Derating [ Ref. : Case Temp. ] α α Fig. 6 Current Derating [ Ref. : Ambient Temp ] α α α α α α α α α α KSD-D0A001-003 4 SCR0840 Package Outline Dimension KSD-D0A001-003 5 SCR0840 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0A001-003 6