STS9014

STS9014 NPN Silicon Transistor Description • General purpose application • Switching application PIN Connection C Features • Excellent hFE linearity : hFE(IC=0.1 mA) / hFE(IC=2 mA) = 0.95(Typ.) • Low noise : NF=10dB(Max.) at f=1KHz • Complementary pair with STS9015 C B E B E TO-92 Package Code TO-92 Ordering Information Type NO. STS9014 Marking STS9014 Absolute maximum ratings Characteristic Collector-Base voltage Collector-Emitter voltage Emitter-Base voltage Collector current Emitter current Collector dissipation Junction temperature Storage temperature (Ta=25°C) Symbol VCBO VCEO VEBO IC IE PC Tj Tstg Ratings 60 50 5 150 -150 625 150 -55~150 Unit V V V mA mA mW °C °C Electrical Characteristics Characteristic Collector cut-off current Emitter cut-off current DC current gain Collector-Emitter saturation voltage Transistion frequency Collector output capacitance Noise figure (Ta=25°C) Symbol ICBO IEBO hFE fT Cob NF * Test Condition VCB=50V, IE=0 VEB=5V, IC=0 VCE=5V, IC=1mA IC=100mA, IB=10mA VCE=10V, IC=1mA VCB=10V, IE=0, f=1MHz VCB=6V, IC=0.1mA, f=1KHz, Rg=10KΩ Min. Typ. Max. 100 60 0.1 2 50 100 1000 0.25 3.5 10 Unit nA nA V MHz pF dB VCE(sat) * : hFE rank / B : 100 ~ 300, C : 200 ~ 600, D : 400 ~ 1000. KSD-T0A048-000 1 STS9014 Electrical Characteristic Curves Fig. 1 PC –Ta Fig. 2 IC -VBE 5 Fig. 3 IC -VCE Fig. 4 hFE -IC Fig. 5 VCE(sat) -IC KSD-T0A048-000 2 STS9014 Outline Dimension KSD-T0A048-000 3 STS9014 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A048-000 4