SRC1210S

SRC1210S NPN Silicon Transistor Descriptions • Switching application • Interface circuit and driver circuit application PIN Connection OUT Features • With built-in bias resistor • Simplify circuit design • Reduce a quantity of parts and manufacturing process • High packing density IN COMMON OUT IN R1 R1 = 4.7KΩ Ordering Information Type NO. SRC1210S Marking RCA □ ① ② ①Device Code ②Year&Week Code COMMON Package Code SOT-23 Absolute Maximum Ratings Characteristic Output voltage Input voltage Output current Power dissipation Junction temperature Storage temperature range (Ta=25°C) Symbol VO VI IO PD TJ Tstg Rating 50 20, -5 100 200 150 -55 ~ 150 Unit V V mA mW °C °C Electrical Characteristics Characteristic Output cut-off current DC current gain Output voltage Input voltage (ON) Input voltage (OFF) Transition frequency Input current Input resistor (Input to base) (Ta=25°C) Symbol IO(OFF) GI VO(ON) VI(ON) VI(OFF) fT * II R1 Test Condition VO=50V, VI=0 VO=5V, IO=10mA IO=10mA, II=0.5mA VO=0.2V, IO=5mA VO=5V, IO=0.1mA VO=10V, IO=5mA, f=1MHz VI=5V, IO=0 - Min. Typ. Max. 120 0.3 3.3 0.1 0.8 0.55 200 4.7 500 0.3 1.2 1.8 6.1 Unit nA V V V MHz mA KΩ * : Characteristic of transistor only KSD-R5C015-000 1 SRC1210S Electrical Characteristic Curves Fig. 2 IO - VI(ON) Fig. 1 PD - Ta Fig. 3 IO - VI(OFF) Fig. 4 GI - IO ㎂ KSD-R5C015-000 2 SRC1210S Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-R5C015-000 3 SRC1210S The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-R5C015-000 4