SDZ5V6AWA

SDZ5V6AWA Low Cap. ESD Protection Zener Diode ESD Protection Zener Diode General Description SDZ5V6AWA in small SOT-23 SMD plastic package designed to protect one data line from the damage caused by Electro Static Discharge (ESD) and other transients. Features and Benefits  ESD protection of one data line  Transient protection for data lines to IEC 61000-4-2 (ESD) Air discharge mode: ±15kV, Contact discharge mode: ±8kV  Small package for use in portable equipment  Full lead(Pb)-free device and RoHS compliant  Available in “Green” device SOT-23 Applications  ESD protection Ordering Information Part Number Marking Code Package Packaging SDZ5V6AWA Z3E □ SOT-23 Tape & Reel Marking Information Z3E □ Z3E = Specific Device Code □ = Year & Week Code Marking Pinning Information Pin 1 2 3 Rev. date: 29-NOV-10 Description Cathode (Diode 1) Cathode (Diode 2) Common Anode KSD-D5C010-003 www.auk.co.kr 1 of 5 Simplified Outline Graphic Symbol SDZ5V6AWA Absolute Maximum Ratings (Tamb=25℃, Unless otherwise specified) Characteristic Peak Pulse Power (tp = 8/20㎲) Power dissipation 1) Junction temperature Storage temperature range 1) Symbol PPK PD TJ Tstg Ratings 100 200 150 -55 ~ 150 Unit W mW C C Device mounted on FR-4 board with recommended pad layout. Thermal Characteristics (Tamb=25℃, Unless otherwise specified) Characteristic Thermal resistance, junction to ambient 1) 1) Symbol Rth(j-a) Ratings 625 Unit C/W Device mounted on FR-4 board with recommended pad layout. Electrical Characteristics (Tamb=25℃, Unless otherwise specified) Characteristic Zener voltage Dynamic impedance KNEE dynamic impedance Reverse current Total capacitance Symbol VZ ZZT ZZK IR CT Test Condition IZ=5mA IZ=5mA IZ=0.5mA VR=2.5V VR=0V, f=1MHz Min. 5.31 Typ. 30 Max. 5.92 60 200 1 Unit V   uA pF Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 2 of 5 SDZ5V6AWA Rating and Characteristic Curves Fig. 1) Typical Zener Characteristics Fig. 2) Power Dissipation vs. Ambient Temperature Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 3 of 5 SDZ5V6AWA Package Outline Dimensions ※ Recommend PCB solder land (Unit : mm) Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 4 of 5 SDZ5V6AWA The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 29-NOV-10 KSD-D5C010-003 www.auk.co.kr 5 of 5